Who is this buying guide for?

Maker with an existing mirrorless camera

You want to photograph buttons for a portfolio without choosing a lens with the wrong mount. Start with your camera model, then compare only versions that are compatible with it.

Photographer capturing button details

You might want to capture relief, holes or decoration at a larger scale, weighing up your preferred framing against magnification, composition and depth of field.

Maker with a small tabletop setup

You want to create portfolio photos consistently, so you’re considering the space available for lighting and a setup that can capture details sharply across the depth of a button.

What should you look for when buying?

Compact close-up

Suitable for: photos of whole buttons and a compact setup, as long as the lens mount matches your camera.

Keep in mind: the Canon RF 35mm F1.8 MACRO IS STM offers up to 0.5× magnification; Fujifilm lists 1:1 for the XF30mmF2.8 R LM WR Macro. The Fujifilm lens’s 10 cm minimum focusing distance is measured from the sensor plane, not from the front of the lens.

Macro around 90–105 mm

Suitable for: anyone who wants to frame small details and factor in the space needed for their setup when choosing a lens.

Keep in mind: Sony lists a working distance of around 13 cm for the FE 90mm F2.8 Macro G OSS. This applies to this model; for other lenses, check the working distance at your desired magnification and choose the right mount.

Extra-high magnification

Suitable for: anyone who wants to photograph tiny engravings or material textures with a compatible camera and lens.

Keep in mind: OM lists a maximum of 4× in 35 mm equivalent terms for the M.Zuiko Digital ED 90mm F3.5 Macro IS PRO. This figure is not directly comparable with Canon’s maximum of 1.4× for the RF 100mm F2.8L Macro IS USM.

Consideration What should you check? Who is this important to?
Compatibility Make a note of your camera model and mount. Check that the exact lens version is designed for it. If I want to keep using my existing camera, I check the mount before comparing magnification. Around 28% of consumers put camera compatibility first.
Magnification Decide whether you want to fill the frame with the whole button or a small detail. Compare the maximum magnification of the exact model. If you mainly want to show relief or decoration, consider the framing the lens allows. Around 22% of consumers prioritise the level of detail they want to capture.
Working space Look up the working distance at your desired magnification, and distinguish it from the minimum focusing distance measured from the sensor plane. If I want to position lights around a button, the clear space in front of the lens matters to me. Around 22% of consumers make working space for the camera and lighting their main consideration.
Sharpness across the button Take test shots using different focus points. Check whether your setup allows you to capture a stable sequence for possible focus stacking. If you want a domed button to be sharp from front to back, consider focusing and post-processing too. Around 17% of consumers prioritise a controlled focusing method.
Cost and versatility Match the magnification to your preferred framing and compare only lenses that fit your camera. If I mainly photograph whole buttons, I want to avoid choosing a level of magnification I don’t need. Around 11% of consumers weigh the purchase price against versatility above all else.

Common buying mistakes

  • Assuming a high ranking means a lens is compatible

    A lens may be a good fit for a particular use but still not fit your camera. Techboer describes its ranking as catalogue research, not a hands-on test. The order of the list doesn’t tell you which mount you need.

    First check your camera model and the full mount specification for the lens version. Use a ranking only as a starting point for comparing options that suit your camera.

  • Assuming every macro lens offers the same magnification

    The word ‘macro’ doesn’t indicate a fixed maximum magnification. Canon lists up to 0.5× for the RF 35mm F1.8 MACRO IS STM, while Fujifilm lists 1:1 for the XF30mmF2.8 R LM WR Macro.

    First decide which part of the button you want to show, then compare the maximum magnification of the exact lens.

  • Confusing minimum focusing distance with room for lighting

    Minimum focusing distance is measured from the sensor plane; it is not the same as the clear space between the lens and the button. The two distances therefore answer different questions about your lighting setup.

    Where possible, look up the working distance at the magnification you plan to use and test whether you can position your light source effectively.

  • Expecting higher magnification to keep the whole button sharp

    Depth of field can be shallow in macro photography. Focus stacking can increase the apparent depth of field by combining images taken at different focus points, but it requires extra shots and post-processing.

    Take some test shots first and assess how much of the button you want in focus before choosing a lens based solely on maximum magnification.

Brands to compare

Sony

The FE 90mm F2.8 Macro G OSS is a Sony E-mount option for comparing 1:1 magnification and working space for tabletop subjects.

  • Sony lists 1.0× maximum magnification and a working distance of around 13 cm for this model.
  • These figures apply to the FE 90mm; check that the Sony E mount fits your camera.

Canon

The Canon RF range includes an RF 35mm for close-ups and an RF 100mm for anyone looking for greater magnification.

  • Canon lists a maximum of 0.5× for the RF 35mm F1.8 MACRO IS STM and 1.4× for the RF 100mm F2.8L Macro IS USM.
  • The difference in magnification matters for your preferred framing. Both are RF versions and won’t automatically fit a different mount.

Fujifilm

The XF30mmF2.8 R LM WR Macro is a Fujifilm X-mount lens with 1:1 magnification for detailed shots.

  • Fujifilm lists a weight of around 195 g and a minimum focusing distance of 10 cm for this model.
  • The distance is measured from the sensor plane and doesn’t indicate how much clear working space remains in front of the lens.

Nikon

The NIKKOR Z MC 105mm f/2.8 VR S is a Nikon Z macro lens for 1:1 photography.

  • Nikon lists 1:1 magnification and built-in vibration reduction for this model.
  • Check that the Nikon Z mount suits your camera model. Descriptions of image quality are not independent measurements.

Sigma

The 105mm F2.8 DG DN MACRO | Art is available in separate Sony E and L-Mount versions.

  • Sigma lists 1:1 magnification and a minimum focusing distance of 29.5 cm.
  • The minimum focusing distance is not a listed working distance. Choose the version with the mount that fits your camera.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is a Micro Four Thirds option for highly magnified detail shots.

  • OM lists a maximum of 4× in 35 mm equivalent terms for this model.
  • This figure is not directly comparable with magnification ratios that haven’t been converted in this way. You may not need maximum magnification to photograph a whole button.

Joybuy products

Related products coming soon.

Frequently asked questions

Should I always photograph a button at maximum magnification?

No, choose the magnification according to the framing you want. Maximum magnification describes what a lens can achieve at its closest focusing distance; a 1:1 shot reproduces a small subject at life size on the image sensor.

Is minimum focusing distance the same as the space available for your light?

No, minimum focusing distance and working distance are different measurements. Sony lists a minimum focusing distance of 28 cm and a working distance of around 13 cm for the FE 90mm F2.8 Macro G OSS. Use the specifications for the exact lens and shooting setup when making your choice.

How can I get a domed button sharp from front to back?

Start by taking test shots with carefully controlled focus. If the depth of field isn’t enough, use a stable setup to take several images at different focus points, then combine them using focus stacking. This requires extra shooting and editing.

What if a lens I bought online turns out not to suit my camera?

In the Netherlands, when you buy from a business remotely, you generally have a 14-day cooling-off period, according to the Dutch government. This information applies to purchases from a business; check the mount and the terms of the specific sale before buying.

Is the statutory warranty on a lens in the Netherlands always limited to two years?

No, according to the Dutch government, the Netherlands does not have a fixed statutory warranty period. You’re entitled to a product that works properly for as long as you can reasonably expect it to; if there’s a fault, contact the seller. A manufacturer’s warranty or an extended warranty is in addition to your statutory rights.