Start with the framing you want, then check the maximum magnification, the clearance in front of the lens and your camera’s mount. A 1:1 lens is a useful benchmark for small components. Higher magnification may suit tiny details, but it won’t solve limited depth of field or leave more room for lighting.
Who is this buying guide for?
Circuit board documenter
Wants to capture the placement and details of components, and decide whether a wider view or a close-up is more suitable. The magnification figures published by Nikon Netherlands, Sony Netherlands and Sigma provide useful points of comparison.
Home studio photographer dealing with reflections
Needs room to position lighting around shiny or raised components. Basler describes diffuse lighting for shiny or uneven surfaces, including circuit boards.
Photographer capturing tiny details
Wants to make a very small component appear larger in the frame, while allowing for precise focusing and suitable lighting. Canon and Laowa offer models with magnification greater than 1:1.
What should you look for?
First decide how you want to frame your shot, then consider the space available for lighting and check the exact mount and controls before you buy.
| What to consider |
What to look for |
Who will find this most important? |
| Detail at your chosen framing |
Decide whether you want to capture an entire board, a group of components or a single small detail. Compare maximum magnification, but bear in mind that this alone won’t tell you whether the whole board will fit in one shot. |
If I want to document components, the magnification needs to suit the framing I need. Around 33% of consumers put having enough detail at their chosen framing first. |
| Working space and reflections |
Compare the working distance at your desired magnification and check whether there’s room for a diffuser. The minimum focusing distance is measured from the sensor, not from the front of the lens. |
When photographing shiny components, I want to position the light without the lens getting in the way of my setup. Around 27% of consumers prioritise space for lighting and manageable reflections. |
| Very small or raised details |
Choose magnification greater than 1:1 only if your desired framing calls for it. Where components vary in height, focus stacking can combine several shots taken at different focus points. |
If a tiny component needs to fill the frame, higher magnification may be useful; for components at different heights, the focusing method also matters. Around 20% of consumers prioritise capturing these kinds of details. |
| Mount and features you need |
Check the exact mount, model version and aperture controls for your camera body. Also decide what magnification and accessories you actually need before comparing the total cost of your purchase. |
I want a lens that fits my camera, without paying for features or magnification that my shots don’t need. Around 20% of consumers start by considering a suitable upgrade and its associated costs. |
Common pitfalls
-
Confusing minimum focusing distance with the clearance in front of the lens
The stated minimum focusing distance is measured from the sensor plane. There’s less room to position a diffuser in front of the lens.
Compare the working distance at the magnification you plan to use and check that your lighting will fit.
You may need to change your lighting setup.
-
Assuming every version has the same mount and controls
According to Sigma, the 105mm is available in separate versions for Sony E and L-Mount. Laowa describes a difference in aperture control between the Canon EF version and the other versions.
Check the full model name, mount, camera body and controls of the version you want to buy.
The wrong mount could mean you need to exchange or replace the lens.
-
Choosing higher magnification to fix reflections or limited depth of field
Magnification, lighting and depth of field are separate considerations. A higher maximum magnification won’t automatically give you more room for lighting or greater depth of field.
If you’re dealing with reflections, try diffuse light first. Where components vary in height, consider whether a series of shots taken at different focus points and focus stacking will suit your camera and workflow.
Brands to compare
Canon
The RF 100mm F2.8L Macro IS USM is worth comparing if you have a compatible RF camera and are considering magnification greater than 1:1.
- Canon specifies a maximum magnification of 1.4× and a minimum focusing distance of 0.26 m.
- That focusing distance doesn’t tell you how much clearance there is in front of the lens. Check compatibility with your camera body and whether you need the extra magnification.
Nikon
The NIKKOR Z MC 105mm f/2.8 VR S is a 1:1 option for a compatible Nikon Z camera.
- Nikon Netherlands lists a 1:1 reproduction ratio and manual focusing as a control option.
- Check the Z mount and make sure there’s room for your lighting. Nikon’s claims about sharpness and stability are manufacturer claims, not an independent comparison.
Sony
The FE 90 mm F2.8 Macro G OSS is a 1:1 option for a compatible Sony E camera.
- Sony Netherlands lists a minimum focusing distance of 0.28 m and a working distance of around 13 cm for this model.
- Check whether the working distance leaves enough room for your lights or diffuser.
Sigma
The 105mm F2.8 DG DN MACRO | Art is a 1:1 option available in separate versions for Sony E and L-Mount.
- Sigma lists a maximum magnification ratio of 1:1 and a minimum focusing distance of 29.5 cm.
- The stated focusing distance is not the same as the working distance. Choose the right mount; Sigma’s claims about optical performance are not an independent comparison.
Laowa
The 100mm f/2.8 2x Ultra Macro APO is worth comparing if you want to shoot at up to 2:1 with a compatible version.
- Laowa specifies a maximum magnification of 2:1.
- According to Laowa, only the Canon EF version has electronic aperture control via the camera; the other versions listed are operated manually. Check the exact mount and controls.
Products on Joybuy
Related products coming soon.
Frequently asked questions
Do you need 1:1 for every circuit board photo?
No. First decide how much of the circuit board you want in the shot. A 1:1 ratio describes the size of the subject’s image on the sensor. Lower magnification may be suitable for a wider view, while a very small detail may call for higher magnification.
How can you make shiny and raised components easier to see?
Try diffuse, even lighting and check how much space there is between the lens and the circuit board. For components at different heights, you can combine shots taken at different focus points, if your camera and workflow allow it.
What additional costs and warranty rights should you check?
Ask about additional costs before you buy and check whether your setup needs any accessories. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; however, when you buy as a consumer, you’re entitled to a product that meets expectations. An additional warranty doesn’t replace your statutory rights.
Do you have 14 days to change your mind when buying a lens online?
According to the Dutch government, when you buy remotely from a business, you’re often entitled to a 14-day cooling-off period. Check who the seller is and which terms and conditions apply to your order.