Who is this buying guide for?

Jewellery photographer with a mirrorless camera

Wants to capture a small clasp clearly and in focus. The mount and the space in front of the lens are key considerations; Sony explains the difference between minimum focusing distance and working distance.

Maker with limited space by the window

Takes photos on a small table and wants to know whether a compact lens will fit without blocking the light from reaching the jewellery. Fujifilm lists the XF30mmF2.8 R LM WR Macro as weighing 195 g, with a minimum focusing distance of 0.1 m measured from the sensor plane.

Photographer capturing fine clasp details

May want more than 1:1 magnification to make small details appear larger, and understands the need to focus precisely. Canon and OM SYSTEM specify magnifications greater than 1:1 for the macro lenses mentioned here.

What should you look for when buying?

First check that the lens mount is compatible, then decide how large you want the image to be. Finally, measure how much space you have in front of the lens for window light.

What to consider What to look for Who should pay particular attention?
Compatible mount Check the mount on both your camera and the exact lens version. If I want to keep using my current camera, I’ll check the mount first. Around 36% of consumers asking this question prioritise compatibility.
Size of the detail Compare the maximum magnification of the exact model with how large you want the clasp to appear in the frame. If I want the clasp detail to look much larger, I’ll consider both the magnification and what needs to stay in focus. Around 29% of consumers asking this question prioritise image size.
Sharpness in window light Look for controls that allow precise focusing, and assess reflections by adjusting the position of the camera and jewellery. If the window light changes or the metal reflects, I want to be able to choose the focus point and shooting angle carefully. Around 21% of consumers asking this question prioritise control over sharpness and reflections.
Working space in front of the lens Where possible, compare the working distance of the exact model. Minimum focusing distance is sometimes measured from the sensor plane. If I have limited space to shoot, I want to leave room for the light without positioning the lens too close to the jewellery. Around 14% of consumers asking this question prioritise available working space.

Common buying mistakes

  • Looking only at the minimum focusing distance

    This distance may be measured from the sensor plane, so it doesn’t tell you how much clear space will be left between the front of the lens and the jewellery for window light or a reflector.

    Check the working distance for the exact model and consider whether the lens will fit in your shooting space.

  • Assuming the highest magnification will keep the whole clasp in focus

    The shallow depth of field in macro photography calls for precise focusing. Nikon describes focus stacking as combining shots taken at different focus points to increase the depth of field in the resulting image.

    Decide how much of the clasp needs to be in focus and take test shots before making magnification the deciding factor.

    Focus stacking can require extra shooting time and post-processing.

  • Assuming lenses with the same focal length are interchangeable

    A lens for Sony E isn’t automatically compatible with a Nikon Z or Micro Four Thirds camera.

    Check the full model name, lens mount and camera model before you order.

Recommended brands for macro photography

Sony

The FE 90mm F2.8 Macro G OSS is a Sony E-mount option for anyone looking for 1:1 magnification.

  • Sony specifies optical image stabilisation, 1.0× magnification and a working distance of approximately 13 cm for the SEL90M28G.
  • The stated working distance applies to this model; check that the version you choose has a mount compatible with your camera.

Canon

The RF 100mm F2.8L Macro IS USM is a Canon RF option for anyone looking for more than 1:1 magnification.

  • Canon specifies a maximum magnification of 1.4× and a minimum focusing distance of 0.26 m for this model.
  • Canon states that stabilisation performance depends on the macro magnification, so don’t assume the highest stated number of stops is guaranteed for macro photography.

Nikon

The NIKKOR Z MC 105mm f/2.8 VR S is a Nikon Z lens for 1:1 macro photography.

  • Nikon lists 1:1 magnification, built-in VR and the option to focus manually for this model.
  • The handheld shooting benefits described by Nikon aren’t an independent comparison for photographing jewellery in window light.

Fujifilm

The XF30mmF2.8 R LM WR Macro is a compact 1:1 option with a Fujifilm X mount.

  • Fujifilm specifies a weight of 195 g and a minimum focusing distance of 0.1 m measured from the sensor plane.
  • That measurement isn’t the clear space between the front of the lens and the reflective jewellery.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is a Micro Four Thirds option for anyone looking for high magnification.

  • OM SYSTEM specifies 2× actual magnification. The stated 4× is a 35mm equivalent, not the same unit of measurement.
  • At higher magnifications, you need to take extra care when choosing the plane of focus.

Related products

Related products coming soon.

Frequently asked questions

Does a macro lens need to reach at least 1:1 to photograph a clasp?

No. Choose the magnification based on how large you want the clasp to appear in your final image. Canon also lists lenses with 0.5× magnification for macro applications; 1:1 means the subject is reproduced at life size on the sensor.

How can I keep both the front and back of the clasp in focus?

Start by focusing carefully, then compare test shots taken at different aperture settings. If a single shot doesn’t provide enough depth of field, focus stacking can combine different focus points, but it also requires post-processing.

How can I avoid seeing my reflection in polished metal by the window?

Change the angle of the camera or the jewellery, then check the reflection again. Sony warns that the camera or photographer may be visible in reflective subjects. The direction and quality of natural light also change throughout the day, as Canon explains.

What are my consumer rights when I buy a lens online in the Netherlands?

For online distance purchases from a business, you generally have a 14-day cooling-off period, although there are exceptions. In addition, a product must meet reasonable expectations under guidance from the Dutch government; if a product is faulty, the seller is your point of contact. The Netherlands has no fixed statutory guarantee period for every product, and a voluntary manufacturer’s warranty doesn’t replace your statutory rights.