First, choose a macro lens with the right mount for your camera, then match the magnification to the smallest detail you want to photograph. Check that there’s enough clearance in front of the lens for your lighting, too. Higher magnification can reduce depth of field, so you may need to use focus stacking to keep a three-dimensional accessory sharp from front to back.
Who is this choice relevant to?
Accessory maker looking to show off the details
You want to bring out small fastenings, embellishments or material textures, so choose a magnification that captures the detail you need. Canon Europe explains that 1:1 magnification reproduces a small subject at life size on the camera sensor.
Maker of white-background product photos
You take repeatable shots of accessories on a white background and need enough room to position your lighting without unwanted shadows or reflections. Sony Netherlands gives a working distance of around 13 cm in front of the lens for the FE 90mm Macro, while Orbitvu Netherlands highlights the importance of precise lighting in product photography.
Photographer of complete accessories
You want a complete, three-dimensional accessory to appear sharp, and need to weigh up a suitable close-up composition against taking extra shots for focus stacking. Canon Europe describes focus stacking as combining images taken at different focus points.
What should you look for when choosing?
Close-ups up to 0.5×
Choose this if: you mainly photograph complete accessories or larger components with a Canon EOS R camera and don’t need 1:1 reproduction. Canon specifies a maximum magnification of 0.5× for the RF 85mm F2 MACRO IS STM.
Trade-off: 0.5× isn’t 1:1, so check that your smallest required detail will appear large enough in the frame.
1:1 for small details
Choose this if: you want to capture fastenings, stitching or embellishments at life size on the sensor, and need a lens version that fits your mount. Examples include the Nikon Z MC 50mm, the Sony FE 90mm, the Sigma 105mm for Sony E or L-Mount, and the Tamron 90mm for Sony E or Nikon Z. Their manufacturers specify 1:1 magnification for these models.
Trade-off: the clearance in front of the lens varies by model and can affect how you position lights around the accessory.
More than 1:1
Choose this if: you want to capture tiny individual components at extra-large magnification and can position them precisely. Canon specifies a maximum of 1.4× for the RF 100mm F2.8L Macro IS USM; Sony specifies a maximum of 1.4× for the FE 100mm F2.8 Macro GM OSS.
Trade-off: higher magnification won’t automatically keep the whole accessory sharp. For the Canon RF version of the Laowa 90mm f/2.8 2X Ultra-Macro APO reviewed here, Laowa specifies manual focus, and the retailer recommends using a tripod or macro rail at 2×.
| What to consider |
What to check before buying |
Who is this important to? |
| Will the lens fit my camera? |
Check your camera model, mount and the exact version of the lens. |
I want a lens that fits my existing camera body before weighing up magnification or other features; that’s why around 31% of shoppers rank compatibility as their top buying priority. |
| How large will the smallest detail appear in the frame? |
Compare the framing you need with the maximum magnification of the exact model, for example 0.5×, 1:1, 1.4× or 2×. |
I want to enlarge small fastenings, stitching or embellishments clearly; around 25% of shoppers prioritise magnification for fine details. |
| Will there be enough room for lighting? |
Check the working distance in front of the lens at the magnification you’ll use. The minimum focusing distance measured from the sensor isn’t the same as the clearance in front of the lens. |
I want to position lights around an accessory on a white background and control shadows or reflections; for around 25% of shoppers, having room to light the subject is their main concern. |
| Will the whole accessory be in focus? |
Consider whether one shot will be enough and, if necessary, plan a stable set-up for taking multiple shots at different focus points. |
I want a three-dimensional accessory to be sharp from front to back; around 19% of shoppers prioritise sharpness across the whole subject. |
Common buying mistakes
-
Assuming ‘Macro’ in the model name means 1:1
Maximum magnification varies from lens to lens. For example, the Canon RF 85mm F2 MACRO IS STM is rated at 0.5×, while other models reviewed here offer 1:1 or more.
Compare the maximum magnification of the exact version with the framing you need for your accessory.
-
Confusing the minimum focusing distance with the room available for lighting
The distance from the camera sensor to the subject isn’t the same as the clearance between the front of the lens and the accessory. This clearance varies by model and can affect how you position your lights.
Assess the working distance at the magnification you actually want to use, and try a test set-up on a white background.
If the lens gets in the way of lighting the accessory, you may need to change your lighting set-up.
-
Expecting higher magnification to make the whole product sharp automatically
Depth of field in macro photography can be too shallow to keep a three-dimensional accessory completely sharp in a single shot.
Stabilise the camera and subject, and check whether one shot is enough before choosing higher magnification as a solution.
Focus stacking requires extra shots and post-processing.
Lens brands to consider
Canon
Canon offers RF macro lenses with different maximum magnifications for EOS R cameras.
- Canon specifies 0.5× for the RF 85mm F2 MACRO IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM.
- The RF 85mm doesn’t offer 1:1; check whether 0.5× is enough for the smallest detail you want to photograph.
Nikon
The Z MC 50mm f/2.8 and Z MC 105mm f/2.8 VR S are both rated for 1:1 with Nikon Z cameras.
- The 50mm offers a standard focal length, while the 105mm has a longer focal length.
- Nikon gives around 5 cm of clearance in front of the 50mm lens at its minimum focusing distance. Check that this works with your lighting set-up.
Sony
The range for Sony E cameras includes a 90mm model with 1:1 magnification and a 100mm model with up to 1.4×.
- Sony gives a working distance of around 13 cm in front of the FE 90mm F2.8 Macro G OSS.
- The minimum focusing distance of 0.26 m specified by Sony for the FE 100mm F2.8 Macro GM OSS isn’t a measurement of the clearance in front of the lens.
Sigma
The 105mm F2.8 DG DN MACRO | Art is rated as a 1:1 option for Sony E and L-Mount.
- The manufacturer gives a maximum magnification ratio of 1:1.
- Check the mount of the version you’re buying; the specifications for this DG DN model don’t automatically apply to other camera systems.
Tamron
The 90mm F/2.8 Di III MACRO VXD is described as a 1:1 option for Sony E and Nikon Z.
- The manufacturer gives a maximum magnification ratio of 1:1 for model F072.
- Check that the product is model F072 and has the right mount; Tamron’s claims about sharpness are manufacturer claims.
Laowa
The 90mm f/2.8 2X Ultra-Macro APO version described here is designed for high magnification with Canon RF.
- According to the retailer, the Canon RF version offers 2:1 magnification and manual focus.
- At 2×, the retailer recommends using a tripod or macro rail. Check the mount of the exact version.
Related products
Related products will be available soon.
Frequently asked questions
Do I need a 1:1 macro lens for every costume accessory?
No. Choose the magnification based on the smallest detail you want to capture. For example, Canon specifies 0.5× for the RF 85mm and 1.4× for the RF 100mm. Lower magnification may be enough for a complete accessory, while a tiny detail may call for more.
Is the minimum focusing distance the gap between the lens and the accessory?
No. The minimum focusing distance is measured from the camera sensor. Sony gives a minimum focusing distance of 28 cm for the FE 90mm, with a working distance of around 13 cm in front of the lens.
How can you get an accessory on a white background sharp from front to back?
Set up the camera and subject securely, then check the focus in a test shot. If one shot doesn’t give you enough depth of field, you can take several images at different focus points and combine them using focus stacking.
What are my rights when buying a lens online in the Netherlands?
When you buy from a business online using distance selling, you’re generally entitled to a 14-day cooling-off period, although conditions and exceptions may apply. You also have statutory consumer rights if a product is faulty. According to the Dutch government, there is no fixed statutory warranty period of two years in the Netherlands; if a product is faulty, contact the retailer.