Home worker with one Wi-Fi dead spot
You work in the loft while the rest of the house has sufficient coverage, and want to know whether one well-placed repeater will do the job.
If the loft is the only weak spot and a socket before the loft still gets a usable Wi-Fi signal, start by comparing a single repeater. If you can run a network cable upstairs, compare that option with an access point. Mesh may be a good fit if coverage is weak in several rooms, while powerline is an alternative if neither a cable nor a wireless connection between floors is practical. Test the transfer at your workspace, and check separately with your organisation how work documents should be stored and protected.
You work in the loft while the rest of the house has sufficient coverage, and want to know whether one well-placed repeater will do the job.
You regularly send work files from the same desk and are looking into whether a network cable with an access point is an option.
The loft isn’t the only area with poor coverage. You’re comparing multiple Wi-Fi points with a connection over the mains if running a cable isn’t practical.
When: if just one loft room is a weak spot and there’s a midway location that still gets a usable signal from the router.
Trade-off: little installation work, but the connection between the router and repeater remains wireless.
When: if you can run a cable to the loft and work there from a fixed desk. TP-Link lists an access point mode for the RE605X.
Trade-off: you’ll need to run a cable, so check the cable route and access point settings in advance.
When: if other rooms or floors also have weak coverage. TP-Link describes ethernet backhaul for Deco under specific connection conditions.
Trade-off: you’ll need to place several points. A point placed wirelessly still needs a usable network connection.
When: if running a cable isn’t practical and the wireless connection between floors is inadequate.
Trade-off: performance can vary between sockets; devolo also notes that electrical appliances may have an impact.
First, work out where coverage is weak and what kind of connection to the loft is practical. Then measure the actual transfer speed at your regular workspace.
| Concern | What to check before buying | Who should pay extra attention? |
|---|---|---|
| Coverage in one loft room | Check the signal at possible midway sockets; look for any placement guidance and check compatibility with your router. | If only my loft room has poor coverage, I want to find a spot where the repeater itself still gets a usable signal from the router. Around 33% of consumers prioritise coverage in that one location. |
| Reliability of the backup connection | Find out whether the backup goes to a local server or over the internet; test the transfer speed in the loft and check whether a cable with an access point is an option. | For regular backups from the same desk, I want to know whether a cable with an access point is an option and test the transfer speed at my workspace. Around 27% of consumers prioritise the connection during backups. |
| Protecting work documents | Check the relevant security settings and updates; agree the storage method with your employer or client. | I want to know in advance where work files are allowed to be stored; a Wi-Fi device doesn’t determine what’s permitted. Around 20% of consumers prioritise approved storage for work data. |
| Coverage beyond the loft | Map out rooms with weak coverage and check the number of points, connection options and compatibility with your router setup. | If several rooms have poor coverage, I want to coordinate the number and placement of the points. Around 13% of consumers prioritise coverage in multiple locations. |
| Ease of installation and purchase | Check what’s included in the kit and whether you’ll need spare sockets or to run cables. | I want to know before buying which devices are included in the kit and how much installation is involved. Around 7% of consumers prioritise ease of purchase and installation. |
A repeater can have an ethernet port and still connect to the router wirelessly. TP-Link says the RE605X also supports access point mode, which requires a wired network connection.
Map out the full connection from the loft computer to the router, then check which mode and cable route you’ll need.
A point placed wirelessly still needs to receive a usable connection to the network.
Test possible locations between the router and the loft. If none work well, compare them with a cable route.
An add-on adapter and a starter kit don’t necessarily contain the same components. devolo describes the Magic 2 WiFi 6 next Starter Kit as a set containing two adapters.
Check what’s included in the specific kit and test the sockets you plan to use.
A network device doesn’t determine whether a personal storage service is approved for work documents.
Agree with your employer or client where backups can be stored and how to manage them. The Dutch Data Protection Authority offers advice on protecting documents.
Worth comparing for both a standalone repeater and mesh with multiple points. These are different product types, and that doesn’t mean every model has the same features.
The FRITZ!Repeater 1200 AX is worth comparing if you already have FRITZ! equipment or can connect the repeater with a cable.
The Magic 2 WiFi 6 next Starter Kit is a powerline option to compare if running a cable or getting a usable wireless connection between floors is difficult.
The EAX15 is a standalone Wi-Fi 6 repeater worth comparing if you’re considering adding one Wi-Fi point to your existing router setup.
This selection includes mesh kits for Wi-Fi coverage in multiple locations and a powerline Wi-Fi kit. Radio equipment placed on the market in the Netherlands must meet the applicable European requirements and carry CE marking. Check the marking and product documentation for the specific model.
No image available
Worth comparing if you’re looking for mesh coverage in multiple locations; the product description lists two mesh units.
Wi-Fi 7. Per unit: one 10 Gbps port, one 2.5 Gbps port and one 1 Gbps port.
No image available
A mesh kit with three units to compare if several rooms need Wi-Fi coverage.
Dual-band 2.4 GHz / 5 GHz; Wi-Fi 5 (802.11ac). According to the product description, each unit has two ethernet ports.
No image available
Worth comparing if powerline Wi-Fi could be a way to connect to the loft; check that the contents of this starter kit suit your setup.
The product description lists IEEE 1901, Wi-Fi standards and a Type E plug.
No image available
A mesh kit with three stations to consider if several areas of your home need coverage.
Dual-band 2.4 GHz / 5 GHz; Wi-Fi 5 (802.11ac). According to the product description, each unit has two ethernet ports.
No image available
A mesh kit with three units to compare if you need coverage in multiple locations.
Dual-band 2.4 GHz / 5 GHz; Wi-Fi 6 (802.11ax). The product description lists three gigabit ports per unit.
Place the repeater somewhere it still gets a strong signal from the router, then check the connection in the loft. According to TP-Link, the RE605X’s signal indicator can help you choose a location. Then test the backup connection at your own workspace.
No. An extender changes the network connection, not the storage destination or backup process. The Dutch Data Protection Authority advises storing sensitive work documents on your work server; check with your organisation which procedures are approved.
devolo recommends plugging the adapters directly into different wall sockets and checking whether nearby appliances are affecting the connection. Trying another socket may give you a different result.
No. An advertised Wi-Fi speed isn’t a measurement of the complete connection to its destination. Test the transfer from your workspace. For Wi-Fi features that rely on Wi-Fi 6, the devices you use must support those features.
Radio equipment placed on the European market must meet the applicable product requirements and carry CE marking. Check the marking and documentation for the specific model, and follow the installation instructions.