First, choose a lens with the right mount, then decide whether you mainly want to fill the frame with the whole button or a small mark. Next, compare the magnification with the space in front of the lens for lighting and your setup. If you need the relief to be sharp from front to back, a stable setup with several focus-shifted shots may be more relevant than simply choosing a higher maximum magnification.
Who is this lens choice relevant to?
Looking for fine details
Wants to capture tiny lettering, stamps or surface details on a single button at a large size, so compares the reproduction ratios of lenses that fit their camera. Nikon, Canon and Sony specify magnification ratios for the macro models mentioned here.
Photographing whole buttons
Wants to capture a whole button, including its material and shape, on a small table. Framing, available setup space and the distance between the lens and subject all play a part; Nikon and OM SYSTEM list a 1:1 ratio for the models mentioned here.
Documenting relief
Wants to capture raised and recessed details sharply and may use a stable setup and several focus-shifted shots to do so. Nikon and Canon describe focus stacking as a way to combine images taken with different focus points.
What should you look for in a macro lens?
Compact macro lens, around 50–60 mm
Ideal for: anyone who wants to photograph whole buttons as well as small details, and can position the camera close to the table.
Keep in mind: for the Nikon Z MC 50mm, Nikon specifies approximately 5 cm of space in front of the lens at the closest focusing distance. This may limit where you can position your lighting. Nikon Z and Micro Four Thirds lenses also use different mounts.
Macro lens, around 90–105 mm
Ideal for: anyone who wants to explore a setup with more room around the button and has a compatible Sony E or L mount.
Keep in mind: a longer focal length may call for a different camera setup to achieve the same framing. The minimum focusing distance alone does not tell you how much free space there is in front of the lens.
More than 1:1 for small details
Ideal for: anyone who wants to make a mark or surface detail appear larger in the frame than it would at 1:1, and uses a compatible Canon RF camera.
Keep in mind: Canon specifies a maximum magnification of 1.4× for the RF 100mm. With a button featuring relief, the limited depth of field may mean you also need to plan for a stable setup and several focus-shifted shots.
| Consideration |
What to look for |
Who is this important for? |
| Small marks |
Compare the maximum reproduction ratio of the exact lens model on the sensor, and decide how large you want the detail to appear in the frame. |
If I want a small stamp to fill the frame, I prioritise magnification over the whole button; consumers whose main priority is magnifying details make up around 31% of consumers with this buying need. |
| Space for the camera and lighting |
Check the distance in front of the lens at the magnification you want; don’t confuse it with the focusing distance measured from the sensor plane. |
On a small table, I want to leave room for the camera and lighting around the button; consumers whose main priority is setup space make up around 25% of consumers with this buying need. |
| Sharpness across the relief |
Check whether the camera and lens support focus bracketing, or allow for manual shots and compositing. |
If I want to document raised and recessed details sharply from front to back, I also consider a stable workflow; consumers whose main priority is depth of field make up around 25% of consumers with this buying need. |
| Mount and version |
Note your camera model, check the exact lens mount and version, and see what’s included with the lens. |
To avoid buying a lens that doesn’t fit my camera, I check the mount before comparing models; consumers whose main priority is compatibility make up around 19% of consumers with this buying need. |
Common pitfalls
-
Confusing ‘2× equivalent’ with 2:1 on the sensor
OM SYSTEM also gives the M.Zuiko 60mm a magnification of 2× in 35mm-equivalent terms. The manual lists 1:1 on the sensor; these figures are not directly equivalent.
Compare reproduction ratios on the same basis before choosing a lens for small details.
-
Confusing minimum focusing distance with working space in front of the lens
For the Nikon Z MC 50mm, Nikon specifies both a minimum focusing distance of 0.16 m and approximately 5 cm between the front of the lens and the subject at that distance. So the first figure alone doesn’t tell you how much room you’ll have for lighting.
Check the free space in front of the exact lens at the magnification you want to use.
-
Assuming higher maximum magnification guarantees a fully sharp photo of relief
With close-ups, only a small part of a button with relief may be in focus at a time. Focus stacking combines shots taken with different focus points; Nikon and Canon also highlight the importance of a stable setup.
Choose the magnification based on your desired framing, and plan separately for sharpness across the relief.
Focus stacking can take extra time for a stable setup, taking several shots and combining them.
Relevant lens brands to consider
Nikon
For Nikon Z cameras, Nikon describes the Z MC 50mm as a 1:1 macro lens that can also be used for wider everyday shots.
- Nikon specifies approximately 5 cm between the front of the lens and the subject at the closest focusing distance.
- Check whether this working distance leaves enough room for lighting on your table; this measurement applies to this model, not all Nikon macro lenses.
Canon
For compatible Canon RF cameras, Canon specifies a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM.
- The extra maximum magnification may be useful if a small mark still doesn’t appear large enough in the frame at 1:1.
- Canon lists a minimum focusing distance of 0.26 m; this is not the same as the free space in front of the lens. The specification doesn’t prove that a whole button will be captured better.
Sony
The Sony FE 90mm F2.8 Macro G OSS, model SEL90M28G, is designed for Sony E cameras; Sony specifies a ratio of up to 1:1.
- Sony lists optical stabilisation and a minimum focusing distance of 0.28 m.
- Check your preferred working distance and tabletop setup separately; the specifications given don’t demonstrate an advantage when shooting from a stable tripod.
OM SYSTEM
The M.Zuiko Digital ED 60mm F2.8 Macro is for Micro Four Thirds cameras. The manual lists 1:1 on the sensor.
- The manual gives a minimum focusing distance of 0.19 m.
- OM SYSTEM also lists ‘2×’ as a 35mm equivalent; don’t read this as a reproduction ratio of 2:1 on the sensor.
Sigma
The Sigma 105mm F2.8 DG DN MACRO | Art is available for Sony E and L mounts.
- Sigma specifies a minimum focusing distance of 29,5 cm.
- Check the exact mount and the working space for your chosen framing; the manufacturer’s claims about optical performance are not an independent comparison.
Related products
Related products coming soon.
Frequently asked questions
Do I need 1:1 for every photo of an antique button?
No, it depends on the framing you want. First decide whether you want to capture the whole button or just a small mark; 1:1 is the maximum reproduction ratio of the lens models mentioned, not a requirement for every photo.
How can I capture a button’s relief more sharply?
Set the button and camera up securely, and, if needed, take shots at different focus points to combine later. Check that focus bracketing works with your exact camera and lens; this hasn’t been confirmed for every combination.
What if a lens I bought online doesn’t fit my camera?
Check the mount before you buy. According to ACM ConsuWijzer, online consumer purchases in the Netherlands generally come with a statutory 14-day cooling-off period after delivery, subject to exceptions and conditions; check the relevant returns information. If a product is faulty, your statutory rights against the seller also apply.