Who is this guide for?

Photographers with an existing camera

You’re looking for a lens that fits your camera’s mount and sensor format. Nikon, Sigma, Tamron and Laowa offer versions with different mounts or sensor formats.

Flower detail photographers using studio lights

You want to light the texture of a flower without the lens getting in the way of your lighting setup. Nikon and Sony explain why the space between the subject and the front of the lens matters.

Photographers capturing very small details

You want to make details such as veins or seeds appear large in the frame, and can take the time to focus precisely. Canon and Laowa offer specific versions with magnification greater than 1:1.

What should you look for when buying?

Start with your camera’s mount and sensor format. Then choose the magnification and working distance that suit the flower detail and your lighting setup.

What to consider What should you look for? Who should prioritise it?
Mount and sensor format Check the full camera model name, the mount and the sensor format supported by the exact lens version. I want to make sure the lens fits my camera body first. Around 33% of this group prioritise the mount and sensor format.
Space for your lighting Look up the working distance at the magnification you plan to use. The minimum focusing distance, measured from the sensor plane, is not the same as the clear space in front of the lens. When lighting a dried flower, I want to leave room for a lamp or diffuser. Around 27% of this group prioritise space for their lighting.
Magnification for fine detail Compare the maximum magnification of the exact model and consider whether the detail will appear large enough at 1:1. I want to capture small flower structures large on the sensor. Around 20% of this group prioritise extra magnification for detail.
Sharpness and colour Check the focusing controls and which tripod, white balance or bracketing features your camera supports. For a fixed lighting setup, I want to control sharpness and colour in every shot. Around 20% of this group prioritise control over their images.

Common buying pitfalls

  • Assuming ‘macro’ means confirmed 1:1 magnification

    The name alone doesn’t tell you the maximum reproduction ratio of the exact lens version. This ratio determines how large a subject can appear on the sensor.

    Compare the stated maximum magnification of the full model with the size of the flower detail you want to capture.

  • Confusing minimum focusing distance with working distance

    The minimum focusing distance is measured from the sensor plane, so it doesn’t tell you how much clear space is left in front of the lens. Nikon states that, at its closest focusing distance, the Z MC 50mm f/2.8 leaves around 5 cm between the subject and the front of the lens.

    Check the working distance at the magnification you plan to use, and allow for the positions of the flower, lens and lamp in your setup.

  • Thinking stabilisation guarantees sharp macro photos

    Stabilisation and depth of field are different things. Canon states that the RF 100mm F2.8L Macro IS USM offers up to 5 stops of optical stabilisation, but 2 stops at 1.0x under the stated test standards.

    Assess focus and depth of field separately. For a fixed setup, use a tripod if needed.

Brands to compare

Nikon

For Nikon Z cameras, Nikon describes the Z MC 50mm f/2.8 as a 1:1 macro lens for compact setups and general use. The Z MC 105mm f/2.8 VR S is a longer 1:1 option.

  • Nikon states that, at its closest focusing distance, the 50mm leaves around 5 cm between the subject and the front of the lens.
  • Check that the mount and features of the exact version suit your camera. The stated distance applies specifically to the 50mm at that focusing distance.

Canon

For Canon EOS R cameras, Canon describes the RF 100mm F2.8L Macro IS USM as offering a maximum magnification of 1.4x.

  • Canon specifies up to 5 stops of optical stabilisation.
  • Canon states 2 stops at 1.0x under the stated test standards, so 5 stops is not a general figure for every macro shot. RF and EF versions have different mounts.

Sigma

According to Sigma, the Sigma 105mm F2.8 DG DN MACRO | Art is a 1:1 lens for Sony E-mount or L-Mount mirrorless cameras.

  • Sigma states a minimum focusing distance of 29.5 cm for both mounts.
  • This isn’t the same as the clear working space in front of the lens. Check the mount of the version you’re considering and the working distance at your intended magnification.

Tamron

According to Tamron, the Tamron 90mm F/2.8 Di III MACRO VXD, model F072, is a 1:1 lens for Sony E and Nikon Z.

  • Tamron gives a minimum object distance of 0.23 m.
  • The minimum object distance alone doesn’t tell you how much clear space there is in front of the lens. Also check the mount of the specific version.

Laowa

Laowa describes the 65mm f/2.8 2X Ultra-Macro for APS-C cameras as a manual lens with a maximum magnification of 2:1.

  • The extra magnification may suit very small details that you want to capture at greater than 1:1.
  • The stated Sony E and Canon RF versions require manual focusing. Laowa also states that the Sony E version has no electronic coupling, so check the controls on the version you choose.

Products at Joybuy

Related products will be available soon.

Frequently asked questions

Do I need 1:1 magnification to photograph an entire dried flower?

No, 1:1 isn’t essential for photographing an entire dried flower. First decide how large you want the flower to appear in the frame, then compare the maximum magnification of the exact lens version.

How can I avoid blurry photos of a stationary flower?

Set your camera up securely, focus precisely on the detail you want and assess the depth of field. Sony Alpha Universe also describes taking a series of shots with different focus points for a stationary subject. This can help if your camera and technique support it.

How can I avoid a colour cast under artificial light?

Check the white balance for the light source you’re using. Canon Netherlands explains that artificial light can, for example, give images a yellow cast if it isn’t corrected. A different macro lens won’t change that colour setting.

What are my rights when buying a lens online in the Netherlands?

When you buy from a business at a distance as a consumer, you generally have 14 days to change your mind. According to the Dutch government, you’re also entitled to a product that works as it should under the statutory guarantee. There’s no fixed period for this in the Netherlands, and you can contact the seller to arrange a solution. A manufacturer’s guarantee is in addition to this.