Who is this buying guide for?

Flower detail photographer

You want to capture veins, seeds or delicate textures in close-up. That means comparing magnification with the space you need to focus and position your lighting.

Still-life creator

You want to include both the dried flower and part of your small table in a single composition. As well as magnification, you’ll need to consider the angle of view and the space available for setting up.

Layered bouquet photographer

You want to bring several petals into focus, so you’ll also need to check which focus bracketing features your camera body supports.

What should you look for when buying?

Start by checking that the mount is compatible with your camera. Then work out how much magnification and working distance you need for your subject and lighting setup.

What to consider What to look for Who is this important for?
Compatibility Check the exact camera body, lens mount and supported sensor format. I want to make sure the lens fits my camera before comparing other features. Around 31% of consumers prioritise system compatibility.
Magnification Compare the maximum magnification of the exact model. Canon Netherlands specifies 1:2 for the RF 35mm F1.8 MACRO IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM; Sony Netherlands lists 1:1 for the FE 90mm F2.8 Macro G OSS. If I want to fill the frame with veins or tiny seeds, magnification is an important consideration. Around 25% of consumers prioritise fine detail.
Working distance and framing Measure the space around your table and distinguish the minimum focusing distance from the working distance. Fujifilm lists around 1.2 cm between the front of the lens and the subject at 1:1 for the XF30mmF2.8 R LM WR Macro; Sigma gives a working distance of 141 mm at 1:1 for the 105mm F2.8 DG DN MACRO | Art. I want to position my camera and lighting around a delicate flower without losing the composition I want. Around 25% of consumers prioritise setup space and composition.
Depth of field Check whether your camera body supports focus bracketing or focus stacking. Canon gives the EOS R7 and EOS R10 as examples with built-in focus bracketing and focus stacking features. When I want several layers of a still bouquet to be in focus, I also consider the capabilities of my camera body. Around 19% of consumers prioritise depth of field.

Common pitfalls

  • Assuming ‘macro’ in the name guarantees 1:1

    Maximum magnification varies between models. Canon Netherlands specifies a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM, which is less than 1:1.

    Choose based on the stated maximum reproduction ratio and the detail you want to photograph, not just the product name.

  • Confusing minimum focusing distance with the space in front of the lens

    Minimum focusing distance is measured from a different reference point than the clear working space between the front of the lens and the flower. That difference can matter when positioning lighting beside delicate dried flowers.

    Compare the working distance at the magnification you actually plan to use, and allow for the space available on your table.

  • Choosing a lens alone to get an entire bouquet in focus

    Depth of field can be shallow in close-up photography. The focus bracketing features available vary between camera bodies.

    Check that your camera supports the feature you want, and plan how you’ll take and potentially combine the shots.

    Taking and combining a series of shots can take extra time.

Relevant macro lens brands

Canon

For compatible Canon RF cameras, there are models for both close-ups and higher magnification.

  • Canon Netherlands specifies a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM.
  • Check the RF mount and choose a magnification that suits your subject; you don’t need higher magnification for every flower.

Sony

The FE 90mm F2.8 Macro G OSS is an option for a compatible Sony E-mount camera when you want to photograph individual flower details.

  • Sony Netherlands lists 1:1 magnification, optical stabilisation, a minimum focusing distance of 0.28 m and a lens weight of 602 g for this model.
  • The minimum focusing distance doesn’t tell you directly how much clear space there is in front of the lens; the stated weight is for the lens, not the complete camera setup.

Fujifilm

The XF30mmF2.8 R LM WR Macro is designed for a compatible Fujifilm X camera and may suit close-ups that include some of the table in the frame.

  • Fujifilm specifies 1:1 magnification and a weight of around 195 g for this lens.
  • At 1:1, Fujifilm lists around 1.2 cm between the front of the lens and the subject. This could limit the space available for lighting delicate dried flowers.

OM SYSTEM

For a compatible Micro Four Thirds system, there are macro lenses for different levels of detail.

  • OM SYSTEM specifies 2× magnification for the M.Zuiko Digital ED 90mm F3.5 Macro IS PRO and 1:1 for the M.Zuiko Digital ED 60mm F2.8 Macro.
  • These magnifications apply to different models; you don’t need 2× magnification for every full-flower shot.

Sigma

The 105mm F2.8 DG DN MACRO | Art offers 1:1 magnification for a compatible Sony E-mount or L-mount camera.

  • Sigma lists a working distance of 141 mm at 1:1 for this model.
  • Allow space behind the camera too: a longer focal length may require more room to set up on a small table.

Nikon

The NIKKOR Z MC 50mm f/2.8 is a macro lens for a compatible Nikon Z camera.

  • Nikon lists a life-size 1:1 reproduction ratio for this specific model and also positions it for everyday photography.
  • Nikon notes that the front of the lens can be just a few centimetres from the subject during close-ups, so consider the space you’ll need for your lighting setup.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens to photograph an entire dried flower?

No, not if you want to show the flower with part of the table; choose the magnification to suit the framing you want. For example, Canon Netherlands specifies 1:2 for the RF 35mm F1.8 MACRO IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM.

How can I tell how much space there is in front of the lens?

Look up the working distance at the magnification you want to use, and don’t treat it as the same measurement as minimum focusing distance. For the XF30mmF2.8 R LM WR Macro, Fujifilm lists around 1.2 cm between the front of the lens and the subject at 1:1; Sigma gives a working distance of 141 mm at 1:1 for the 105mm F2.8 DG DN MACRO | Art.

How can I get several petals in focus?

Depth of field can be shallow in close-up photography. Keep your setup still and check whether your camera body supports focus bracketing with your chosen lens, and whether you can combine the shots afterwards. Canon gives the EOS R7 and EOS R10 as examples with built-in features.

Will any macro lens fit my camera?

No. Before buying, check the exact mount and compatibility with your camera body. A suitable magnification won’t make a lens with an incompatible mount usable with your camera.