Portfolio uploader with a dedicated loft workspace
You send large files from one workspace and want to find out whether Wi-Fi or your internet connection is limiting your upload speed.
First, measure your upload speed using a cable connected to your router, then compare it with the speed at your workspace. A Wi-Fi booster won’t make a slow internet connection faster. If reception is poor in just one spot, a well-placed repeater may be enough. If you can run an Ethernet cable to the loft, an access point connected via that cable is an alternative that relies less on Wi-Fi passing through walls and ceilings. Mesh may suit you if there are several problem areas, but the connection between the units and compatibility with your router are still important considerations.
You send large files from one workspace and want to find out whether Wi-Fi or your internet connection is limiting your upload speed.
Your connection drops out in a spot behind walls or ceilings, and you want to weigh up whether a repeater placed between your router and the problem area or a wired access point is right for you.
You need coverage in more than one place and are comparing a mesh system with individual Wi-Fi access points.
Before choosing networking equipment, compare a wired upload test at your router with the upload speed at your workspace. The Dutch Consumers’ Association recommends using a speed test over a network cable to assess your internet connection.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Upload speed at your regular workspace | Compare repeated wired tests at your router with tests at your workspace; only then consider adding another Wi-Fi access point. | If I mainly send large portfolio files from one regular workspace, I want to know whether my internet connection is limiting my upload speed. Around 36% of consumers say reliable uploads at their workspace are their main concern. |
| Reception behind walls and ceilings | Test possible locations between your router and the problem area, and check whether the device has access point mode if Ethernet is available. | When my connection drops out behind obstacles, I want to know whether a repeater can still receive the router’s signal there, or whether I can run a cable to an access point. Around 29% of consumers give top priority to reception through obstacles in the loft. |
| Coverage in several places | Decide where you need coverage and how many units you need; if you can use cables, check whether the exact model supports Ethernet backhaul. | If I need a connection in different work and living spaces, I want to be able to position each unit to suit the location. Around 21% of consumers prioritise coverage in several places. |
| Compatibility and running costs | Check compatibility with your router, how many units you need, update support and the stated power consumption of the exact model. | If I want to keep my router and am considering several units, I want to know which features work together and what it means to leave the equipment plugged in all the time. Around 14% of consumers prioritise compatibility and running costs. |
Radio equipment placed on the EU market must meet the applicable product requirements and carry CE marking. The Dutch Authority for Digital Infrastructure explains this requirement; check it for the specific model you are considering.
Upload speed also depends on your internet connection and the connection between your router and workspace.
First compare the wired upload speed at your router with the speed at your workspace. Don’t use Wi-Fi product specifications to predict how quickly your portfolio will upload.
Walls, ceilings and distance can also weaken the signal the repeater needs to receive from your router.
Try a spot between the router and the problem area where the router’s signal is still usable. If you can run Ethernet to the loft, check whether access point mode is available.
Some repeaters’ integrated mesh features depend on being used with a compatible router ecosystem.
Before buying, check compatibility between the exact router and repeater models; don’t rely on the term ‘mesh’ alone.
According to devolo, performance depends on factors including interference and the quality of your electrical wiring.
Test powerline using the sockets you intend to use, and don’t base your choice solely on the theoretical maximum speed.
The RE705X is a standalone Wi-Fi 6 repeater with access point mode via Ethernet. Deco X50-PoE is a separate mesh product range designed for multiple access points.
The FRITZ!Repeater 1200 AX is a standalone repeater with Gigabit LAN; when connected by network cable, it can also be used as a LAN bridge.
The WiFi 6 Repeater 5400 can be used as a repeater or access point. The separate Magic powerline range may be an alternative if Wi-Fi is unreliable and running Ethernet isn’t practical.
This selection includes mesh systems for coverage in several places and standalone repeaters for extending Wi-Fi in one area. For your loft, check where the units need to go, whether they’re compatible with your router and whether a wired connection is possible.
No image available
This two-unit set may suit you if you want to build mesh coverage in several areas. Decide in advance where the units can go and how they’ll connect to each other.
No image available
This mesh option is worth considering if you’re looking for a wired backhaul. Check that the exact model and your existing ASUS network suit your setup.
The product name specifies dual-band, 2.4 GHz / 5 GHz and Wi-Fi 7 (802.11be).
No image available
A standalone repeater may be suitable if one area needs extra Wi-Fi coverage and there’s still a usable connection to the router where you plan to place it.
The model name specifies 300 Mbps; this doesn’t predict the upload speed for your portfolio.
No image available
This three-unit mesh system is an option for building coverage in different areas. Decide in advance whether you can connect the units using cables.
The product name specifies dual-band, 2.4 GHz / 5 GHz and Wi-Fi 6 (802.11ax).
No image available
This standalone repeater may suit you if you want to extend your existing Wi-Fi coverage; it will still need a usable connection to the router where you place it.
First, run several tests using a laptop connected to your home network via a network cable, then compare the upload speed at your loft workspace. If the wired connection at your router is also slow, look into your internet connection or speak to your provider. If the speed is slow mainly at your workspace, check your Wi-Fi coverage and the position of your equipment.
Place a repeater somewhere it can receive a good signal from your router and reach the problem area; don’t automatically put it where the signal is weakest. If you can run a network cable to the loft, check whether access point mode is a suitable option.
Count the units that will stay plugged in and check the power consumption and available firmware updates for the exact model. The Dutch Consumers’ Association includes energy use and security in its testing method; also check the information for the version you’re considering.
For consumer purchases in the Netherlands, the seller is responsible for the statutory guarantee. According to the Netherlands Authority for Consumers and Markets, there is no fixed period of exactly two years: what matters is what you could reasonably expect from the product.
According to the Dutch Authority for Digital Infrastructure, using Wi-Fi at home is generally licence-free and there is no notification or registration requirement, provided you use the designated frequencies and follow the conditions of use. Radio equipment placed on the EU market must also meet the applicable product requirements and carry CE marking; check this for the specific model.