Who is this Wi-Fi advice for?

Student with weak Wi-Fi in the loft

You take your lesson in the loft while your provider’s router is elsewhere, and want to know whether you need an extra Wi-Fi access point closer to where you study.

Student with a loft that can be wired

You can run a network cable to your converted loft and want Wi-Fi there without relying on a wireless connection between floors.

Student with coverage that’s already good enough

You usually have Wi-Fi where you take your lesson and want to investigate dropouts before buying extra networking equipment.

What should you look for in Wi-Fi for an online lesson in the loft?

Keep your existing router

This may suit you if: after testing and possibly moving your equipment, the connection in the loft is already good enough.

Bear in mind: a more powerful router downstairs doesn’t guarantee that its signal will reach through the loft floor.

Wired access point or extra Wi-Fi access point

This may suit you if: there’s a network cable running to the loft, or you can install one.

Bear in mind: the cable route, an available connection and possibly a suitable power supply for the access point.

Wireless mesh or an extra Wi-Fi access point

This may suit you if: cabling isn’t possible and there’s still a strong enough Wi-Fi signal in a suitable spot between the router and the loft.

Bear in mind: the connection between access points still depends on where they’re placed and any obstacles in the way.

Start by considering coverage, connection stability during lessons and compatibility with your existing equipment. These factors will help you choose the right solution for your setup.

Priority What should you check before buying? Who is this most important for?
Coverage in the loft Test Wi-Fi where you take your lesson and check whether there’s room for an extra access point or a wired connection. If my router is downstairs, I want to know whether Wi-Fi reaches where I take my lesson before replacing any equipment. Around 36% of consumers prioritise coverage in the loft.
Stable audio and video Test where you take your lesson while doing something similar to your usual online activity. Check upload and download speeds if you’re sending video yourself. During a live lesson, I want to avoid losing audio or video, especially when I’m using my camera. Around 29% of consumers prioritise a stable connection during lessons.
Compatibility with existing equipment Check which Ethernet ports are available and whether your chosen equipment can work in access point mode with your current setup. If I want to keep my provider’s router, any new equipment needs to connect to it and work with the cabling already in place. Around 21% of consumers focus mainly on compatibility.
Requirements and maintenance Check how many access points you need, which cables and power supplies are required, and whether firmware updates are available. I want to know in advance what installation and ongoing maintenance involve, such as whether I’ll need an extra cable or power supply. Around 14% of consumers prioritise requirements and maintenance.

Pitfalls when buying Wi-Fi equipment for the loft

  • Assuming a higher Wi-Fi speed means better coverage

    A higher advertised Wi-Fi speed doesn’t guarantee that the signal will reach the loft through floors and ceilings. Distance and obstacles still matter.

    Test your connection using a cable at the router, then test Wi-Fi where you take your lesson before choosing a solution.

  • Placing a wireless mesh node where the Wi-Fi signal has already dropped out

    The connection between access points also needs to be good enough. An access point placed somewhere with no coverage won’t have a good wireless connection to the rest of the network.

    Test a spot between the router and the loft, or find out whether you can run a network cable to the loft.

  • Assuming every mesh system comes with the same components

    The number of access points, connections and power options varies between models and affects the setup you can create.

    Before buying, check the exact model, pack size, ports and power requirements.

Brands and product ranges to consider

TP-Link

The Archer AX55 is a standalone router; the Deco X50 is a mesh option for those who want to build a network with multiple access points.

  • TP-Link lists three gigabit ports per Deco X50 unit and optional Ethernet backhaul for Deco units connected by cable.
  • The stated AX3000 speed is a manufacturer specification, not a measurement taken in a Dutch loft. Check the model and its compatibility with your existing router.

FRITZ!

The FRITZ!Repeater 1200 AX is an extra Wi-Fi access point for an existing setup.

  • FRITZ! documents a LAN bridge for this model.
  • Integration with FRITZ! Mesh requires a FRITZ!Box running FRITZ!OS 7 or later. The repeater isn’t a replacement internet router on its own.

ASUS

ZenWiFi XD5 is a mesh alternative for connecting several areas of your home.

  • ASUS describes an XD5 three-unit set and documents wired AiMesh backhaul and access point mode.
  • Check the exact model and what’s included in the set before choosing.

Ubiquiti

The UniFi U6+ is a wired access point for a setup with a network cable running to the loft.

  • Ubiquiti specifies one gigabit Ethernet port.
  • This access point doesn’t replace a complete internet router. Check the power requirements and management setup too.

Joybuy products for routers, mesh and wired access points

These products cover three possible options: use a single router, extend Wi-Fi with mesh, or connect an access point by cable.

ASUS ZenWiFi BD4 dual-band Wi-Fi 7

ASUS ZenWiFi BD4, Wi-Fi 7

Worth considering if you want to use mesh and have the option of a wired connection between access points.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 7 (802.11be).

View at Joybuy
ASUS RT-AX52 AX1800 dual-band router

ASUS RT-AX52 AX1800

Worth considering if a single router in a suitable position can provide enough coverage where you take your lesson. Check that any extension you want to add will work with your setup.

Dual-band: 2.4 GHz and 5 GHz. The product name lists AiMesh and Gigabit Ethernet.

View at Joybuy
TP-Link Omada EAP653 access point

TP-Link Omada EAP653

Suitable for a wired setup if there’s a network cable running to where the access point will go, or you can install one.

Wi-Fi 6. The product name lists 2976 Mbit/s and Power over Ethernet (PoE).

View at Joybuy
TP-Link Deco X50-POE mesh system with two units

TP-Link Deco X50-POE (2-pack)

Worth considering if you want to use a two-unit mesh system and power over Ethernet suits your setup.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax).

View at Joybuy
TP-Link Deco X50 mesh system with two units

TP-Link Deco X50 (2-pack)

Worth considering if you want to extend Wi-Fi with two mesh units. Wired Ethernet backhaul is an option if the units are connected by cable.

Dual-band: 2.4 GHz and 5 GHz. Wi-Fi 6 (802.11ax). TP-Link lists three gigabit ports per unit.

View at Joybuy

Frequently asked questions

How can you tell whether the router or internet connection is disrupting your lesson?

Compare a test using a network cable at the router with a Wi-Fi test where you take your lesson. If the wired connection is repeatedly too slow as well, first investigate your internet connection or contact your provider. If it’s mainly the Wi-Fi in the loft that’s weak, look at repositioning your equipment or adding another Wi-Fi access point.

Where should you place an extra wireless Wi-Fi access point?

Choose a spot where the access point itself still has a good enough connection to the rest of the network. An access point placed somewhere with no reception can’t make a good wireless connection to the rest of the network. If there’s a cable running to the loft, you can connect the access point there by cable.

Can you use your own router in the Netherlands?

Yes. ACM ConsuWijzer confirms that consumers can choose their own router. A provider may refuse an unsafe device. If necessary, ask for the connection settings and check that the device is compatible with your connection.

What regulatory check is important when buying a Wi-Fi router?

Check that the specific model carries the required CE marking. The Dutch Authority for Digital Infrastructure states that this marking is mandatory for radio equipment. A model name alone doesn’t confirm that the version you’re buying meets the requirement.

What installation and maintenance details should you check in advance?

Check whether you’ll need a cable, an additional power supply or another Wi-Fi access point, and which features are included with the model you’ve chosen. Keep your equipment up to date: ACM ConsuWijzer highlights the importance of updates for network security and personal data.