Who is this guide for?

Uploading from a loft with weak Wi-Fi

Your fixed broadband connection may be fast enough, but walls, ceilings or distance can weaken the Wi-Fi where you upload photos. You want to know whether moving your router or adding another Wi-Fi access point could help. The Consumentenbond lists obstacles as a possible cause of a weaker signal.

Uploading over a slow upstream connection

You want to send a large photo album and first check whether the upload speed included in your internet package is the limiting factor. A new router won’t necessarily solve the problem: ACM ConsuWijzer explains the upload speed associated with your fixed broadband connection.

Setting up your own network

You want to use a router or mesh system with your provider’s connection and equipment. The set-up you want, connection details and keeping your equipment updated are all relevant. ACM ConsuWijzer discusses using your own network equipment, while Veilig Internetten highlights the importance of updates.

What should you consider when choosing?

First, find out whether your fixed broadband upload speed or the Wi-Fi at your workspace is the limiting factor. Then choose between repositioning your router, adding a wired access point or using wireless mesh, based on which areas need coverage and which cables are available.

One centrally positioned router

A good fit if: your wired upload speed is good and Wi-Fi can reach your upload spot from a more suitable central location.

Trade-off: you’ll need less equipment, but walls or a ceiling may still obstruct the signal after you move the router.

Wired access point or mesh

A good fit if: obstacles separate you from your upload spot and you can run a suitable network cable to it. TP-Link lists ethernet backhaul for Deco X50.

Trade-off: you’ll need to consider cabling, positioning and the connections required for your chosen set-up.

Wireless mesh

A good fit if: Wi-Fi is weak in several areas and running a cable between the units isn’t practical.

Trade-off: walls and distance also affect the connection between mesh units. Place an extra unit where it can still connect to the main device.

Keep your provider’s router and measure first

A good fit if: you’re not yet sure whether you need new equipment, or your wired upload speed is disappointing.

Trade-off: if wired speeds are repeatedly low, speak to your provider first. Repositioning or changing equipment won’t work the same way for every connection.

What to consider What should you check? Who should pay particular attention?
Coverage where you upload Measure Wi-Fi at your workspace and check whether you can position the router centrally or run a cable to an extra access point. If I upload from a corner of the loft, I want to know whether walls or distance are weakening the Wi-Fi. Around 34% of consumers prioritise coverage where they upload.
Your actual upload speed Compare wired upload speed measurements with your contract, then measure over Wi-Fi where you upload. If I’m sending a large album, I want to know whether the fixed broadband connection or the Wi-Fi is slowing the transfer. Around 33% of consumers see their upstream connection as their main concern.
Connection and installation Check your provider settings, the connections required and whether your preferred cable route is practical. If I’m connecting my own network equipment, I want it to work with my provider’s equipment and the cabling in my home. Around 20% of consumers prioritise installation and connection.
Security and maintenance Check the CE marking on the version being offered and how firmware updates are provided for that model. If I manage my own router, I want to know how to keep it up to date and which version I’m buying. Around 13% of consumers prioritise security and maintenance.

Common mistakes

  • Assuming the Wi-Fi speed on the box is your internet speed

    A router’s stated speed doesn’t tell you whether your fixed broadband connection’s upstream speed is fast enough for uploading.

    First, measure your speed over a cable, then over Wi-Fi where you send the album. Compare the wired measurement with the upload speed in your contract. If the results are repeatedly low, speak to your provider.

    Replacing your router won’t fix a limit on your provider’s upload speed, so it could turn out to be an unnecessary purchase.

  • Putting a wireless mesh node where the signal is weakest

    An extra unit also needs a connection to the main device, and obstacles can weaken that connection.

    Check where the node can still get a good connection. See whether you can run a network cable between the units; compatible systems may support ethernet backhaul.

  • Choosing your own router without checking the version and updates

    The model name alone doesn’t confirm which version is being offered. Your own device also needs to be kept up to date.

    Check the CE marking and manufacturer details for the version you want to buy. Also find out how firmware updates for that exact model are made available and installed.

Brands to help guide your choice

TP-Link

The Archer AX55 is a standalone Wi-Fi 6 router, while Deco X50 is a mesh range. Deco X50-PoE is a separate version.

  • TP-Link Netherlands lists ethernet backhaul for Deco X50 and wall and ceiling mounting for the X50-PoE.
  • These are features of specific models, not a guarantee of upload speed or coverage in your loft. Also check how many units are included in the version you’re considering.

FRITZ!

According to FRITZ!, the FRITZ!Box 4060 is a network router that can be used behind a cable, DSL or fibre modem.

  • FRITZ! lists a 2.5-gigabit WAN port, mesh, telephone features and a five-year warranty for this model.
  • Its three LAN ports are gigabit ports. Extra features or WAN capacity won’t automatically make a photo upload faster.

ASUS

The RT-AX86U Pro is an example of a standalone router with configurable network features; the specifications mentioned apply to this model.

  • ASUS lists router and access point modes, AiMesh and a configurable 2.5G port for this model.
  • Stated Wi-Fi data rates are specification maximums. Check the port settings and the connection you use at home.

NETGEAR

Orbi is an example of a mesh system where the connection between the router and satellites is part of the installation decision.

  • NETGEAR describes ethernet backhaul for Orbi and recommends updating the firmware before setting up that connection.
  • That guidance doesn’t confirm that every Orbi package has the same features or performance.

Products at Joybuy for mesh or a single router

These products are worth considering when comparing a single router with mesh set-ups that provide extra Wi-Fi access points. Before buying, check that the version on offer, your cabling and your provider settings are right for your loft.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A mesh option to consider if you’re looking at multiple Wi-Fi access points and want to explore both wired and wireless connections between the units.

View at Joybuy
ASUS ZenWiFi BD4 dual-band, Wi-Fi 7, 2.4 GHz and 5 GHz

ASUS ZenWiFi BD4 Wi-Fi 7 dual-band

Worth considering if you’re looking for a ZenWiFi mesh set-up with a wired backhaul option. Check whether you can run that connection in your loft.

The product name lists Wi-Fi 7 and the 2.4 GHz and 5 GHz bands.

View at Joybuy
ASUS RT-AX52 Pro AX3000 dual-band router with Gigabit Ethernet

ASUS RT-AX52 Pro AX3000 router

A standalone router to consider if one centrally positioned Wi-Fi access point may be enough. The product information also mentions expansion with compatible ASUS mesh devices.

The product name lists dual-band and Gigabit Ethernet.

View at Joybuy
TP-Link Deco X50-PoE Wi-Fi 6, 3-pack with two ethernet ports per unit

TP-Link Deco X50-PoE Wi-Fi 6 (3-pack)

Worth considering if you want to position multiple mesh units and have PoE cabling available for your set-up.

The product name lists three units and two ethernet ports per unit.

View at Joybuy
TP-Link Deco X50 Wi-Fi 6 mesh, 2-pack

TP-Link Deco X50 Wi-Fi 6 (2-pack)

Worth considering if you want to position two mesh units and can connect them with a network cable. TP-Link lists ethernet backhaul for Deco X50.

The product name lists Wi-Fi 6.

View at Joybuy

Frequently asked questions

How can you tell whether Wi-Fi or your internet package is limiting your photo upload?

Measure your upload speed several times using a computer connected to your router with a network cable, then compare the results with the upload speed in your contract. Next, measure over Wi-Fi where you upload your photos. If your wired measurements are repeatedly below the agreed speeds, speak to your provider first.

Do you have to replace your provider’s modem to use your own router?

No. Depending on the model and set-up, you can connect your own router behind a modem. ACM ConsuWijzer explains the option of using your own modem or router and the connection details your provider must supply. Check which settings and network set-up you need for your connection.

What do you need to maintain when you install your own router?

Check whether firmware updates are available for the exact model and install them according to the manufacturer’s instructions. ACM ConsuWijzer says that keeping your own network equipment up to date is important for the security of your network and personal data.

Can you use your own Wi-Fi router in the Netherlands, and what should you check on the marking?

You can choose your own router if it meets the applicable safety requirements and doesn’t harm the network. ACM ConsuWijzer explains the option of using your own equipment. According to the Rijksinspectie Digitale Infrastructuur, a Wi-Fi router must carry the correct CE marking. Since 1 August 2025, applicable European cybersecurity requirements have also applied to radio equipment connected to the internet and newly placed on the market. The requirements depend on the device. Check the version on offer, not just the model name.

Is Wi-Fi 7 or 6 GHz enough to upload faster throughout your loft?

No. A Wi-Fi rating alone doesn’t guarantee faster upload speeds everywhere. ASUS notes that, at the same power, higher frequencies may have a shorter effective range. Also check which Wi-Fi standards your uploading device supports and measure the connection where you work.