Who might need a DAC headphone amplifier?

Wired headphone listener

You want to know whether the connection you already use is sufficient before buying extra equipment. The plug on your headphones and the output on your chosen device determine which connections are compatible. Apple Support explains that wired lossless listening doesn’t always require an external DAC.

Listener with a compact workspace

Your desk moves up and down, and you’re looking for a small USB solution that works with your source. Consider the connection and make sure there’s enough cable slack across the full adjustment range. AudioQuest lists a USB-C extension adapter for the DragonFly Cobalt; check which connection and any adapters your source requires.

Listener with a fixed audio setup

You want an easy-to-reach volume control and might also want to connect active speakers or a second digital source. Compare the connections and power requirements of the exact model; FiiO and iFi audio describe different connection and power options for their desktop models.

What should you look for?

Keep your existing wired connection

Best if: your current connection drives your headphones adequately and you don’t need extra controls or connections. Apple describes wired lossless listening without requiring an external DAC as a general rule.

Keep in mind: you’ll keep the controls and connections on your current source, so check its playback settings.

A compact USB DAC/amplifier

Best if: you’re short on space and want to connect wired headphones to a compatible laptop or phone. Check the USB connection and headphone plug on the exact version.

Keep in mind: a compact adapter may offer fewer connections and physical controls than a desktop model.

A fixed desktop DAC/amplifier

Best if: you want a physical volume control, a suitable headphone output or extra connections at your fixed workstation.

Keep in mind: allow space for the device, its cables and possibly a separate power supply. According to FiiO, the FiiO K11 requires a 12 V/2 A DC power supply; the iFi ZEN DAC 3 can be powered via USB-C.

What to consider What to look for Who is it mainly for?
Headphone connection Check the plug and output on the exact version. Only compare power ratings when the load and output type are the same. If you want to keep using your current headphones, you’ll need to know whether the plug and output are compatible. Around 33% of consumers put compatibility first.
Lossless playback chain Check the source, software settings, digital connection and supported formats of the exact model. Apple says an external DAC is needed for Apple Music above 48 kHz on an iPhone or iPad. If your main concern is making sure the source and settings can play the files you want, the playback chain comes first. Around 27% of consumers prioritise this.
Space and cable routing Measure the available space and plan the cable routing across the full adjustment range of your desk. Check whether the model can be powered via USB or requires a separate power supply. If your desk moves, you’ll want a setup that fits, with enough cable slack at every height. Around 20% of consumers focus mainly on space and cable management.
Controls and extra connections Decide whether you’ll connect a second digital source or active speakers. Check whether the line output is fixed or variable. If you want the volume control within easy reach or need to connect other devices, these features will be key. Around 20% of consumers prioritise controls and extra connections.

Common buying mistakes

  • Assuming lossless always requires an external DAC

    Not every listener needs an external DAC for wired lossless playback. Apple doesn’t state this as a general requirement.

    First check your current wired connection and playback settings, and whether you actually need extra connections, power or controls.

  • Applying a power rating for one output to another

    The FiiO K11’s power ratings vary by output. The stated 1400 mW per channel applies at 32 Ω via the 4.4 mm output, and doesn’t automatically apply to the 6.35 mm output.

    Compare power ratings alongside the load and output type, and check which plug your headphones have.

  • Forgetting about power and moving cable routes

    Desktop models can have different power requirements. With a sit-stand desk, the cable route also needs to allow for the full height adjustment.

    Check the power requirements of the exact model and plan your cables before connecting the device at your workstation.

Brands to compare for this choice

FiiO

The KA11 is a compact USB DAC/amplifier, while the K11 is a desktop model with several inputs and headphone outputs. They’re different versions for different setups.

  • According to FiiO, the K11 has a volume control, 6.35 mm and 4.4 mm headphone outputs, and an RCA line output.
  • According to FiiO, the K11 requires a 12 V/2 A DC power supply. The rated 1400 mW per channel applies at 32 Ω via the 4.4 mm output.

iFi audio

The ZEN DAC 3 is a fixed USB DAC with headphone outputs and connections for a wider audio setup.

  • The manual lists 6.3 mm and 4.4 mm headphone outputs, a physical volume control, and fixed or variable line output.
  • iFi specifies USB-C power; check that your source and chosen power setup are compatible. Claims about improved sound aren’t an independent comparison.

AudioQuest

According to AudioQuest, the DragonFly Cobalt is a compact USB DAC, preamplifier and headphone amplifier for a compatible source and wired headphones.

  • AudioQuest lists support up to 24-bit/96 kHz and includes a USB-C extension adapter.
  • According to AudioQuest, the Lightning devices mentioned require a separate adapter. Check which connection your source needs.

S.M.S.L

According to the manufacturer, the D100 is a desktop DAC/headphone amplifier with USB-C and RCA connections.

  • S.M.S.L’s product information lists two USB-C ports, RCA line outputs, and 6.35 mm and 4.4 mm headphone connections.
  • Check that the connections and power requirements of the exact version suit your headphones and workspace.

Related products

Related products coming soon.

Frequently asked questions

Do I always need to buy an external DAC for Apple Music Lossless?

No. Apple describes wired lossless listening without a general requirement for an external DAC. However, Apple specifies an external DAC for tracks above 48 kHz on an iPhone or iPad. Also check that Lossless Audio is enabled in the app.

How do I connect and set up a desktop DAC?

First check the power requirements of the exact model, then connect the digital source and a compatible pair of headphones. Start with the volume low; the iFi ZEN DAC 3 manual warns you to do this before changing the gain setting.

Can I return a DAC bought online in the Netherlands?

For a standard online purchase by a consumer, the statutory cooling-off period usually ends 14 days after delivery, according to ACM ConsuWijzer. Before ordering, check which exceptions and returns conditions apply to your purchase.

Does a DAC always come with a two-year statutory guarantee in the Netherlands?

No. According to the Dutch government, there’s no fixed statutory guarantee period in the Netherlands: you’re entitled to a product that works properly for as long as you can reasonably expect it to. A manufacturer’s guarantee is in addition to your statutory rights.

What should I look for when buying an electrical DAC from outside the EU?

The Dutch government states that electronic devices sold in the EU must have a CE marking. Check the specific version, its documentation and the suitable power supply; a brand or model name alone doesn’t confirm that a product on offer meets the requirements.