Who is this choice relevant to?

Photo uploader with weak Wi-Fi in the loft

Your internet connection seems fine downstairs, but the signal is weak in your converted loft. You want to know whether an extra Wi-Fi access point, ideally connected via an existing cable, would suit you better than a new router.

Photo uploader with slow uploads everywhere

You want to check first whether your internet connection is the bottleneck before buying Wi-Fi equipment.

Extending an existing home network

You want to keep your current router and find out whether an access point, standard repeater or mesh extender will work with your equipment.

What should you look for when choosing?

First, work out whether the limitation is your internet connection or the Wi-Fi in the loft. Then choose between a wired or wireless extension, or a mesh system, based on your cabling options and whether you want to keep your existing router.

Check your internet connection first

Choose this if: a wired speed test by the router is also disappointing.

Bear in mind: a Wi-Fi system won’t increase the upload speed provided by your internet connection.

Wired access point or mesh point

Choose this if: your wired upload speed is good downstairs and there’s a usable Ethernet cable running to the loft.

Bear in mind: running the cable and setting it up take work; check which operating modes the device supports.

Wireless repeater or mesh extender

Choose this if: running a cable isn’t practical and there’s still a usable connection to the router where you plan to put the extra Wi-Fi point.

Bear in mind: the wireless connection between floors remains the deciding factor.

A complete mesh system

Choose this if: you need Wi-Fi points in several places and want to replace your existing Wi-Fi setup.

Bear in mind: you’ll need to decide how many nodes you need and how they’ll connect to each other.

What to consider What to look for when buying Who should prioritise this?
Wi-Fi coverage in the loft Compare the connection downstairs with the one in the loft. Check whether there’s a usable Ethernet cable and whether the device supports wired backhaul or access point mode. If the Wi-Fi works well downstairs but is weak in the loft, I mainly want to know how to get coverage up there. An estimated 40% of consumers say loft coverage is their main reason for buying.
Upload speed First test with a wired computer, then test in the loft. Compare the wired result with the upload speed in your internet contract. I want to know whether the internet connection itself is slowing down uploads before I buy Wi-Fi equipment. Around 30% of consumers say upload performance is their main reason for buying.
Compatibility with your router Make a note of your current router’s model. Check whether your chosen devices can work as an access point, repeater or mesh node. If I want to keep my router, I need an extender that works with my existing equipment. An estimated 20% of consumers say compatibility with their existing network is their main reason for buying.
Updates and management Check how to update the exact model you’re considering, and decide who will manage the main router if you keep your provider’s equipment. I want to know who maintains my network equipment and how updates are handled. Around 10% of consumers say management and security are their main reasons for buying.

Common pitfalls

  • Assuming a high Wi-Fi speed guarantees faster photo uploads

    Your internet speed and your home’s wireless connection are two different parts of the overall connection. A high stated Wi-Fi speed doesn’t tell you what upload speed your internet connection provides.

    First, test with a wired computer, then compare the result with a test in the loft.

  • Putting a wireless repeater somewhere with no usable signal

    A repeater can only extend the connection it can make to the existing router.

    Check the connection where you plan to put it. If it’s still weak, see whether running a cable or moving the Wi-Fi point is an option.

  • Assuming a LAN port or the word ‘mesh’ proves compatibility

    A LAN port may serve a different purpose from a connection for wired backhaul. Standard repeater mode is also not the same as full mesh integration.

    Check how the exact models connect and which operating modes they support.

Brands to consider

TP-Link

The Deco X50 is a Wi-Fi 6 mesh system designed for setups with several Wi-Fi points.

  • TP-Link lists three gigabit ports per unit for the Deco X50, plus optional Ethernet backhaul.
  • Check the exact version: X50, X50-PoE and X50-5G are different model names. The stated coverage doesn’t guarantee the range you’ll get in your loft.

FRITZ!

The FRITZ!Repeater 1200 AX is an extender for improving coverage in one area, including as part of an existing FRITZ! network.

  • FRITZ! lists a gigabit LAN port and repeater mode with other routers.
  • Check whether you want to connect the repeater wirelessly or use it as a wired access point. Standard repeater mode isn’t the same as full FRITZ! Mesh integration.

ASUS

The ZenWiFi BT8 is a tri-band Wi-Fi 7 mesh system for anyone considering a setup with several Wi-Fi points.

  • ASUS describes wired backhaul options for this system.
  • The product specifications aren’t a measurement of coverage in your loft. Also check whether a complete system and its associated equipment are suitable for your connection.

NETGEAR

Orbi 370 is a dual-band Wi-Fi 7 mesh range with kits for setting up several Wi-Fi points.

  • NETGEAR lists Enhanced Backhaul and 2.5 Gig connectivity for this product range.
  • Check the exact version and the connection between nodes; the Wi-Fi generation alone won’t tell you how well the setup will work in your loft.

Joybuy products for extending Wi-Fi

This selection includes an access point, a repeater and mesh systems for anyone looking to extend an existing network or use Wi-Fi points in several places.

TP-Link Deco X50 mesh kit with three units

TP-Link Deco X50 (3-pack)

Suitable for a setup with several Wi-Fi points, optionally with a wired connection between the units.

Wi-Fi 6; dual-band on 2.4 GHz and 5 GHz. The description lists three gigabit ports per unit and optional Ethernet backhaul.

View at Joybuy
Wi-Fi Repeater Pro in black

Wi-Fi Repeater Pro (black)

Suitable if you want to extend an existing wireless network and there’s still a usable connection to the router where you place the repeater.

The description lists 2.4 GHz and a stated maximum of 300 Mbps; this isn’t a guaranteed upload speed.

View at Joybuy
Linksys Velop Pro 7 mesh kit with two nodes

Linksys Velop Pro 7 (2-pack)

Suitable if you want to set up a mesh network with several points and have the option to add compatible nodes.

Tri-band Wi-Fi 7; the description lists two nodes and the option to expand with compatible Linksys Cognitive Mesh devices.

View at Joybuy
TP-Link Deco XE75 mesh kit with three units

TP-Link Deco XE75 (3-pack)

Suitable if you want to use a mesh setup with several Wi-Fi points and connect wired devices to the units.

Tri-band Wi-Fi 6E; the description lists three gigabit ports per node.

View at Joybuy
TP-Link Omada EAP613 wireless access point

TP-Link Omada EAP613 access point

Suitable for extending your network using an available Ethernet cable, provided access point mode works with your existing router.

Wi-Fi 6; the description lists PoE and DC power, wall or ceiling mounting, and a combined Wi-Fi speed of 1.775 Mbps. Suitable equipment is needed for mounting and powering the device; make sure the access point is securely fixed in place.

View at Joybuy

Frequently asked questions

Should I buy a new router straight away to upload faster from the loft?

No. First, measure your upload speed using a wired computer, then compare it with a measurement in the loft. If the upload speed is disappointing even when wired, compare the result with the upload speed in your contract. If it’s mainly the loft that’s slow, look into your Wi-Fi coverage.

Where should I put a wireless extender, and when should I use a cable?

A wireless repeater needs a usable connection to the main router where you place it. If there’s an Ethernet cable running to the loft, check whether an access point or mesh node with Ethernet backhaul will work with your system, and find out how to confirm that it’s using a wired connection.

Who handles updates, and what if a router breaks down too soon?

If you own your router, check how to update its firmware. Update management may work differently for equipment supplied by your provider. In the Netherlands, statutory guarantees apply alongside the seller’s guarantee. Check with the seller what options are available if a product doesn’t meet what you could reasonably expect from it.

Can I use my own router in the Netherlands instead of the one supplied by my internet provider?

According to ACM ConsuWijzer, you have the freedom to choose your router, but your own device won’t necessarily work in every situation without further setup. Before replacing your router, check which conditions and settings apply to your connection.