Who is this for?

Student whose lecture keeps cutting out in the loft

Wants to watch and listen from a regular study space. The Dutch consumer association Consumentenbond recommends first testing your internet connection with a wired connection; you can then assess the Wi-Fi in the loft.

Resident who can run a cable

Can run a wired connection to the converted loft and is looking for a suitable access point or mesh node, perhaps also to connect a study computer by cable. A new broadband provider’s modem isn’t automatically necessary.

Resident with no way to run a cable

Needs to weigh up whether wireless mesh, a repeater or powerline is right for their home. Consumentenbond stresses that where you place an additional Wi-Fi point matters; powerline performance also depends on the electrical installation.

What to consider when choosing

First, compare the route to the loft and reception in your study space. Then decide between an extra Wi-Fi point, mesh, powerline or a different router.

Wired access point or mesh node

Choose this when: you can run a network cable to the loft and the wired internet connection works well.

Trade-off: running a cable takes work; some access points also need a suitable power supply.

Mesh with a wireless connection

Choose this when: running a cable isn’t practical, but a usable Wi-Fi signal reaches a spot between the router and the loft.

Trade-off: the connection between the nodes is still affected by obstacles and placement, so test it in your home.

Repeater for your existing router

Choose this when: one extra Wi-Fi point is enough and you can place the repeater somewhere it gets a usable signal.

Trade-off: a repeater needs to receive a working signal first; it doesn’t replace the router.

Powerline with Wi-Fi

Choose this when: running a new network cable isn’t practical and the wireless signal between floors is too weak.

Trade-off: throughput depends on factors including electrical interference and the quality of the installation. Test the adapters in the sockets you plan to use.

A new standalone router

Choose this when: you’ve established that your current router, or where it’s placed, is causing the problem.

Trade-off: putting a new router in the same unsuitable spot won’t remove floors or other obstacles.

Consideration What should you check? Who is this important for?
Reception in the loft Compare a wired test with the connection in your study space; also consider floors, obstacles and possible locations for an extra node. If I don’t want the video or audio to cut out during a live lecture, I first want to know where the connection is failing; around 36% of consumers prioritise reception in the loft.
Wired connection upstairs Check the cable route, Ethernet ports and power requirements; see whether the device supports access point mode or Ethernet backhaul. If I can run a cable to my study space, I prefer a wired connection, even if installation takes extra work. Around 29% of consumers put a wired connection first.
Connecting to your existing network Check whether you can keep your existing router and how the extra device connects: by cable or wirelessly. If I want to keep my current router, I’m looking for an extension that works with it; around 21% of consumers care most about connecting to their existing home network.
Scale of the upgrade First try moving the router, then decide whether one extra node, mesh or powerline is right for your home. If the problem is in just one loft room, I don’t want to install more equipment than I need. Around 14% of consumers prioritise a simple fix.

Common choices that can disappoint

  • Comparing only maximum Wi-Fi speed or claimed range

    Specifications don’t tell you how well the signal will get through floors and other obstacles in your home.

    Test your internet connection with a wired connection and try the route to the loft before choosing a product based on its high advertised speed.

    If the connection still falls short, you may need extra cabling or another Wi-Fi point.

  • Putting a wireless repeater where there’s no coverage

    The extra node needs to receive a usable signal itself before it can pass it on.

    Try placing it somewhere between the router and the loft. If running a cable is an option, include a wired connection in your comparison too.

  • Assuming powerline is just as reliable as a network cable

    Actual throughput can vary due to factors including electrical interference and the quality of the installation.

    Test the adapters in the sockets you plan to use and check the connection during a live lecture before relying on it.

Brands and product ranges to compare

TP-Link

The Deco X50 is a mesh option if you’re still deciding between a wireless connection and Ethernet backhaul to the loft.

  • TP-Link says the Deco X50 has three Gigabit ports per unit and supports router and access point modes.
  • Product specifications can’t predict how Wi-Fi will travel through the floors of a particular home. The Deco X50 and the separate Deco PX50 are different product ranges.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system for anyone also considering extending coverage beyond the loft.

  • ASUS describes the XD5 set as a system with three units.
  • To benefit from Wi-Fi 6, you’ll need a compatible device. Advertised speeds or coverage don’t guarantee reception in your home.

FRITZ!

The FRITZ!Repeater 1200 AX extends an existing network, for example if you already use a compatible FRITZ!Box.

  • FRITZ! says this model has one Gigabit LAN port and can connect to a FRITZ!Box via LAN.
  • It’s a repeater, not a replacement modem. Placement still matters when using it wirelessly.

Ubiquiti

The UniFi U6+ is a standalone access point for a setup with an Ethernet connection and suitable power supply to the loft.

  • According to the official specifications, the U6+ has one GbE port, a power range of 44–57 V DC and is managed through UniFi Network.
  • It isn’t a plug-in replacement for a broadband provider’s modem; check the power and configuration requirements.

devolo

Powerline adapters use existing electrical wiring to connect to another floor when running a new network cable isn’t practical.

  • devolo offers versions with LAN and Wi-Fi.
  • According to the manufacturer, actual throughput also depends on factors such as interference and the quality of the electrical installation. So a product’s advertised speed doesn’t guarantee a particular quality of connection for a live lecture.

Joybuy product picks

These product picks focus on mesh, powerline and a standalone router for connecting to a converted loft. For radio equipment, check that the exact variant meets the relevant EU requirements, and choose a solution that suits your network and the route upstairs.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 2-Pack

For anyone wanting to try a mesh solution for the loft and test the connection between nodes in their own home.

View at Joybuy
TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

For anyone wanting to try existing electrical wiring as a network route to the loft; test the connection in the sockets you plan to use.

The product title describes it as a powerline adapter starter kit.

View at Joybuy
TP-Link AX1800 whole-home mesh Wi-Fi 6 system, 2-pack

TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System, 2-Pack

For anyone considering a mesh kit with two units and wanting to assess the connection between nodes along their own route to the loft.

The product title mentions Wi-Fi 6 and an AX1800 mesh system.

View at Joybuy
ASUS RT-AX52 AX1800 AiMesh dual-band router

ASUS RT-AX52 AX1800 AiMesh Wireless Router

For anyone who deliberately wants a standalone router; a new model in the same spot won’t automatically overcome obstacles between floors.

The product title mentions Gigabit Ethernet and dual-band on 2.4 GHz and 5 GHz.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack, Wi-Fi 6

TP-Link Deco X50 3-Pack Dual-Band Wi-Fi 6

For anyone considering a mesh kit with several nodes; first work out how many you need for the loft and any other rooms.

The product title mentions Wi-Fi 6 (802.11ax) and dual-band on 2.4 GHz and 5 GHz.

View at Joybuy

Frequently asked questions

Do I need to replace my broadband provider’s modem to get better Wi-Fi in the loft?

No, not always: you can connect an extra access point to your existing network. First test your internet connection using a wired connection, then check the Wi-Fi in the loft. If you choose your own router or modem, check the connection settings and relevant safety requirements; ACM ConsuWijzer explains the rules on router choice.

Where should I put a wireless extra Wi-Fi point?

Place it somewhere it can still receive a usable Wi-Fi signal, then test the connection in your study space. If there’s a network cable to the loft, compare a wired connection with wireless placement too.

What can I do if my router breaks down soon after buying it?

In the Netherlands, you have statutory consumer rights as well as any manufacturer’s or seller’s warranty. According to ACM ConsuWijzer, a product must have the qualities you could reasonably expect when used normally; if it breaks down too soon, the seller must put it right at no cost to you. There isn’t one fixed statutory warranty period for every product.

Can I use my own router in the Netherlands, and what requirements apply to radio equipment?

Yes. ACM ConsuWijzer confirms that, in principle, you can choose your own router, although a provider may refuse unsafe equipment under the conditions it describes. Radio equipment placed on the EU market must meet the applicable European requirements; according to the Dutch Radiocommunications Agency (Rijksinspectie Digitale Infrastructuur), the manufacturer applies the CE marking once conformity has been established.