Who is this choice relevant to?

Online retailer selling small components

Wants to show model numbers and fine connectors clearly, and needs to match the desired magnification to their camera.

Photographer capturing complete circuit boards

Needs more than close-up shots: the whole circuit board must also be sharp and easy to inspect. Depth of field and a stable setup both play a part.

Maker with limited space for a setup

Needs to position a lens, camera and lighting around small, reflective components. The space in front of the lens is therefore a practical consideration.

What should you look for when buying?

First check that the lens is compatible with your camera. Then decide what magnification you need to show your details, and compare the working space and sharpness required for a complete product shot.

Consideration What to look for when buying Who is this most relevant to?
Camera compatibility Make a note of your camera model and lens mount, then check these against the exact version of the lens. The mounts of the models listed differ. If I want to keep using my current camera, the mount needs to fit before magnification or working distance can be of any use. Around 29% of consumers prioritise compatibility with their existing camera.
Legibility of small details Compare the maximum magnification of the exact version. Canon Europe specifies a maximum of 1.4× for the RF 100mm F2.8L Macro IS USM; Laowa lists 2:1 for the 100mm f/2.8 2x Ultra Macro APO. If I want to show small model numbers or solder points clearly, I compare the magnification with the crop I need. Around 23% of consumers prioritise legibility of very small details.
Room for lighting Compare the working distance at the magnification you want, not just the minimum focusing distance. Nikon Netherlands gives approximately 5 cm between the front of the Z MC 50mm f/2.8 and the subject at the minimum focusing distance; Sigma lists a working distance of 141 mm at 1:1 for the 105mm F2.8 DG DN MACRO | Art. If I want to position lighting around a small component, I need space for it as well as for the camera and lens. Around 18% of consumers prioritise this working space.
Sharpness across the whole circuit board Consider whether a single shot will provide enough depth of field. Canon Europe describes focus stacking as combining shots taken at different focus distances; check that your camera and processing method are suitable. If I want to show a complete circuit board, sharpness across the product matters more than simply capturing a highly magnified detail. Around 18% of consumers prioritise showing the whole product.
Purchasing and business terms Check the terms that apply to your type of order, and allow for any additional setup or processing. KVK explains that businesses do not automatically have the same protections as consumers. If I’m ordering as a business, I want to know in advance which terms apply to my type of purchase and what the product requires in practice. Around 12% of consumers prioritise purchasing and ordering terms.

Pitfalls to avoid when buying

  • Confusing minimum focusing distance with the clear space in front of the lens

    The minimum focusing distance does not tell you how much room is left in front of the lens for lighting. Nikon Netherlands gives approximately 5 cm between the front of the Z MC 50mm f/2.8 and the subject at the minimum focusing distance; for its 105mm model, Sigma lists the working distance at 1:1.

    Compare the working distance at the magnification you actually plan to use, and check that your lighting will fit into the setup.

  • Assuming higher magnification means a fully sharp product photo

    A high maximum magnification does not mean that an entire circuit board will be sharp in a single shot. Canon Europe describes focus stacking as a method of combining shots taken at different focus distances.

    Assess the sharpness of both small details and the entire product. If depth of field is insufficient, consider using a stable setup and focus stacking, provided your camera and processing method support this approach.

  • Ordering a version without checking the mount and controls

    Similar model names can refer to different mounts or controls. Sigma offers the 105mm version listed in Sony E and L mounts; Laowa states that versions other than the Canon EF model have manual controls and aperture settings.

    Before buying, check the full model name, mount and controls for the specific version.

  • Assuming a business order has the same terms as a personal purchase

    According to KVK, businesses and consumers are not automatically protected in the same way; a small business may sometimes be able to rely on consumer law, but only under certain conditions.

    Read the terms that apply to your type of contract and order before buying.

Relevant brands to consider

Nikon

For Nikon Z cameras, the NIKKOR Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are models with a stated reproduction ratio of 1:1.

  • Nikon Netherlands gives approximately 5 cm between the front of the Z MC 50mm f/2.8 and the subject at the minimum focusing distance.
  • With this 50mm version, allow for limited space for lighting; this distance does not automatically apply to the 105mm.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available in Sony E and L mount versions and has a stated maximum magnification of 1:1.

  • Sigma lists a working distance of 141 mm at 1:1 for this model.
  • Check which mount your camera uses; the quoted working distance is a manufacturer specification, not the result of a comparative practical test.

Tamron

According to Tamron, the 90mm F/2.8 Di III MACRO VXD is available for Sony E and Nikon Z and has a stated maximum magnification of 1:1.

  • Tamron says this model offers flat-field correction for flat subjects.
  • The claim about flat subjects comes from the manufacturer and is not an independent comparison with other lenses. Check that you have the right mount.

Canon

The Canon RF 100mm F2.8L Macro IS USM is a lens for Canon RF cameras.

  • Canon Europe specifies a maximum magnification of 1.4× for this model.
  • This specification does not guarantee that every product shot will be fully sharp without adjusted focusing or lighting.

Laowa

According to the manufacturer, the Laowa 100mm f/2.8 2x Ultra Macro APO is designed to offer a maximum magnification of 2:1.

  • The stated magnification may be useful when details do not appear large enough at 1:1.
  • Laowa states that, except for the Canon EF version, the controls and aperture settings are manual. Check the exact mount and how the lens operates.

Joybuy products

Related products coming soon.

Frequently asked questions

Is 1:1 magnification enough for your electronic components?

It depends on the smallest markings and the crop you need. First, check how those details look on your own camera. Canon Europe specifies a maximum of 1.4× for the RF 100mm F2.8L Macro IS USM, while Laowa lists 2:1 for the 100mm f/2.8 2x Ultra Macro APO.

How can you get a whole circuit board sharp in a photo?

Set up the camera and product on a stable surface, then check whether a single shot provides enough depth of field. If not, you can combine shots taken at different focus distances using a suitable camera and processing method; Canon Europe recommends a sturdy tripod for this kind of sequence.

How should you maintain your lens if you use it frequently?

Follow the instructions for your make and model. For the relevant camera and lens cleaning, Sony recommends using a blower to remove dust from the lens surface, then replacing the lens cap. Its sensor-cleaning instructions are not automatically a general cleaning method for all equipment.

Do consumer returns and protections also apply to business purchases?

Not automatically. KVK explains that businesses are generally protected differently from consumers, and a small business may only be able to rely on consumer law under certain conditions. Check the contract and the terms for your order.

What should you consider when adding photos to your Dutch online shop?

If you sell online to consumers, information about the products you offer must be clear and accurate, and you must not mislead customers. Check that the version and visible features shown match what you are selling. The information from Ondernemersplein of the Netherlands Enterprise Agency does not recommend a specific macro lens.