Photographing small components
You want to capture lettering, solder joints or a single component so it fills the frame. Compare the lens’s stated maximum magnification: Cameranu points out that ‘macro’ in a product name doesn’t always mean 1:1.
First, choose a lens mount that fits your camera, then decide whether you want to photograph an entire circuit board, a component or a tiny detail. For larger details, a compact lens with lower magnification may be enough; for small components, 1:1 magnification or higher and sufficient working distance can be useful. Bear in mind that higher magnification doesn’t automatically give you greater depth of field.
You want to capture lettering, solder joints or a single component so it fills the frame. Compare the lens’s stated maximum magnification: Cameranu points out that ‘macro’ in a product name doesn’t always mean 1:1.
You’re photographing a stationary circuit board and want room for your setup and the incoming light. Check the working distance in front of the lens, and bear in mind that shooting close up limits depth of field, as Nikon explains in its macro photography information.
You’re looking for a lens for your current camera. Check the exact mount and version: the Canon, Nikon, Sony, Sigma and Laowa examples mentioned aren’t all made for the same camera system.
First, check the mount is compatible with your camera. Then choose a magnification to suit your subject, and consider the space available and focusing method for your window-light setup.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Mount and compatibility | Check the exact lens mount and version for your camera body; the brand name alone isn’t enough. | I want to be sure the lens fits my existing camera before comparing other features. This would be the first priority for around 25% of consumers. |
| Magnification | Compare the maximum reproduction ratio of the exact lens: Canon lists 0.5× for the RF 85mm F2 MACRO IS STM, Nikon lists 1:1 for the Z MC 50mm f/2.8, and Laowa lists 2:1 for the Sony FE version mentioned. | If I want a very small component to fill the frame, the magnification needs to be right for the job. This would be the top priority for around 25% of consumers. |
| Depth of field and stability | Depth of field can be shallow when shooting close up. Canon Europe describes focus stacking as combining shots taken at different focus points; check that this technique suits your camera and subject. | I want more of a stationary component in focus in window light, so I may need a stable setup. This would be the main priority for around 19% of consumers. |
| Working distance | Check the distance in front of the lens at the magnification you want to use. Nikon quotes approximately 5 cm for the Z MC 50mm f/2.8; Sigma lists 141 mm at 1:1 for the 105mm F2.8 DG DN MACRO | Art. | If I need room to position a circuit board and let window light fall on the subject, working space matters. This would be the most important factor for around 19% of consumers. |
| Total cost and setup | First, work out how much magnification you really need. Cameranu lists extension tubes and close-up filters as alternatives; check that any accessory is compatible with your lens and camera. | I want to know whether I need a dedicated macro lens for the level of detail I’m after, rather than buying features I won’t use. This would be the main consideration for around 12% of consumers. |
According to Canon, the Canon RF 85mm F2 MACRO IS STM achieves a maximum magnification of 0.5×. That may be enough for larger details, but it’s not the same as a lens that reaches 1:1.
Choose a maximum reproduction ratio that suits the framing you want, and check the specifications for the exact version.
Canon’s RF macro lenses offer different maximum magnifications: according to Canon, the RF 85mm F2 MACRO IS STM reaches 0.5×, while the RF 100mm F2.8L Macro IS USM reaches 1.4×.
According to Nikon, the NIKKOR Z MC 50mm f/2.8 is a compact Z macro lens with 1:1 magnification, suitable for Z cameras with full-frame and DX sensors.
Sony lists 1:1 magnification and built-in optical stabilisation for the FE 90mm F2.8 Macro G OSS.
The Sigma 105mm F2.8 DG DN MACRO | Art is a 1:1 option for the Sony E and L mounts listed by Sigma.
The Dutch product page lists 2:1 magnification and manual focus for the Laowa 90mm f/2.8 2X Ultra-Macro APO for Sony FE.
No, the term doesn’t guarantee 1:1 magnification. Canon lists a maximum of 0.5× for the RF 85mm F2 MACRO IS STM, while Nikon specifies 1:1 for the Z MC 50mm f/2.8. Check the maximum reproduction ratio for the exact version.
Set up your camera securely and see whether you can take shots at different focus points. Focus stacking can combine them into an image with greater depth of field. Check whether your camera can automate this or whether you’ll need to take and combine the shots yourself.
Check the working distance in front of the lens at the magnification you want to use. The minimum focusing distance alone doesn’t tell you how much room there’ll be in front of the lens for your subject and the incoming light.
Check the mount before buying. For online purchases by consumers in the Netherlands, ACM ConsuWijzer says you generally have a cooling-off period of up to 14 days after delivery, subject to legal exceptions. You also have statutory rights if a product is faulty, and the seller is responsible for this. Check the terms that apply to your order and report any problem to the seller.