Workshop attendee with weak Wi-Fi in the loft
You want to watch and take part from one fixed spot in the loft. First, check whether a wireless extender can still receive a strong enough signal from a halfway point.
Start by testing your Wi-Fi in the loft and at potential halfway points: a wireless extender will only help if it can still receive a usable signal itself. If you can run Ethernet upstairs, compare this with a wired access point. If other rooms are also hard to reach, consider multiple Wi-Fi points and check they’re compatible with your router. If running a cable isn’t practical and a wireless connection between floors isn’t up to the job, powerline could be an alternative, but results depend on your home’s electrical wiring.
You want to watch and take part from one fixed spot in the loft. First, check whether a wireless extender can still receive a strong enough signal from a halfway point.
You can run Ethernet to the converted loft and compare a wired access point with a wireless connection between floors.
You want to get a signal in other areas as well as the loft. So look at how many Wi-Fi points you need and whether they’re compatible with your router.
Suitable if: the loft is the main area with poor reception and you can find a spot between the router and the loft with a usable signal.
Bear in mind: distance and obstacles. An extender placed somewhere without a usable signal from the router won’t fix the connection. The Dutch Consumers’ Association (Consumentenbond) recommends positioning Wi-Fi points so they can reach one another.
Suitable if: you can run Ethernet to the loft and want to create a new Wi-Fi point there.
Bear in mind: the cable route and whether your chosen model supports access point mode. TP-Link describes this mode for the RE605X and RE705X.
Suitable if: not just the loft but also other rooms or floors have poor reception.
Bear in mind: how many points you need and whether they’re compatible with your router. TP-Link OneMesh requires a compatible OneMesh router; FRITZ! describes mesh networking with a FRITZ!Box.
Suitable if: running a cable isn’t practical and the wireless connection upstairs isn’t working well.
Bear in mind: you’ll need adapters at the required connection points, and results depend on your home’s electrical wiring. You’ll need to test it in your own home.
| What to consider | What should you check? | Who is this most relevant to? |
|---|---|---|
| Signal reaching the loft | Test the connection in the loft and at potential halfway points; check whether the exact model has a signal indicator or setup assistance. | I want good coverage where I sit in the loft, but the extender also needs to maintain its own connection along the way. Around 33% of consumers put loft coverage first. |
| Live workshop connection | Try the workshop service you use in the loft and compare it with the connection near the router. A stated maximum Wi-Fi speed isn’t a measurement of performance in that spot. | I want to be able to follow the video and audio during a live session. Around 27% of consumers make a working workshop connection their main priority. |
| Cabling and installation | Check whether you can run Ethernet to the loft and whether the exact Wi-Fi point supports access point mode. | I’m weighing up whether running a cable is worth it compared with a wireless connection. Around 20% of consumers make this choice their main concern. |
| Coverage beyond the loft | Make a note of which rooms have weak reception, then check router compatibility and how many Wi-Fi points you need. | I want to improve coverage in more than one area and find out whether the points will work with my router. Around 20% of consumers prioritise coverage in multiple rooms. |
A wireless extender needs to receive a signal from the router itself. So the spot where you want to use it won’t necessarily be the best place for the device.
Test potential halfway points before choosing a wireless option.
A stated maximum doesn’t show how the connection performs in the loft or during a video call. The Dutch Consumers’ Association (Consumentenbond) describes tests carried out in different locations and at different distances.
Test your own laptop and workshop service in the loft, and compare the connection with the one near the router too.
The OneMesh and FRITZ! mesh features described have specific system requirements. Having the same Wi-Fi network name doesn’t, by itself, prove that the mesh feature you want is available.
Before buying, check your router and the compatibility information for the exact model.
The manufacturer’s Dutch-language pages describe the RE605X and RE705X as Wi-Fi 6 extenders that can also be used as wired access points.
The FRITZ!Repeater 1200 AX is worth comparing if you use a FRITZ!Box or are looking for a repeater with a LAN connection.
The Magic 2 WiFi 6 next Starter Kit is a powerline option to compare if running a cable isn’t practical and a wireless connection between floors isn’t working well.
NETGEAR describes the EAX15 as a Wi-Fi 6 extender with a gigabit port.
This selection includes a powerline starter kit, a multi-point mesh set, wireless repeaters and an access point: different ways to get Wi-Fi into the loft.
Image unavailable
A powerline starter kit to consider if you want to get Wi-Fi into the loft without relying solely on a wireless connection.
Before buying, check that the kit suits the connections and wiring in your home.
Image unavailable
A set of three to consider if you need multiple Wi-Fi points for rooms or floors with weak coverage.
The product name lists dual-band (2,4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).
Image unavailable
A wireless repeater to consider if you want to extend your existing Wi-Fi coverage and can find a spot that still receives a usable signal from the router.
Test reception at the chosen halfway point before assuming the connection will reach the loft.
Image unavailable
A wireless repeater to consider if you want to extend an existing connection and still have network coverage where you plan to install it.
Before choosing, check the network connection and positioning requirements for your setup.
Image unavailable
An access point/extender to consider if you can run Ethernet to the loft and want to compare a wired option.
The product name lists two antennas, speeds of up to 300 Mbps and passive PoE.
Place it somewhere between the router and the loft where it can still receive a usable signal from the router. Don’t automatically put it in the loft room with the weakest reception. The Dutch Consumers’ Association (Consumentenbond) recommends minimising obstacles and mentions an indicator light or app as a guide to finding the right spot.
Yes, if your chosen model supports access point mode. TP-Link documents this mode for the RE605X and RE705X; check the instructions for the exact model to find out how to connect it via Ethernet.
Test the workshop service in the loft and compare the connection with the one near the router. This will help you work out whether the issue is mainly noticeable in the loft. A stated Wi-Fi speed on its own won’t predict how the session will go there.
Check that the exact version on offer has the required CE marking. The Dutch Authority for Digital Infrastructure states that equipment with a CE marking meets the applicable European requirements; the model name alone doesn’t confirm that the version on offer has been checked.
For online purchases in the Netherlands, you’ll generally have a statutory cooling-off period; ACM ConsuWijzer states that it ends 14 days after delivery. Check the terms that apply to your purchase and test the connection in the actual spot where you’ll use it in the loft.