Who is this buying guide for?

Loft reader with one weak Wi-Fi spot

You want to download magazines in one place and can position a repeater where the existing signal is still usable.

Reader with an Ethernet cable to the loft

You can use a wired access point and don’t want to rely on a wireless connection back to the router.

Reader with a challenging ceiling to contend with

There’s barely any Wi-Fi in the loft and running a new network cable would be difficult; you want to see if powerline works over your existing electrical wiring.

What should you look for in loft Wi-Fi?

First, check the connection where you read and download; also make sure the specific model carries the required CE marking.

What to consider What should you check? Who is this important for?
Usable signal where you read and where you place the repeater Test reception at a possible midway point, then download something in the loft. If I want to fix one weak spot, I need to know whether the repeater itself can still connect to the router. Around 36% of consumers prioritise a connection that works in the specific area they need.
Signal through floors or thick walls Check that the powerline kit includes both an adapter for the router and a Wi-Fi adapter for the loft; test the connection using the sockets you plan to use. When the wireless signal struggles to get through the floor, I look for another route to the loft. Around 29% of consumers say this kind of difficult connection is their main concern.
Making good use of an available cable Check that the exact model has access point mode and an Ethernet port, and find out where the cable comes out. If I have Ethernet in the loft, I want to use that cable for Wi-Fi rather than rely on a wireless connection back to the router. Around 21% of consumers prioritise making use of a cable.
Avoiding unnecessary complexity or ongoing costs Decide whether you only need coverage in the loft or in other rooms too; consider installation, updates and energy use. If I mainly want to improve coverage in one place, I don’t want a more extensive system than my situation calls for. Around 14% of consumers prioritise simplicity and keeping costs down.

Common buying mistakes

  • Putting the repeater where reception is worst

    A repeater needs a usable connection to the router itself. If the Wi-Fi signal is almost gone, the repeater may not be able to connect properly either.

    Try a midway point, then test a download in the loft.

  • Mistaking a standalone powerline adapter for a complete starter kit

    A powerline connection needs one adapter by the router and another in the room you want to cover.

    Check everything included in the box and see whether you already have compatible powerline equipment.

  • Assuming general router compatibility means mesh compatibility

    A device may connect to a router without supporting its brand-specific mesh features.

    Check that both the router and the extender are compatible with the mesh feature you want to use.

  • Taking the stated Mbps figure as a guaranteed download speed

    Your actual connection in the loft also depends on placement and, with powerline, your electrical wiring.

    Test the connection with a download where you read your magazines.

Brands to compare

TP-Link

The RE705X is a Wi-Fi 6 repeater that can also be used as a wired access point.

  • TP-Link lists access point mode and a Gigabit port for the RE705X.
  • OneMesh requires a compatible OneMesh router; general router compatibility isn’t enough.

FRITZ!

The FRITZ!Repeater 1200 AX is a Wi-Fi 6 repeater that can work with a compatible FRITZ! Mesh home network.

  • FRITZ! lists one Gigabit LAN connection, regular updates and a five-year manufacturer’s warranty for this model.
  • The mesh functionality described is part of the FRITZ! ecosystem; the specifications aren’t a performance test in a loft.

ASUS

The RP-AX58 is a Wi-Fi 6 range extender; AiMesh is an option with a compatible ASUS router.

  • ASUS lists support for access point mode and compatibility with many other routers.
  • You’ll need compatible ASUS equipment to use AiMesh features.

devolo

The Magic 2 WiFi 6 next Starter Kit combines data transmission over your mains wiring with Wi-Fi.

  • According to devolo, the starter kit includes two adapters.
  • According to the manufacturer, actual powerline throughput also depends on interference and the quality of your electrical wiring; the stated Wi-Fi speed isn’t a guaranteed download speed.

Joybuy products for loft Wi-Fi

This selection includes a wired access point, a set of mesh Wi-Fi points, powerline Wi-Fi and wireless repeaters. Check that each specific model’s connection and features suit your router and loft, and check the CE marking before considering a product suitable to buy.

TP-Link Omada EAP653 access point

TP-Link Omada EAP653 Wireless Access Point

A wired access point for a loft with an available Ethernet connection.

The product name lists Power over Ethernet (PoE) and 2976 Mbit/s; check that the wired setup suits your needs.

View at Joybuy
TP-Link Deco X50 set with three nodes

TP-Link Deco X50 (3-Pack)

A set of three mesh nodes to consider if you want coverage in other rooms as well as the loft.

The product name lists dual-band Wi-Fi 6; bear in mind that extra Wi-Fi points also mean more equipment and power consumption.

View at Joybuy
TP-Link TL-WPA7517 KIT powerline starter kit

TP-Link TL-WPA7517 KIT Powerline Starter Kit

A powerline Wi-Fi kit for situations where the wireless signal struggles to get through the floor and running a cable is difficult.

With powerline, actual throughput also depends on interference and the quality of your electrical wiring; test the connection using the sockets you plan to use.

View at Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

A wireless repeater for extending an existing Wi-Fi network, provided you can position it somewhere with usable reception.

The product description lists 2.4 GHz up to 300 Mbps; test the connection where you read rather than relying solely on the stated wireless speed.

View at Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

This model is described as an access point or range extender; check which mode works with the connection available to your loft.

The product name lists 2.4 GHz 802.11n up to 300 Mbit/s, two antennas, WPS and Passive PoE.

View at Joybuy

Frequently asked questions

Do I need to buy Wi-Fi 7 straight away to download magazines?

Not necessarily: the Consumentenbond generally considers Wi-Fi 6 a suitable choice for many users. Your reading device needs to support Wi-Fi 6 to benefit from the specific advantages of that standard, so first check whether the loft connection is the problem.

How do I set up powerline Wi-Fi?

With a starter kit, connect one adapter to the router using a LAN cable and plug the Wi-Fi adapter in near the room you want to cover. Devolo advises against using adapters in a multi-socket extension alongside other devices if this results in a poor connection.

What should I check after installation?

Try a real download in the loft, check for updates regularly and use a strong Wi-Fi password. A high stated wireless speed doesn’t tell you how well the connection actually performs in that spot.

Do energy costs and the warranty matter when choosing?

Yes. The Consumentenbond points out that routers and Wi-Fi points are always switched on, and includes energy use in its tests. In the Netherlands, consumer law gives you the right to a product that meets reasonable expectations; any manufacturer’s warranty is in addition to, not a replacement for, this legal guarantee.

What product requirement should I check for wireless equipment in the Netherlands?

Wireless equipment placed on the market in the Netherlands must carry a CE marking. Check the marking and the identity of the specific model; the model name alone doesn’t confirm which version you’ll receive.