Start by looking at the connection between your router and the loft. If you have, or can install, an Ethernet cable, a wired access point could suit a permanent workspace where you share project files. Without a cable, a repeater may help if it can still receive a strong enough signal from the router. For several rooms, you could consider a compatible mesh system, while powerline is another option to test with the sockets you plan to use. Also check that the devices sharing files can communicate with each other on your local network.
Which solution is right for you?
A permanent loft workspace with large files
Do you regularly work with files on another device in your home, and could you run a network cable upstairs? Compare a wired access point with a wireless repeater for the connection between floors. TP-Link describes the RE705X as supporting wired access point mode.
One loft room with a weak signal and no cable
Do you mainly need to get a signal to one spot in the loft, but can’t run an Ethernet cable? Find a place for the repeater where it can still receive a usable signal from the router. The Consumers’ Association and TP-Link’s manual both stress the importance of placement and reception.
Several rooms with patchy coverage
If you use devices on different floors, first work out which rooms need extra coverage and check that the Wi-Fi points will work with your router. TP-Link and FRITZ! mesh features require compatible equipment.
What should you consider when choosing?
Wireless Wi-Fi repeater
Choose this option: if you want to improve coverage in one weak spot, can’t run a cable and have an intermediate location where the router signal is still usable.
Bear in mind: the repeater still relies on its wireless connection to the router. Placing it somewhere with a weak signal won’t solve the problem.
Ethernet access point
Choose this option: if you have, or can install, a network cable to the loft and use a permanent workspace there.
Bear in mind: you’ll need to run a cable and check that the access point supports the wired mode you want, while leaving enough ports for your other devices.
Mesh system with multiple Wi-Fi points
Choose this option: if rooms beyond the loft also need better coverage and the points will work with your router or as a standalone system.
Bear in mind: adding points means adding more equipment. A point connected wirelessly still relies on its connection to the rest of the network.
Powerline with Wi-Fi in the loft
Choose this option: if running a cable isn’t practical, the wireless connection between floors is too weak and you can test the solution with the sockets you plan to use.
Bear in mind: data travels through your electrical wiring. Certain sockets and electrical appliances can affect the connection.
| Concern |
What should you check? |
Which consumers? |
| Local file transfers |
Check whether you can run Ethernet to the loft, whether the device has access point mode and whether you’ll have a port left for your work computer. |
If I regularly share large project files between devices at home, I want to know whether the connection to the loft is suitable for my permanent workspace. Around 36% of consumers say local file transfers are their main concern. |
| Coverage in one loft room |
Place the repeater where it can still receive a good signal from the router, then test the connection at your workspace. |
If I have a weak signal only in the loft and can’t run a cable, I need to find a spot where the repeater can still receive the router’s signal. Around 29% of consumers prioritise this concern. |
| Coverage in several rooms |
Work out which rooms need coverage and check whether the mesh feature works with your router. |
If other rooms have problems too, I want to know whether extra Wi-Fi points will work with my existing network. Around 21% of consumers put coverage in several rooms first. |
| Access to shared files |
Test whether the devices in question can communicate locally, guests remain separated and security updates are available. |
When I share project files, I want the right devices to have access without leaving my network unnecessarily open. Around 14% of consumers make access management their main buying concern. |
For the exact model, also check the applicable CE marking and any RED 3.3 requirements. The Netherlands Authority for Digital Infrastructure says that the applicable cybersecurity requirements depend on the type of radio equipment.
Common buying mistakes
-
Assuming the advertised Wi-Fi speed equals your file transfer speed
A stated radio speed doesn’t measure the connection between your devices in the loft.
Once it’s installed, test with a representative project file between the devices you actually use.
-
Putting the repeater in the dead zone
A repeater needs to receive a usable connection from the router itself. The TP-Link RE705X manual says a red signal light indicates weak reception.
Find an intermediate spot with a stronger router signal and test the connection there.
-
Assuming file sharing will work on every network
TP-Link explains that AP isolation can prevent devices from sharing files directly. The Consumers’ Association points out that shared files and devices need protection against unwanted access.
Test access between the devices in question, and don’t give guests unrestricted access to project files.
-
Choosing powerline or mesh without checking what they depend on
Devolo says that Magic adapters don’t work with the older dLAN range, and that electrical interference can affect powerline connections. Brand-specific mesh features also require compatible equipment.
Check your existing equipment and test the connection you plan to use before expanding your network.
Brands worth considering
TP-Link
The RE705X is an example of a standalone Wi-Fi 6 repeater that can also work as a wired access point.
- TP-Link says the RE705X has a Gigabit Ethernet port and access point mode.
- OneMesh requires a compatible router. The stated radio speeds aren’t measurements of file transfers in your loft.
FRITZ!
The FRITZ!Repeater 1200 AX is worth considering if you want to extend an existing FRITZ!Box network. The manufacturer says it can also be used with other routers.
- FRITZ! lists a Gigabit LAN port and the option to connect the device to a FRITZ!Box via LAN.
- The FRITZ! Mesh features described aren’t automatically compatible with routers from other brands.
devolo
Magic 2 WiFi next offers a powerline option when Wi-Fi struggles to get through the floor between levels and running a cable isn’t practical.
- According to devolo, the Wi-Fi adapter has two Gigabit LAN ports.
- Magic doesn’t work with dLAN. Devolo also says that certain sockets and electrical appliances can affect the connection, so test it at home.
ASUS
The RP-AX58 is a repeater option if you’re also considering an ASUS AiMesh setup.
- According to ASUS, this model supports AiMesh with a compatible router, as well as access point mode.
- ASUS says 160 MHz support can vary by region, and that you need compatible devices to benefit from Wi-Fi 6.
Joybuy products for loft Wi-Fi
This selection includes mesh systems for several rooms, a standalone wireless repeater and access points for an Ethernet connection. For the exact model, check the applicable CE marking and any RED 3.3 requirements. The Netherlands Authority for Digital Infrastructure says that applicability depends on the type of radio equipment.
No image available
TP-Link Deco X50 (3-pack)
A mesh system with three units for extending Wi-Fi to several rooms in your home.
Dual-band Wi-Fi 6; the product information lists three Gigabit Ethernet ports per unit. Check that the ports suit your wired devices.
View at Joybuy
No image available
Wifi Repeater Pro Black
A wireless repeater for improving coverage in one weak spot when you don’t have an Ethernet connection upstairs.
The product description lists 2.4 GHz only and a speed of up to 300 Mbps. The repeater still relies on the signal it receives where you place it.
View at Joybuy
No image available
TP-Link Omada EAP653
A wired access point for a loft with an Ethernet connection to your existing network.
Wi-Fi 6, a Gigabit Ethernet port and PoE support are listed. The product description says it can be mounted on a ceiling or wall.
View at Joybuy
No image available
TP-Link Deco XE75
A mesh system with three units for extending Wi-Fi to several rooms.
Tri-band Wi-Fi 6E with 2.4 GHz, 5 GHz and 6 GHz bands; the product information lists three Gigabit Ethernet ports per unit. Check that your devices and network support the features you want.
View at Joybuy
No image available
TP-Link TL-WA801N
An access point or Wi-Fi extender for anyone looking for one of these network extension modes.
The product information lists 2.4 GHz, passive PoE and 10/100 Mbit/s Ethernet ports. Bear this stated Ethernet limit in mind when transferring files.
View at Joybuy
Frequently asked questions
Can I automatically share project files with devices downstairs using a repeater?
No, not automatically. The devices must be able to communicate with each other on the local network. TP-Link says that enabling AP or client isolation can block direct file sharing; make sure your network is also protected against unwanted access.
Where should I put a wireless repeater?
Place it somewhere it can still receive a good signal from the router, rather than halfway into the dead zone. The TP-Link RE705X manual says a red signal light indicates weak reception and advises moving the repeater closer to the router.
Does an Ethernet port make every repeater a wired access point?
No, it depends on what the port does and which modes the model supports. On the TP-Link RE705X, the Ethernet port connects to the router by cable in access point mode; in repeater mode, it can be used for a wired end device.
Will powerline work at the same speed in every loft?
There’s no guarantee. Devolo says that certain sockets can limit the connection and electrical appliances can cause interference. Test the sockets you plan to use with a representative file transfer.
What are the Dutch requirements for a Wi-Fi booster?
Radio equipment placed on the market in the Netherlands must meet the applicable European radio requirements and carry the correct CE marking. The Netherlands Authority for Digital Infrastructure says that, since 1 August 2025, applicable RED 3.3 cybersecurity requirements also apply to internet-connected radio equipment. The requirements that apply depend on the device.