Who is this guide for?

Circuit board documenter

You want to capture legible labels and components across a large area of a circuit board. Keeping the camera parallel to the board and having enough depth of field are important, as Adaptalux also explains.

Solder joint investigator

You want to fill the frame with a small track, contact or solder joint, so you’re comparing magnification and the space in front of the lens. Laowa and Nikon’s specifications offer examples of macro lenses for close-up photography.

Window-light photographer

You take photos without studio lighting and want to manage shadows and reflections before buying extra equipment. Omzlo describes using soft, diffused light for circuit board photography.

What should you consider when choosing?

1:1 macro lens for overviews and details

Suitable if: you want to photograph both circuit boards and individual components, and the lens mount is compatible with your camera.

Bear in mind: macro photography has a limited depth of field, so an angled shot can leave parts of the board out of focus.

2:1 macro lens for very small details

Suitable if: 1:1 magnification doesn’t give you enough of a close-up, and your camera and lens mount are compatible with the lens you choose.

Bear in mind: higher magnification reduces the visible area and makes focusing and lighting more important.

Adjust your setup first

Suitable if: shadows or blur are your main problem and you don’t need extra magnification.

Bear in mind: a better setup won’t magnify the image; your current lens may not be able to capture small components at a large enough scale.

What to consider What to look for Who should consider this?
Mount and sensor size Compare the full camera model name with the stated lens mount and supported sensor size. If I’m buying a lens for my existing camera, I first want to know that the mount and sensor size are compatible. Around 33% of consumers say compatibility is their top priority.
Legibility across the whole board Check whether you can fit the board into the frame from your available shooting distance; also check whether your camera supports focus stacking. If I want to capture a larger area of the board clearly, keeping the camera parallel to it and having enough depth of field are important. Around 27% of consumers prioritise an overview and legibility.
Magnifying small components Compare the maximum reproduction ratio and working distance; the minimum focusing distance is not the same as the clear space in front of the lens. If I need a small contact or solder joint to appear large in the frame, higher magnification may be useful. Around 20% of consumers put this first.
Shadows and reflections Consider whether you have room to soften the light and support the camera; don’t choose a lens based solely on its widest aperture. If I’m shooting by a window, I want to manage shadows and reflections in my shooting area. Around 20% of consumers prioritise controlling the light.

Common purchasing mistakes

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured differently from the gap between your subject and the front of the lens. That gap matters if you want to position a light near the board.

    Check both measurements to see how much room you’ll have in front of the lens.

  • Assuming a wider maximum aperture will solve out-of-focus components

    Macro photography has a limited depth of field. An angled camera position or components at different heights can therefore leave some areas out of focus.

    Position the camera as parallel as possible to a flat board. For components at different heights, consider taking several shots with different focus points.

  • Assuming an extended warranty is the same as your statutory rights

    An extended warranty is not the same as the legal protection you have if a product is faulty. The Dutch government explains that the seller must provide a solution when a product has a fault.

    Compare the terms of an extended warranty with your statutory rights before paying for one.

    A paid extended warranty may offer little extra if it doesn’t provide additional protection.

Brands to consider

Canon

The RF 100mm F2.8L Macro IS USM is a full-frame RF lens for cameras with a compatible mount.

  • Canon specifies magnification of up to 1.4×. According to Canon, the two-stop stabilisation claim applies at 1.0× magnification.
  • The RF mount does not fit cameras with a different mount directly.

Nikon

The NIKKOR Z MC 105mm f/2.8 VR S is a 1:1 macro option for Nikon Z cameras.

  • Nikon lists built-in vibration reduction and on-lens controls among the product specifications.
  • The Z mount determines which cameras the lens is directly compatible with. These specifications are not the result of an independent PCB test.

Sigma

The 105mm F2.8 DG DN MACRO | Art is a 1:1 lens, available in separate versions for Sony E and L-Mount.

  • Sigma specifies a minimum focusing distance of 29,5 cm.
  • Check which mount is compatible with your camera. The manufacturer’s claims about optical quality are not based on an independent circuit board test.

Laowa

The 65mm f/2.8 2X Ultra Macro APO is designed for compatible APS-C cameras and very small details.

  • Laowa specifies magnification of up to 2:1 and a minimum focusing distance of 17 cm.
  • Check the mount you choose. Higher magnification isn’t automatically the most practical choice for an overview of the whole board.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need 2:1 magnification to photograph a whole circuit board?

No. 2:1 magnification is mainly for very small details, not for an overview of the whole board. Laowa specifies this magnification for the 65mm f/2.8 2X Ultra Macro APO; for an overview, keep the camera as parallel to the board as possible.

How do I focus on protruding components?

Set up your camera securely and consider taking several shots with different focus points. Nikon says focus stacking can increase the depth that appears in focus; check what your camera can do.

How can I use window light without harsh shadows?

Soften strong, direct light and check for shadows again after moving the board or camera. Omzlo describes soft, diffused light as an approach to circuit board photography; the article doesn’t test any specific macro lens by a window.

What can I do if a lens I bought online doesn’t work properly?

For a consumer purchase in the Netherlands, the seller must provide a product that meets the required standard and offer a solution if it has a fault, according to the Dutch government. For distance purchases, you also have a 14-day cooling-off period in many cases; check the relevant terms and exceptions.