Who is this guide for?

Portfolio uploader in the loft

You send large files from the loft and want to check whether your internet connection or Wi-Fi coverage is limiting your upload speed. The Consumers’ Association explains that upload speed matters for tasks such as sending photos and videos.

Household with a weak loft signal

You get poor reception mainly in the loft and are looking for a spot for a wireless access point where the router’s signal is still usable. The Consumers’ Association recommends considering obstacles and the connection between Wi-Fi points when deciding where to place them.

Household able to run a cable

You may be able to run an Ethernet cable to the loft and use an access point there, so your connection doesn’t rely solely on wireless reception between floors. TP-Link describes an access point mode for the RE605X.

What should you look for?

Wireless extender

Suitable if: you need better coverage in one spot in the loft and there’s somewhere between the router and the loft where reception is still usable.

Trade-off: the extender needs to receive the existing signal reliably, so its position is key.

Mesh Wi-Fi points

Suitable if: you want to cover several rooms or build a network with multiple points.

Trade-off: check how the points connect to each other and to your existing router. You’ll also need space and power for each one.

Ethernet cable with access point

Suitable if: you can run a cable to the loft and want to provide Wi-Fi there.

Trade-off: running a cable takes work and may require additional materials.

Powerline with Wi-Fi

Suitable if: running an Ethernet cable isn’t practical and a wireless extender can’t provide good coverage in the loft.

Trade-off: performance over your electrical wiring can vary between sockets. devolo also notes that electrical appliances may cause interference.

Concern What to check before buying Who is this most relevant to?
Actual upload speed Compare the upload speed using an Ethernet cable at the router with the Wi-Fi upload speed in the loft. When I send my portfolio, I want to know whether the internet connection itself is the limitation or whether it’s just the Wi-Fi upstairs. Around 36% of consumers prioritise upload speed above all else.
Usable coverage in the loft Check that an extender still receives a good signal from an intermediate position. If necessary, compare a cable or powerline connection at the intended loft location. I mainly need a usable signal upstairs and don’t want to put an access point somewhere the router’s signal is already too weak. Around 29% of consumers prioritise loft coverage above all else.
Compatibility with your network Make a note of your router model and check the requirements for the mesh feature you want, as well as how many points you’ll need. I want to know in advance whether the extender will work with my router and the network setup I have in mind. Around 21% of consumers prioritise compatibility.
Installation and ease of use Check how many adapters or points you’ll need, and whether you’ll have to run a cable or use a suitable wall socket. I want to know whether I can run a cable or position the required points easily. Around 14% of consumers prioritise installation and ease of use.

Common mistakes

  • Assuming the advertised Wi-Fi speed is your portfolio upload speed

    A high advertised Wi-Fi speed doesn’t, by itself, tell you how quickly files will upload from the loft. If your internet connection is the bottleneck, adding another Wi-Fi point won’t solve the problem.

    First, measure your upload speed with a cable at the router, then measure it over Wi-Fi in the loft.

  • Putting an extender where the signal is already too weak

    A wireless access point still needs to receive a sufficiently strong connection from your existing network.

    Try an intermediate position with as few obstacles as possible. If reception there isn’t usable, look into a wired connection or test powerline using the sockets you plan to use.

  • Assuming every mesh device works with every router

    The OneMesh feature described for the TP-Link RE605X requires a OneMesh router. Standard extender operation is a separate feature.

    Check the requirements for the exact device and mesh feature you want before choosing.

  • Assuming the advertised powerline speed is what you’ll get in the loft

    Performance over your electrical wiring can be affected by the sockets you use and sources of electrical interference.

    Test the connection using the wall sockets you plan to use, then measure the upload speed in the loft.

Brands and product ranges to consider

TP-Link

TP-Link offers the RE605X as a standalone extender, as well as the Deco X50-PoE mesh range for setups with multiple points.

  • TP-Link says the RE605X has an access point mode. The OneMesh feature described requires a OneMesh router.
  • For the Deco X50-PoE, check the version and what power supply or cabling your chosen setup requires.

FRITZ!

The FRITZ!Repeater 1200 AX is designed to extend your network over Wi-Fi or LAN, with additional mesh features when used in a compatible FRITZ! setup.

  • FRITZ! lists one gigabit LAN port and describes use with other routers.
  • The FRITZ! Mesh integration described assumes you have compatible FRITZ! equipment. An advertised maximum Wi-Fi speed isn’t the same as a measured upload speed in the loft.

devolo

The Magic 2 WiFi 6 next Starter Kit offers a powerline option for a loft where you want to transmit the signal over your electrical wiring.

  • devolo lists two gigabit ports on the Wi-Fi adapter.
  • According to devolo, certain sockets and sources of electrical interference can affect powerline performance, so test the route you intend to use.

KPN

KPN SuperWifi is a provider option for households that want to manage their home network through the accompanying app.

  • KPN describes placement advice and network management through the app.
  • These features don’t prove that one point will provide enough coverage or upload speed in a particular converted loft.

Joybuy product picks

These product picks focus on mesh points for coverage across multiple stations, and powerline Wi-Fi for a connection over your electrical wiring. The actual connection in the loft depends on the setup you choose and where you place it.

TP-Link Deco BE68 2-pack

TP-Link Deco BE68 2-pack

A good fit if you want to use multiple mesh points and are considering a wired or wireless connection between them.

The product description lists two units, wired and wireless backhaul, and WAN/LAN ports.

Joybuy
TP-Link Deco E4 3-pack

TP-Link Deco E4 3-pack

A good fit for a setup where you want to use multiple mesh stations to provide Wi-Fi coverage.

The product description lists dual-band Wi-Fi (2,4 GHz/5 GHz), Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.

Joybuy
ASUS ZenWiFi BD4 mesh Wi-Fi system

ASUS ZenWiFi BD4

A good fit if you want to use mesh points and are considering a wired backhaul option.

The product description lists Wi-Fi 7 (802.11be), dual-band Wi-Fi (2,4 GHz/5 GHz), two 2,5 Gbps Ethernet ports and a wired backhaul option.

Joybuy
TP-Link TL-WPA7517 KIT powerline starter kit

TP-Link TL-WPA7517 KIT powerline starter kit

A good fit for a loft where a wireless route is tricky, provided the connection works well over the electrical wiring you plan to use.

The product description lists a powerline Wi-Fi extender kit and a Type E plug.

Joybuy
TP-Link Deco M4 3-pack

TP-Link Deco M4 3-pack

A good fit if you want to use multiple stations to extend your Wi-Fi coverage.

The product description lists dual-band Wi-Fi (2,4 GHz/5 GHz), Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.

Joybuy

Frequently asked questions

How can you tell whether a Wi-Fi extender could help with your portfolio upload?

First, compare the upload speed using an Ethernet cable at the router with the speed over Wi-Fi in the loft. If the wired upload is slow too, look into your internet connection. An extra Wi-Fi point won’t increase the upload speed included in your broadband package. The Consumers’ Association describes measuring over a wired connection as a way to assess your connection.

Where should you place a wireless extender?

Place the extender somewhere in between where it can still receive a usable signal. The Consumers’ Association recommends keeping obstacles between Wi-Fi points to a minimum. A placement light or app can help you find a suitable spot.

How can you check whether powerline will work in your loft?

Test the connection using the sockets you plan to use, then measure the upload speed in the loft. According to devolo, certain sockets and sources of electrical interference can affect performance over your electrical wiring.

What CE requirements apply to a Wi-Fi extender sold in the Netherlands?

A Wi-Fi extender must meet the applicable requirements for radio equipment, including CE marking. The Dutch Authority for Digital Infrastructure states that retailers in the Netherlands may only sell equipment that meets the applicable requirements. Check the marking on the specific device and, if in doubt, ask the seller for information about its compliance.