Who is this guide for?

Circuit board detail photographer

You want to capture small lettering and solder points clearly, and choose magnification based on the smallest relevant detail. Specifications from Canon, Nikon and Tamron provide examples of the magnification available from different macro lenses.

Home studio photographer with limited room for lighting

You need to position lighting beside or in front of the lens, so you compare the working distance with the dimensions of your setup. Nikon and Laowa provide examples of the space between the lens and subject for specific models and magnifications.

Photographer of tiny component details

You want to show a very small component larger than life-size and can spend time positioning it precisely by hand. For the 25mm f/2.8 2.5–5X Ultra Macro, Laowa specifies manual focusing and a specialist magnification range.

What should you consider when choosing?

What to consider What should you check? Who is this important for?
Clarity of detail Check the maximum magnification of the exact lens; distinguish between 1:1, 1.4× and specialist magnifications. If I want to capture small lettering or solder points clearly, I prioritise sufficient magnification; around 36% of consumers put small details first.
Room for lighting Check the working distance from the front of the lens at the magnification you want to use; don’t confuse it with the minimum focusing distance. If my lights need to be close to the circuit board, I want to know how much clearance the lens leaves; around 29% of consumers put room for lighting first.
Getting the whole circuit board in frame Check whether you can frame the circuit board at the distance you want. For a flat subject, assess the edges of the image too; if there are height differences, consider focus stacking. When I want to photograph the whole circuit board, I consider the framing and the depth of sharpness the subject requires; around 21% of consumers put an overall view first.
Extremely small details Check the magnification range, mount, focusing controls and working distance of the exact version. If I need to fill the frame with one tiny component, I’m happy to use a more specialist setup; around 14% of consumers put extreme detail magnification first.

Common pitfalls

  • Seeing ‘macro’ and not checking the magnification

    For a small component, 1:1 is different from a less powerful close-up. For an entire circuit board, the highest magnification isn’t always the most important factor.

    Start with the size of your subject, then compare the maximum magnification of the exact lens.

  • Confusing minimum focusing distance with working distance

    The distance between the front of the lens and the subject can be much shorter than the stated focusing distance. For the Z MC 50mm, Nikon gives around 5 cm of clearance in front of the lens at the shortest focusing distance.

    Measure your setup and check the working distance at the magnification you actually want to use.

    You may need to reposition your lights to illuminate the subject.

  • Choosing a lens by brand name, but not checking the mount

    Not every lens fits every camera, and some lens models are available in versions with different mounts.

    Before you buy, compare your camera’s full model reference with the lens mount and version.

  • Expecting higher magnification to keep the whole circuit board in focus

    At short shooting distances, depth of field is limited. Focus stacking combines several shots taken at different focus positions to show more of a stationary subject in focus.

    Choose the magnification for the detail you want, and if components are at different heights, plan a stable focus sequence if needed.

    A stable setup and combining images take extra time.

Relevant brands to consider

Canon

The RF 100mm F2.8L Macro IS USM is an option for a Canon camera with an RF mount.

  • Canon specifies a maximum magnification of 1.4× and a minimum focusing distance of 0.26 m for this model.
  • The minimum focusing distance doesn’t automatically tell you how much clearance there is in front of the lens. Check that your camera has an RF mount.

Nikon

Nikon offers a range of Z macro lenses with different focal lengths, including the MC 50mm and MC 105mm.

  • Nikon specifies 1:1 magnification for the NIKKOR Z MC 50mm f/2.8 and gives around 5 cm of clearance in front of the lens at the shortest focusing distance.
  • Check that the lens suits your exact camera and desired working distance; the MC 50mm and MC 105mm are separate lenses.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 macro option for Sony cameras with an E-mount, including full-frame and APS-C models, according to Sony.

  • Sony specifies built-in optical image stabilisation for this model.
  • Image stabilisation is no substitute for a tripod when taking a focus-stacking sequence.

Tamron

The 90mm F/2.8 Di III MACRO VXD F072 is a 1:1 option for compatible Sony E- or Nikon Z-mount cameras.

  • Tamron specifies flat-field correction for this model, which may be useful for a flat subject such as a circuit board.
  • Flat-field correction is a manufacturer claim, not an independent comparison. Check which mount version you need.

Laowa

The 25mm f/2.8 2.5–5X Ultra Macro is designed for very small details and is available, according to the manufacturer, for mounts including Canon RF, Nikon Z and Sony FE.

  • Laowa specifies manual focusing and a working distance of 40–45 mm within the stated magnification range.
  • Magnification starts at 2.5×, so this isn’t an obvious choice for wider shots of an entire circuit board.

Sigma

The 105mm F2.8 DG DN MACRO | Art is a 1:1 macro lens for Sony E- and L-Mount cameras.

  • Sigma specifies a minimum focusing distance of 29.5 cm for this model.
  • The compatibility with the TC-1411 and TC-2011 specified by Sigma applies to the L-Mount version, not automatically to Sony E.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Will any macro lens fit your camera?

No. Check the mount on your exact camera model and on the version of the lens you’ve chosen. Even versions of the same lens can have different mounts; check the compatibility of any adapter separately.

Is the minimum focusing distance the same as the space you need for your light?

No. The minimum focusing distance isn’t the same as the working distance from the front of the lens. For the Z MC 50mm, Nikon gives around 5 cm in front of the lens at the shortest focusing distance; for the 25mm, Laowa gives 40–45 mm within the 2.5–5× range. Check the distance at the magnification you want to use.

How can you get components at different heights in focus?

For a stationary subject, you can combine images taken with different focus positions. Canon describes focus stacking for this purpose and recommends using a sturdy tripod to align the sequence; check which bracketing features your camera offers.

What if the lens you bought online doesn’t suit your setup?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery, subject to exceptions and conditions that you should check before buying. This is separate from your rights if a product is faulty.

Is the manufacturer’s warranty your only right if a product is faulty?

No. ACM ConsuWijzer explains that, in addition to any manufacturer’s warranty, you have statutory rights if a product doesn’t do what you could reasonably expect when used normally. The retailer is responsible for this; there isn’t automatically one fixed warranty period for every lens.