Who should consider this choice?

Readers with a Wi-Fi dead spot

If walls, a floor or metal features make it difficult to get a signal where you read, the position of your Wi-Fi points and the connection between them matter. TP-Link notes that obstacles like these can interfere with wireless signals.

Readers who want reliable downloads

If you want to download digital magazines while other devices are using your home network, don’t just look at the advertised Wi-Fi speed. Check the connection where you’ll actually be reading, too.

Readers with an existing provider router

If you want to keep your existing internet connection, check which connection method and mode are right for you. For example, you could use an access point behind your provider’s router or connect your own router.

What should you look for when choosing?

A standalone router

When to choose it: if one well-positioned Wi-Fi point can reach your reading spots and you don’t need a second coverage zone. ASUS lists router and access point modes for the RT-AX58U.

The trade-off: one device avoids having to connect additional stations, but the advertised wireless speed won’t tell you whether the signal can get through the walls and floors of your loft.

Mesh with a wireless connection

When to choose it: if one point isn’t enough and you can’t run a cable between the locations you want to cover. Position additional stations where they can still connect reliably to the main point.

The trade-off: the stations rely on their wireless connection. In a 2024 Tweakers test, clients connected to more distant wireless Deco X50 satellites performed less well. This result applies to the setup that was tested.

A wired access point or mesh system

When to choose it: if you have, or can run, a suitable network cable between your internet setup and a distant reading spot. TP-Link and ASUS describe ethernet backhaul for their respective systems.

The trade-off: you’ll need a suitable cable route and connection. Follow the instructions for router or access point mode for your chosen system.

What to consider What should you check? Who is this important for?
Coverage where you read Check the signal where you read. If you’re adding stations, check their connection to the main point, too. If I read somewhere behind walls or a floor, I want reliable coverage there first. Around 36% of consumers prioritise coverage where they read.
Download reliability Check the connection where you use your devices and allow for other devices on the network. An advertised wireless speed doesn’t guarantee a particular download speed. When downloading, I want a connection that remains usable while other devices are on the network. Around 29% of consumers prioritise reliable downloads.
Connecting to your provider’s equipment Decide whether to keep your provider’s router or connect your own, then check the appropriate mode and connection instructions. If I want to keep my existing equipment, I want to know in advance how a router or access point will connect to it. Around 21% of consumers prioritise connectivity and setup.
Updates and features Check how your chosen model receives updates and which security features are available as standard. If I use my own router, I want to know how updates are managed and which features I can use. Around 14% of consumers prioritise updates and available features.

Pitfalls to avoid when buying

  • Taking an advertised coverage area as guaranteed coverage

    Walls, floors, metal features and the position of your devices can all affect the signal where you read. So a coverage claim alone won’t tell you what reception you’ll get in your loft.

    Check the signal where you read before deciding how many Wi-Fi points you need.

  • Putting a wireless mesh station in an existing dead spot

    An additional station also needs a usable connection to the main point. According to Tweakers, performance fell off on more distant wireless satellites in its Deco X50 test setup.

    Check the connection between the stations and consider ethernet backhaul if there’s a suitable cable route.

    Running a cable or repositioning stations may involve extra installation work.

  • Assuming all software features are available as standard

    The Deco X50 manual distinguishes between a HomeShield Basic plan and a Pro plan. This applies to this model and doesn’t show how features are provided on other systems.

    Check which features are included as standard for each model and what conditions apply to additional features.

Brands to consider

TP-Link

The Deco X50 range is worth considering if you’re looking at multiple Wi-Fi points or ethernet backhaul. Choose the model and number of stations to suit your layout.

  • TP-Link specifies three Gigabit ports per Deco X50 unit, with optional ethernet backhaul.
  • In a Dutch Tweakers test, clients connected to more distant wireless X50 satellites performed less well. This applies to the setup that was tested.

ASUS

The standalone RT-AX58U and the ZenWiFi XD5 mesh system offer examples of a router setup and a setup with multiple Wi-Fi points.

  • ASUS lists router and access point modes for the RT-AX58U, and ethernet backhaul for the XD5.
  • ASUS coverage and speed claims aren’t measurements taken at the reading spots in your loft.

FRITZ!

A FRITZ! Mesh system is another option to compare if you’re looking for multiple Wi-Fi points and a range of settings.

  • Tweakers described the FRITZ! Mesh system it tested as an alternative with more extensive settings than the Deco X50 it tested.
  • That comparison applies to the models and setup tested, not all FRITZ! models or an unknown loft layout.

NETGEAR

The Orbi RBK762 is a tri-band mesh alternative to compare if the router and satellite need to connect wirelessly.

  • NETGEAR describes the RBK762 as a tri-band Wi-Fi 6 system.
  • The model name alone won’t tell you whether its coverage will suit the obstacles and layout of your loft.

Joybuy products for these setups

This selection includes mesh systems, a router and a hybrid mesh solution using Powerline over your existing electrical wiring. Before buying, make sure the version on offer bears the required CE marking and meets the applicable requirements.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A two-unit mesh system for a setup with multiple Wi-Fi points.

Tri-band Wi-Fi 7; wired and wireless backhaul.

Joybuy
TP-Link Deco PX10

TP-Link Deco PX10

A mesh setup that uses Powerline over your existing electrical wiring as one possible way to extend Wi-Fi.

Dual-band (2.4 GHz / 5 GHz), Wi-Fi 6 and Gigabit ethernet ports on each unit. The Powerline connection uses your existing electrical wiring.

Joybuy
ASUS ZenWiFi BD4

ASUS ZenWiFi BD4

A mesh system to consider if you’re planning to use multiple Wi-Fi points.

Dual-band (2.4 GHz / 5 GHz), Wi-Fi 7 and two 2.5 Gigabit ethernet ports. A wired backhaul option is listed.

Joybuy
ASUS RT-AX52 AX1800

ASUS RT-AX52 AX1800

A standalone router to consider if one centrally positioned Wi-Fi point is enough.

Wi-Fi 6, three Gigabit ethernet ports and AiMesh compatibility.

Joybuy
TP-Link Deco X50 (3-pack)

TP-Link Deco X50 (3-pack)

A three-unit mesh system to consider if you need multiple Wi-Fi points.

Dual-band Wi-Fi 6 and three Gigabit ports per unit; ethernet backhaul is optional.

Joybuy

Frequently asked questions

Can I use my own router in the Netherlands?

Yes. ACM ConsuWijzer explains your freedom to choose a router. Check the connection requirements and, if needed, ask your provider for the settings you’ll need. Using an access point behind your existing router is different from replacing that router.

Where should I put an additional wireless Wi-Fi point?

Don’t put it in a spot where the signal has already almost disappeared: the point itself needs a usable connection to the main point. TP-Link recommends placing Deco stations away from walls, floors and metal objects. Try a few different positions to see what works in your loft.

Do I need to update my router myself?

Check how your chosen model receives updates. VeiligInternetten recommends keeping your router up to date and explains that updates for your own equipment are available through the supplier’s app or website. The same guidance says that providers usually update equipment they supply.

Are all the security features of a mesh system available as standard?

Not always. The TP-Link Deco X50 manual distinguishes between a HomeShield Basic plan and a Pro plan. Check which features are available and what conditions apply for each model. This example doesn’t tell you anything about other systems.

What requirements apply to Wi-Fi routers sold in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, radio equipment must meet the applicable European requirements and bear the required CE marking. The authority also states that additional cyber security requirements apply to relevant radio equipment from 1 August 2025. Check the version on offer; an old model declaration doesn’t automatically confirm that every individual unit complies.