Detail photographer
You want to capture small components or connections in close-up, so you’re comparing the maximum magnification of the exact lens version.
Start with your camera’s mount, then choose a magnification suited to the smallest component you want to fill the frame. Sony Netherlands describes maximum magnification as the size at which a subject is reproduced at the minimum focusing distance. Higher magnification can help you capture tiny details, but you’ll also need to consider focus and lighting. Focus stacking can help keep more of a component in focus.
You want to capture small components or connections in close-up, so you’re comparing the maximum magnification of the exact lens version.
You also want to show larger parts of your work clearly and in focus, so maximum magnification isn’t your only consideration.
You take photos at a workbench and want to leave enough room in front of the lens to light your electronic subject.
First compare the mount, then work out how small the detail is that you want to show. Finally, check the working distance and how much of the component you want in focus.
Bear in mind: 0.5× offers less magnification than the 1:1 and higher-magnification macro lenses discussed here.
A good fit if: you want to capture lettering, connections or individual components at a larger size.
Bear in mind: check the working distance at your chosen magnification. The minimum focusing distance doesn’t tell you how much clear space there is in front of the lens.
A good fit if: a tiny component still looks too small in the frame at 1:1.
Bear in mind: check the mount and controls on the exact version. Extra magnification doesn’t replace suitable lighting or a way to manage depth of field.
| What to consider | What should you look for? | Who is this important for? |
|---|---|---|
| Compatibility with your camera | Note your camera model and mount, then compare them with the full name and mount of the lens version on offer. | If I want to keep using my current camera, I’ll first check that the lens version is compatible. Around 33% of consumers give compatibility their top priority. |
| Capturing small details at a larger size | Compare the maximum magnification of the exact version: Canon Europe lists 0.5× for the RF 85mm F2 Macro IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM; Sony Netherlands lists 1.0× for the FE 90mm F2.8 Macro G OSS. Laowa specifies 2:1 for the 100mm f/2.8 2X Ultra Macro APO. | I want the smallest component to fill the frame, so I look at maximum magnification. Around 27% of consumers put magnification for detail first. |
| Room for lighting | Look for the working distance at the magnification you want to use. Sony gives around 13 cm for the FE 90mm; Sigma lists 141 mm at 1:1 for the 105mm DG DN Macro. | I want to leave room in front of the lens for lighting, so I check the distance to the subject at my intended magnification. For around 20% of consumers, room for lighting is a top priority. |
| Keeping the component in focus | Decide whether one plane of focus is enough or whether you want to combine several shots taken at different focus points using focus stacking. Check which shooting features are available on your camera. | If I want to show a component clearly from front to back, I consider how focus is distributed and whether I can combine shots. Around 20% of consumers give this need their top priority. |
According to Canon, the Canon RF 85mm F2 Macro IS STM has a maximum magnification of 0.5×, which is lower than the 1:1 and higher-magnification versions discussed here.
Compare the maximum magnification of the exact model with the smallest component you want to photograph.
The minimum focusing distance is measured from the sensor; the working distance is the space from the front of the lens to the subject.
Before setting up your workbench and lighting, check the working distance at the magnification you want to use.
You may need to reposition your lights to fit around the lens and subject.
Macro photography can have a limited depth of field. Focus stacking can increase the area in focus by combining shots taken at different focus points.
Decide whether you want to isolate one detail or show more of the component in focus. For the latter, consider taking several shots at different focus points.
Combining several shots takes extra time both when shooting and during post-processing.
A lens must match your camera’s mount. The aperture controls on the Laowa 100mm f/2.8 2X Ultra Macro APO vary by version.
Check your camera model, the full lens name, the mount and the controls on the specific version.
According to Laowa, only the Canon EF version has camera-controlled aperture; the other versions have manual controls.
For EOS R users comparing the RF 85mm F2 Macro IS STM with the higher-magnification RF 100mm F2.8L Macro IS USM.
The FE 90mm F2.8 Macro G OSS is a 1:1 macro option with an E-mount for a compatible Sony camera.
The NIKKOR Z MC 105mm f/2.8 VR S is designed for macro and close-up photography with a compatible Nikon Z camera.
The 105mm F2.8 DG DN MACRO | Art is a 1:1 option in the Sony E-mount and L-mount versions listed by Sigma.
The 100mm f/2.8 2X Ultra Macro APO is designed for photographers looking for more than 1:1 magnification.
The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO offers a Micro Four Thirds route to high magnification.
It depends on the size of the component and how tightly you want to crop. 0.5× may suit larger project details; consider 1:1 or higher if you want a very small component to fill the frame.
No. The minimum focusing distance is measured from the sensor; the working distance is measured from the front of the lens to the subject. Before setting up your lighting, check the working distance at your chosen magnification.
For a stationary subject, you can take several shots at different focus points and combine them using focus stacking. Extra light can help if you want to use a smaller aperture; check how to take the shots on your own camera.
For an eligible online consumer purchase, you have a statutory 14-day cooling-off period. According to ACM ConsuWijzer, this period runs until 14 days after delivery. Check whether an exception applies to your purchase. Your statutory guarantee is separate from any manufacturer’s warranty: if the product develops a fault sooner than you could reasonably expect under normal use, the seller must put things right free of charge.