Who is this choice relevant to?

Button collector

You want to capture whole buttons and clear details of their material or wear. The framing you need will depend in part on the size of the button and your camera sensor. Nikon Netherlands offers practical guidance on macro photography of small subjects.

Detail photographer

You want to magnify tiny engravings, holes or textures, and are happy to focus with greater precision. Canon Netherlands explains focus stacking for shots where a single image doesn’t provide enough depth of field.

Window-light photographer

You work with still objects and natural indoor light, balancing exposure, reflections and depth of field. Nikon Netherlands discusses what to consider when shooting indoors and keeping your camera steady.

What should you look for when choosing?

First, check that the lens mount is compatible with your camera. Then decide how much magnification you need and whether you’ll have enough room for window light and a stable setup when framing your shot.

What to consider What to check before buying Who should pay extra attention?
Compatible lens mount Compare the mount on the exact lens version with your camera model, and check the sensor size too. When I choose a lens, it needs to fit my camera before magnification becomes relevant. Around 31% of consumers put compatibility first.
Magnification for your framing Compare the maximum magnification: 0.5×, 1:1 or higher, depending on how large you want details to appear. If I want engravings, holes or wear to appear large in the frame, maximum magnification matters more than the word ‘macro’ alone. Around 25% of consumers give detail magnification their top priority.
Sharpness in window light Consider a stable setup and check whether you can achieve enough depth of field; stabilisation does not increase depth of field. If I want to capture a button’s relief sharply in available window light, I consider both focus and exposure. Around 25% of consumers prioritise this combination.
Space in front of the lens Check the working distance at the magnification you plan to use; minimum focusing distance is not the same as the clear space in front of the lens. When I set up a button by a window, I want enough room for the camera and incoming light. Around 19% of consumers put this working distance first.

Common buying mistakes

  • Assuming ‘macro’ means 1:1

    A close-up lens may offer a maximum magnification of 0.5×. This makes small button details appear less large than they would with a lens capable of 1:1.

    Compare the stated maximum magnification with the framing you want, rather than relying on the product name alone.

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance is measured from the sensor plane. The space between your subject and the front of the lens may be shorter, which can affect where you position your setup by the window.

    Check the working distance at the magnification you plan to use and make sure your setup leaves enough room.

  • Expecting image stabilisation to solve blur across a button’s relief

    Stabilisation helps reduce camera shake, but it won’t solve the shallow depth of field you get when shooting close up. Its effectiveness may also depend on the magnification.

    Decide how much of the button needs to be sharp. Consider a stable setup and, if one shot isn’t enough, focus stacking.

  • Assuming all lens mounts are interchangeable

    A lens model may be available in different versions. For example, the Sigma 105mm F2.8 DG DN Macro Art is sold separately with a Sony E or L mount.

    Check the exact version against your camera’s mount before ordering.

Brands and relevant macro ranges

These examples show how magnification, mount and working distance vary between models. Always check that the version listed is compatible with your camera system.

Canon

RF close-up and macro lenses for compatible EOS R cameras, including models with maximum magnifications of 0.5× and 1.4×.

  • Canon states that the RF 100mm F2.8L Macro IS USM offers up to 1.4× magnification, while the RF 85mm F2 Macro IS STM offers up to 0.5×.
  • The RF 85mm does not offer 1:1 magnification. For the RF 100mm at 1.0×, Canon specifies 2 stops of optical stabilisation, below its general maximum rating.

Nikon

NIKKOR Z MC macro lenses, including the 50mm f/2.8 and 105mm f/2.8 VR S, both rated for a maximum magnification of 1:1.

  • The MC 105mm has built-in vibration reduction.
  • For the 50mm in the close-up setup described, Nikon gives approximately 5 cm of space in front of the lens. Check whether this working distance blocks incoming light; stabilisation is no substitute for choosing an adequate depth of field.

Sony

FE macro lenses for the E-mount, including the FE 90mm F2.8 Macro G OSS and FE 100mm F2.8 Macro GM OSS.

  • Sony specifies a maximum magnification of 1.0× for the FE 90mm and 1.4× for the FE 100mm Macro GM OSS; both models listed have optical stabilisation.
  • The maximum magnification of 1.4× applies to the FE 100mm Macro GM OSS, not the FE 90mm or the differently named FE 100mm STF.

Sigma

The 105mm F2.8 DG DN Macro Art offers 1:1 magnification for mirrorless cameras and is available with a Sony E or L mount.

  • For the Sony E version, Sigma specifies a weight of 710 g and a minimum focusing distance of 29.5 cm.
  • According to Sigma, the L-mount version weighs 715 g. Check the mount; these specifications do not automatically apply to other Sigma lenses.

OM System

The M.Zuiko Digital ED 60mm F2.8 Macro offers 1:1 magnification for Micro Four Thirds.

  • OM System specifies a weight of 185 g and a minimum focusing distance of 0.19 m.
  • Minimum focusing distance is not the working distance in front of the lens. This model is for Micro Four Thirds, not the other mounts mentioned.

Joybuy products

Related products coming soon.

Frequently asked questions

Is 0.5× enough for an antique button?

It depends on the size of the button, your sensor and the framing you want. At 0.5×, the subject appears at most half as large on the sensor as it would at 1:1. Choose 1:1 or higher if you want very small details to appear large in the frame.

How can I get more of the relief in focus without another light?

Keep the button and camera steady, check test shots and try a smaller aperture if the exposure allows. If a single shot doesn’t give you enough depth of field, you can stack images taken at different focus points when photographing a still subject. This requires a suitable shooting and post-processing workflow. Canon Netherlands describes this technique as focus stacking.

What should I consider when photographing a button by a window?

Check whether the lens and camera block the light, how reflections look and whether other indoor lights affect colour rendition. For indoor lighting, Nikon Netherlands also recommends considering possible differences in colour temperature; a reflector can help you direct the available light.

What are my rights when buying a lens online in the Netherlands?

According to the Dutch government, distance purchases usually come with a 14-day cooling-off period; check whether the purchase and any exceptions fall under this rule. Products must also conform to the contract. The Dutch government states that the Netherlands has no fixed statutory warranty period of two years; if there’s a fault, contact the seller.