Detail checker
You want to photograph small labels, components or solder joints at a size that makes them easy to review later. Magnification, focusing and a stable setup all factor into your choice.
Start with your camera’s mount and the size of the detail you want to capture: greater magnification isn’t automatically useful for overview shots. Then compare the working distance—the clear space between the front of the lens and the circuit board—with the room you need for lighting. For components at different heights, a fixed setup and focus stacking can help; Nikon Netherlands explains how shots taken at different focus points can be combined.
You want to photograph small labels, components or solder joints at a size that makes them easy to review later. Magnification, focusing and a stable setup all factor into your choice.
You need to position your camera and lighting without taking up too much room around the circuit board. So compare the working distance with the space you have available.
You take both overview shots and close-ups, and want to set up your camera quickly. Maximum magnification won’t necessarily be your top priority.
First, check that the lens fits your camera mount. Then decide how large the smallest detail needs to appear in your photo, and whether there’ll be enough room around the lens for lighting.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Mount and camera | Check the exact lens mount and camera body. For example, Sigma offers the 105mm F2.8 DG DN MACRO | Art in Sony E and L-Mount versions; make sure you choose the one that fits your camera. | If you want to keep using your current camera, you’ll want to make sure the lens fits your body. Around 28% of consumers prioritise compatibility. |
| Smallest details | Compare the maximum magnification of the exact lens version with the smallest details you want to capture. Sony specifies 1.0× for the SEL90M28G, Canon specifies up to 1.4× for the RF 100mm F2.8L Macro IS USM, and Laowa specifies 2:1 for the APS-C 65mm f/2.8 2x Ultra Macro APO. | If small markings or components need to be legible, match the magnification to your subject rather than automatically choosing the highest setting. Around 22% of consumers prioritise detailed magnification. |
| Room for lighting | Compare the working distance measured from the front of the lens; this isn’t the same as the minimum focusing distance measured from the sensor plane. Sony lists a working distance of around 13 cm for the SEL90M28G. For the Z MC 50mm f/2.8, Nikon lists around 5 cm between the front of the lens and the subject at the closest focusing distance. | At a shared workbench, you’ll want to position the circuit board and lighting without the lens getting in the way. Around 22% of consumers prioritise having room around the lens. |
| Sharpness and setup | Check that you can position the camera steadily and that your workflow allows for shots taken at different focus points. Nikon Netherlands explains focus stacking as a way to combine these shots. | If components at different heights need to be in focus at the same time, it helps to plan how you’ll keep the camera and circuit board steady. Around 17% of consumers prioritise sharp, repeatable shots. |
| Overall setup and support | Allow for the support and lighting you’ll need, and check exactly what any additional warranty covers. Your statutory rights and an extra warranty aren’t the same thing. | If you want a practical setup without unnecessary extra costs, look beyond the lens itself. Around 11% of consumers focus mainly on the overall setup and support. |
Minimum focusing distance is measured from the sensor plane. So it doesn’t tell you how much room there’ll be in front of the lens for the circuit board or lighting.
Compare the working distance at the magnification you want to use, and check that your lighting setup will still fit.
Higher magnification gives you a smaller field of view. That can be less practical for showing the whole circuit board, while close-ups still need precise focusing.
First decide what the smallest detail you need to capture is, then compare magnification and field of view. If depth of field is limited, consider planning extra focus shots.
A fixed setup and extra shots for focus stacking take additional time to set up and process.
An extra warranty doesn’t replace your statutory rights if a product is faulty. According to the Dutch government, the retailer is your point of contact if there’s a problem with the product.
Before buying, read what additional cover is actually offered and how it adds to your statutory rights.
The FE 90mm F2.8 Macro G OSS is a Sony E option for anyone looking for a 1:1 macro lens.
The RF 100mm F2.8L Macro IS USM is an RF macro lens to consider if your Canon camera uses this mount.
The Nikon Z range includes the Z MC 50mm f/2.8 and the Z MC 105mm f/2.8 VR S. Choose based on your camera and the working space you need.
The 105mm F2.8 DG DN MACRO | Art is available for Sony E and L-Mount.
The 65mm f/2.8 2x Ultra Macro APO is an APS-C option for anyone looking for more than 1:1 magnification.
The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is a Micro Four Thirds option for anyone who needs high magnification.
No. At 1:1, the subject is reproduced at life size on the image sensor. Whether you need that magnification depends on the size of the detail and the crop you want; for an overview shot, lower magnification may be more practical.
Minimum focusing distance is measured from the sensor plane, while working distance is the space between the subject and the front of the lens. Use the working distance to check whether there’s room for a mount or lighting.
Keep the camera and circuit board steady. If one shot doesn’t give you enough depth of field, you can combine shots taken at different focus points into a focus stack. This requires extra shots and processing, as Nikon Netherlands explains.
No. Choose the magnification based on the smallest detail you want to capture. Higher magnification gives you a smaller field of view, so it won’t necessarily be the most practical choice if you also want to photograph the whole circuit board.