Who is this choice for?

Circuit board documenter

You want to capture both the whole circuit board and recognisable details consistently and sharply for your portfolio. Start by deciding on your preferred framing, and consider using a stable setup.

Micro-detail photographer

You mainly want to photograph very small components or structures so they fill the frame, and you’re prepared to focus carefully and adjust the lighting.

Photographer with an existing camera body

You want to add a macro lens without buying the wrong mount or version. Compatibility with your camera determines which of the models mentioned are suitable.

What should you look for in a macro lens?

First, choose the magnification you need to show the detail you have in mind. Then check the mount, and consider focusing, lighting and the space around your circuit board.

Close-up, up to 0.5×

Suitable if: you mainly want to show the circuit board as a whole, along with its surrounding design, using a compatible Canon RF camera.

Trade-off: Canon specifies a maximum magnification of 0.5× for the RF 35mm, so small components will appear less enlarged than with a 1:1 lens.

1:1 macro

Suitable if: you want to highlight components or connections without going straight to extreme magnification.

Trade-off: according to their manufacturers, the Nikon Z, Sony E and Sigma versions mentioned offer 1:1 magnification, but they don’t share the same mount. Accurate focusing remains important.

More than 1:1

Suitable if: tiny solder joints or material structures are your main subject, and you have a compatible Canon RF camera.

Trade-off: Canon specifies a maximum magnification of 1.4× for the RF 100mm. The Laowa RF version mentioned reaches 2:1, but is fully manual and, according to Laowa, does not communicate electronically with the camera.

What to consider What should you look for? Who is this important for?
Capturing the whole circuit board in focus Check your preferred framing, the space available for the camera and lighting, and whether your workflow supports focus stacking. Canon recommends using a tripod for consistent framing; Nikon describes focus stacking as a way to increase the depth of field in an image. If I want to capture my circuit board as a whole for a portfolio, I need clear framing and enough sharpness across the relevant subject. Around 33% of consumers would prioritise an overall view and sharpness.
Magnifying small components Compare the maximum magnification of the exact version. Nikon, Sony and Sigma specify 1:1 for the models mentioned; Canon specifies a maximum of 1.4× for the RF 100mm, and Laowa specifies 2:1 for the RF version. If I want small components to fill the frame, I need to know how much magnification I need and whether I can focus accurately. Around 25% of consumers would make magnification of micro-details their main consideration.
Camera compatibility Check your camera model, mount and full version name. Sigma lists separate Sony E and L-Mount versions; the Laowa version mentioned has a Canon RF mount. If I want to keep using my current camera, I don’t want to choose a lens with an incompatible mount. Around 25% of consumers would prioritise compatibility with their existing camera.
Managing light and reflections Consider the direction of the light and the space in front of the lens at your chosen magnification. Nikon notes that a polarising filter can reduce unwanted reflections in some situations; try a test shot with your own circuit board first. If reflections are obscuring details on my circuit board, I want to be able to adjust the lighting without immediately needing extra accessories. Around 17% of consumers would consider light and reflections their main concern.

Common buying mistakes

  • Assuming ‘macro’ means one fixed magnification

    The Canon RF 35mm mentioned reaches a maximum of 0.5×, while the 1:1 lenses, Canon RF 100mm and Laowa RF 100mm mentioned have different maximum magnifications. The name alone doesn’t tell you how large a detail will appear on the sensor.

    Compare the maximum magnification of the exact version with the smallest component you want to capture so that it fills the frame.

  • Choosing based only on focal length or brand name

    The lenses mentioned have different mounts. Sigma offers separate Sony E and L-Mount versions of this model; the Laowa version mentioned is for Canon RF. Choosing the wrong version could mean buying another lens or arranging a return.

    Before buying, check the full model name, the mount and compatibility with your camera body.

  • Assuming more magnification can replace a good setup

    Close-up photography requires precise focusing. A tripod can help you keep your framing consistent; focus stacking combines multiple shots and requires processing afterwards.

    Start with a stationary circuit board, a stable camera and controlled lighting. Then decide how much magnification you actually need.

    If you use focus stacking, allow for taking and processing multiple shots.

Relevant brands to consider

Canon

The RF models mentioned range from a close-up lens with magnification up to 1:2 to a macro lens that goes beyond 1:1. These specifications apply to the individual models.

  • Canon specifies a maximum magnification of 1.4× and autofocus for the RF 100mm.
  • The RF 35mm reaches a maximum of 0.5×; also check the working distance and the space available for your lighting.

Nikon

The NIKKOR Z MC 105mm f/2.8 VR S mentioned is a 1:1 lens for compatible Nikon Z cameras.

  • Nikon specifies 1:1 magnification and vibration reduction for this model.
  • Depth of field remains a separate consideration when setting up a static portfolio shot.

Sony

The FE 90mm F2.8 Macro G OSS (SEL90M28G) is a 1:1 lens with a Sony E mount.

  • Sony specifies a minimum focusing distance of 0.28 m and optical image stabilisation for this model.
  • The minimum focusing distance is not the same as the clear space between the front of the lens and the circuit board.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available in separate versions for Sony E and L-Mount.

  • Sigma specifies 1:1 magnification and a minimum focusing distance of 29.5 cm for this model.
  • When buying, check which mount fits your camera; the versions are not interchangeable.

Laowa

The 100mm f/2.8 2X Ultra-Macro APO mentioned is the version with a Canon RF mount.

  • Laowa specifies 2:1 magnification for this version, making it suitable for photographing very small details.
  • The lens is fully manual and, according to Laowa, does not communicate electronically with the camera.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need 1:1 magnification to photograph a whole circuit board?

Not necessarily: lower magnification may be enough for an overall shot, as long as the framing suits the dimensions of your circuit board. At 1:1, the subject is reproduced at life size on the sensor, so choose the magnification you need based on the detail you want to show.

How can I get components at different heights in focus at the same time?

Set up your camera securely and first check whether a single shot gives you enough depth of field. Nikon describes focus stacking as combining shots taken at different focus points; check that this approach suits your camera’s capabilities and your editing workflow.

How should I care for my lens after taking photos?

Sony recommends removing loose dust first with a blower, then carefully using a suitable cloth if needed. Sony advises against applying cleaning fluid directly to the lens; also follow the instructions for your own lens.

What are my rights when buying online in the Netherlands?

For online consumer purchases from a business, you generally have a 14-day cooling-off period, although exceptions may apply depending on the circumstances. The Dutch government states that there is no fixed statutory guarantee period: you are entitled to a product that meets what you could reasonably expect, and the seller is your point of contact if a product is faulty.