Who is this choice relevant to?

Anyone documenting circuit boards

You may want to capture the whole circuit board against a white background regularly, while also being able to show close-up details. Check that the mount fits and that the lens gives you the framing and working space you need for a fixed setup. Nikon and Canon describe using a tripod as a way to achieve consistent framing.

Anyone inspecting components

If small markings or solder joints need to fill the frame, compare magnification, sharpness across components at different heights, and room for lighting. Nikon explains the limited depth of field in macro photography, while Sony specifies a working distance for its 90mm lens.

Anyone working with a small photography table

If space is limited for your camera, circuit board and lighting, compare the working distance at your chosen magnification with the room you have available. Nikon and Sony give distances for specific lenses that show why minimum focus distance and the space in front of the lens are not the same thing.

What should you look for when buying?

First, check the camera mount. Then work out how small the key detail is, and whether you’ll still have enough room for lighting and a stable setup.

What to consider What to look for Who should prioritise this?
Compatible camera mount Check your camera model and the mount of the exact lens version. If I’m choosing a lens for my camera, I want to be sure the mount matches. Around 31% of consumers put compatibility first.
Magnification for small details Compare the maximum magnification ratio of the exact version with the smallest detail you want to show. If I want tiny markings or solder joints to appear large in the frame, I look at the maximum magnification. Around 25% of consumers prioritise magnifying details.
Room for lighting Compare the distance from the front of the lens to the subject at your chosen magnification. Minimum focus distance is not measured from the front of the lens. With a small photography table, I want enough room to position a light beside the lens. Around 25% of consumers put working space for the camera and lighting first.
Sharp, consistent shots Assess the stability of your camera setup and the lighting. Consider focus stacking for components at different heights. If I want to capture the whole circuit board sharply against a white background, consistently, I also consider the setup and sharpness across different heights. Around 19% of consumers prioritise consistent overview shots.

Pitfalls of macro photography

  • Confusing minimum focus distance with working distance

    Minimum focus distance is measured from the sensor, so it doesn’t tell you how much free space there is in front of the lens. For the Z MC 50mm f/2.8 at maximum magnification, Nikon gives a distance of around 5 cm between the front of the lens and the subject.

    Check the working distance at the magnification you actually plan to use, and compare it with the space available for your lighting.

    A short working distance may mean you need to position your lighting differently.

  • Assuming every lens labelled ‘macro’ reaches 1:1

    The maximum magnification ratio varies by model. Canon specifies a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM. That’s different from 1:1 or a higher magnification.

    Compare the maximum magnification ratio of the exact version with the smallest detail you want to photograph.

  • Choosing higher magnification to fix shadows or blur

    Higher magnification won’t automatically solve lighting problems or limited depth of field. In macro photography, components at different heights can fall outside the area in focus.

    Test the framing, lighting and focus across the height of the circuit board separately before opting for higher magnification.

    A fixed setup and focus stacking can require extra preparation and shooting time.

Relevant brands to consider

Nikon

The NIKKOR Z MC 50mm f/2.8 is a 1:1 macro option for a compatible Nikon Z camera.

  • Nikon gives a distance of around 5 cm between the front of the lens and the subject at maximum magnification.
  • At this short working distance, there may be little room to position a light beside the lens.

Sony

The FE 90mm F2.8 Macro G OSS is a 1:1 option for a compatible Sony E camera.

  • Sony specifies a working distance of around 13 cm for this model.
  • The stated minimum focus distance of 0.28 m is not the same as the working distance measured from the front of the lens.

Canon

For compatible RF cameras, Canon offers, among other options, an RF 35mm version with a maximum magnification of 1:2 and an RF 100mm version with magnification of up to 1.4×.

  • The RF 100mm F2.8L Macro IS USM is an option if you need magnification greater than 1:1.
  • The RF 35mm doesn’t reach 1:1. Also check the mount of the exact lens and camera.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available with Sony E and L mounts and offers 1:1 magnification.

  • The two mounts mentioned make this model relevant to specific camera systems.
  • Sigma gives a minimum focus distance of 29.5 cm. This is not the distance from the front of the lens.

Laowa

The 100mm f/2.8 2X Ultra Macro APO is a specialist option if you need more than 1:1 magnification.

  • Laowa specifies 2:1 magnification for this model.
  • According to Laowa, aperture control varies by mount: only the specified Canon EF version has a chip and motor for control via the camera; the other versions listed are manual.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do I need 1:1 magnification to photograph a whole circuit board?

No, not if you can frame the whole circuit board as you want at a lower magnification. First, decide which smallest detail needs to be visible on its own. Canon specifies a maximum of 1:2 for the RF 35mm F1.8 MACRO IS STM.

Why is a raised component out of focus when the rest of the circuit board is sharp?

Depth of field can be very shallow in close-up photography. Set up your camera securely and, for components at different heights, consider taking several shots with the focus shifted between them and combining them with focus stacking.

Does a white background automatically prevent shadows in a product photo?

No, a white background alone doesn’t determine how the circuit board is lit. Assess the lighting separately, and use a stable camera setup if you want to keep the framing consistent. Canon describes a tripod as a useful aid for product photos with fixed framing.

What warranty and cooling-off period apply to online purchases in the Netherlands?

According to the Dutch government, there is no fixed statutory warranty period in the Netherlands. However, products bought by consumers must comply with the agreement. For distance purchases, a 14-day cooling-off period applies in many cases, although exceptions and the buyer’s status may be relevant. For a specific order, check who the seller is and which terms apply. Consumer protection rules do not necessarily apply to business purchases.