Who is this for?

Working from home in the loft

You want to know how to get a reliable connection upstairs when the router is elsewhere in the house. The Dutch Authority for Digital Infrastructure points out that 5 GHz has a shorter range than 2.4 GHz.

Households with simultaneous calls

Several people are using video and audio at the same time. You’ll want to assess both the Wi-Fi in the loft and your shared internet connection.

Keeping your provider’s router

You’re looking for an extension that works with your existing network and want to know which connection mode you’ll need.

What should you consider when choosing?

Wired access point or mesh

Choose this option if: you can run an Ethernet cable to the loft and want to install an extra Wi-Fi access point there.

Bear in mind: you’ll need the right connections and support for the correct mode. After installation, check that the wired connection is active.

Wireless mesh

Choose this option if: running a cable isn’t practical, but you can place an extra node somewhere the main unit’s signal is still usable.

Bear in mind: the connection between the nodes remains wireless and can be affected by distance, floors and placement.

Move or replace your router

Choose this option if: your current router is poorly positioned and moving it could improve coverage in the loft.

Bear in mind: a newer Wi-Fi standard or a higher advertised speed doesn’t guarantee that the signal will travel effectively through a floor.

What to consider What should you check? Who is this important for?
Coverage in the loft Test the connection at your workspace and at possible locations for an extra node. Check whether Ethernet backhaul or access point mode is supported. If I work upstairs, I want to know that the connection is usable in the loft before choosing equipment. Around 36% of consumers prioritise coverage in the loft.
Simultaneous calls Compare the connection near the router and in the loft while several people are on calls at the same time. See where the connection starts to deteriorate. If several people at home are on video calls at once, I want to know whether the limiting factor is the Wi-Fi in the loft or the internet connection. Around 29% of consumers prioritise simultaneous calls.
Connecting to your existing network Check the connection mode, available ports and any requirements set by your provider. TP-Link says that both routers must support the feature to use Ethernet backhaul via EasyMesh. If I want to keep my provider’s router, I want to know in advance whether the extension will work with it and how to connect it. Around 21% of consumers make keeping their existing router their top priority.
Maintenance and installation Check the update policy and CE marking for the version on offer. Also work out how many nodes and connections your setup will need. If I’m choosing equipment for the long term, I want to know what maintenance and installation the setup will involve. Around 14% of consumers prioritise cost and maintenance.

Radio equipment sold in the Netherlands must meet European requirements and carry a CE marking, according to the Dutch Authority for Digital Infrastructure. Check the marking on the exact version; the brand name alone doesn’t tell you anything about this.

Common pitfalls

  • Relying solely on the advertised Wi-Fi speed

    A speed specification doesn’t tell you how the connection will perform in the loft. Placement and the connection between floors also matter. The Dutch Authority for Digital Infrastructure notes that 5 GHz has a shorter range than 2.4 GHz.

    Test the connection at your workspace and at possible locations for an extra node before deciding between moving the router, mesh and a wired extension.

    Some setups may still need an extra node or network cable.

  • Assuming every mesh system supports wired backhaul

    This feature depends on the devices and their settings. According to TP-Link, both routers must support Ethernet backhaul via EasyMesh.

    Check the exact models and firmware, then make sure the connection is actually using Ethernet after installation.

    A cable or extra router won’t provide the feature you want if the equipment doesn’t support it.

  • Assuming sets with different numbers of units are the same

    A two-piece set and a three-piece set don’t contain the same items. Check the full model name and number of units before planning your setup.

    Compare what’s included with the number of points you want to place in your chosen locations.

    You may need an extra unit later to complete your planned setup.

Brands to compare

TP-Link

The Deco X50 range includes Wi-Fi 6 mesh systems with router and access point modes. TP-Link lists three gigabit ports per unit and describes Ethernet backhaul for Deco.

  • Worth considering if you’re looking for a system that can be expanded using either a wired or wireless connection.
  • Check the set size and version; the stated coverage doesn’t guarantee range in your loft.

FRITZ!

FRITZ! describes the Mesh Wi-Fi Set 1700 as compatible with an existing router or modem, and offers sets with different numbers of units.

  • Worth considering if you want to keep your existing router and add an extension.
  • Check the exact set and how it connects. FRITZ!’s claims about Wi-Fi and video calls are manufacturer claims, not a measure of performance in your home.

ASUS

ASUS describes AiMesh as a feature that allows compatible routers and nodes to connect via a cable.

  • Worth considering if you already have a compatible ASUS router or are looking at an expandable router system.
  • Compatibility and settings vary by model; support for the feature alone doesn’t tell you how a particular set will perform in the loft.

devolo

devolo describes mesh sets that can be used with an existing router.

  • Worth considering if you want to compare a complete mesh set with other ways to extend your Wi-Fi.
  • Compare the ports and operating modes on the exact version; a general product description can’t predict performance in your loft.

Joybuy products

These product options include TP-Link Deco mesh sets and an Omada access point for extending Wi-Fi at home. For each version, check that the number of units, connections and installation requirements suit your loft and existing network.

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), Wi-Fi 6

A mesh set with three units to extend Wi-Fi to multiple points around your home. Check where the extra points can connect to the main unit.

Wi-Fi 6; three gigabit ports per unit. The product information lists optional Ethernet backhaul.

View at Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

A standalone access point to consider if you have a suitable wired connection to your workspace and want to add Wi-Fi there.

Wi-Fi 6; one gigabit Ethernet port; PoE power and ceiling or wall mounting are listed. A suitable installation is required for the mounting and power supply described.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack), tri-band Wi-Fi 6E

TP-Link Deco XE75 Pro (3-pack), Wi-Fi 6E

A tri-band mesh set with three units for a setup with multiple Wi-Fi points. Check that the placement and connections between units will work in your home.

Wi-Fi 6E; tri-band on 2.4, 5 and 6 GHz; three gigabit ports per unit.

View at Joybuy
TP-Link Deco X50-PoE (3-pack), Wi-Fi 6

TP-Link Deco X50-PoE (3-pack), Wi-Fi 6

A mesh set with three units to extend Wi-Fi to several areas. The listed PoE feature is only suitable for an installation with a compatible PoE power supply.

Wi-Fi 6; two Ethernet ports per unit; PoE is listed. A suitable power supply setup is required for PoE installation.

View at Joybuy
TP-Link Deco X50 (2-pack), dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack), Wi-Fi 6

A mesh set with two units to extend Wi-Fi to more than one area of your home. Check that you can place the units in suitable locations.

Wi-Fi 6; three gigabit ports per unit. The product information lists optional Ethernet backhaul.

View at Joybuy

Frequently asked questions

Do I need to replace my provider’s router to extend Wi-Fi to the loft?

No, not necessarily: a compatible system can work behind your existing router. Check the connection and access point modes on the exact version. If you want to connect your own modem, ask your provider about its connection and security requirements.

How can I check whether a Deco node is using an Ethernet connection?

TP-Link says you can check whether Ethernet backhaul is active for the satellite node in the network map in the Deco app. Also follow the connection diagrams for your chosen router or access point mode.

Can mesh improve an internet connection that’s already struggling at the main router?

Mesh can extend Wi-Fi to more areas of your home, but it doesn’t add capacity to your internet connection. Compare the connection near the main router and in the loft while several people are on calls at once. Microsoft explains that when bandwidth is insufficient, Teams prioritises audio over video.

What should I bear in mind when using my own router in the Netherlands?

ACM ConsuWijzer explains that you have the right to choose your router, but a provider may refuse a device if certain security requirements aren’t met. Keep your equipment up to date and check the CE marking on the exact version. Radio equipment sold in the Netherlands must meet European requirements, according to the Dutch Authority for Digital Infrastructure.