Who should consider these options?

Working from home in the loft

You mainly need a reliable connection at your workspace. Check whether you can run a cable, or whether there’s a suitable place for a Wi-Fi point that can still connect properly to your existing network. The Consumentenbond stresses the importance of choosing the right location.

Renter without a permanent installation

You’re looking for a solution you can move or remove. Consider the cable route and any alterations to the property separately; the Dutch government distinguishes between minor changes that can be reversed and renovation work.

Using an existing broadband provider’s router

You want to keep your current network and improve reception upstairs. Check which operating mode the additional device uses and where you could position an intermediate point. TP-Link describes an access point mode for Deco that leaves the existing router in charge of managing the network.

What should you look for when choosing?

Start by finding out where the problem lies: with the internet connection itself or with the Wi-Fi signal reaching the loft. Only then decide between moving the router, a wired connection, mesh or powerline.

If you’re choosing Wi-Fi for a loft workspace in a compact rented home, consider signal coverage, a stable connection for work, a suitable installation and how much extra equipment you’ll need.

Consideration What should you look for? Who is this most relevant to?
Signal in the loft Test your connection at your workspace and at possible locations for an intermediate point; if you’re considering mesh, check how many points you’ll need. When I work upstairs, I want to know whether the connection reaches my workspace. Around 36% of consumers choosing Wi-Fi for a loft workspace rank upstairs coverage as their top priority.
Reliability while working Compare the connection at the router with the one in the loft, and check whether you can connect the points by cable. When working from home, I want a connection I can rely on throughout the working day. Around 29% of consumers say reliability is their main buying concern.
Reversible installation Check the cable route, the required operating mode and any alterations needed to the property. As a renter, I want to extend my network without assuming I can make permanent changes. Around 21% of consumers put a reversible installation and compatibility with existing equipment at the top of their list.
Equipment and running costs Test your connection first, then compare how many points you need and the power consumption of equipment that stays on all the time. I don’t want to buy extra devices that won’t solve my loft connectivity problem. Around 14% of consumers say cost and the amount of equipment are their main buying concerns.

Wi-Fi pitfalls in the loft

  • Buying a faster router without checking what’s causing the problem

    If the issue is with your internet connection or the router’s location, new equipment won’t necessarily solve it.

    Compare a wired test at the router with the connection in the loft. If possible, try moving the router to a better location.

  • Putting a wireless mesh point where the signal is weak

    The intermediate point needs to be able to connect to your existing network to pass the signal on.

    Try a spot between the router and the loft. Consider a wired connection if you can run one.

  • Assuming the stated maximum speed is what you’ll get in the loft

    A product’s specifications alone won’t tell you what connection you’ll get at your workspace. With powerline, the socket you use and sources of electrical interference can also make a difference.

    Test the connection where you work. Devolo recommends plugging powerline adapters directly into a wall socket wherever possible.

  • Assuming access point mode retains every router feature

    TP-Link says some features aren’t available when a Deco system is in access point mode.

    Decide in advance whether you only need extra coverage or whether you also need specific features of the new system.

Brands to compare

TP-Link

The Deco X50 is a Wi-Fi 6 mesh range with multiple points and an optional wired connection between them.

  • TP-Link lists three gigabit ports per Deco point and describes an access point mode for use with an existing router.
  • In this mode, the existing router manages IP address allocation, and some Deco features aren’t available. The stated coverage isn’t a guarantee of coverage in your loft.

FRITZ!

According to the manufacturer, the FRITZ!Mesh Set 1700 can connect to an existing router or fibre modem via LAN.

  • The manufacturer lists automatic updates and offers sets with different numbers of points.
  • Check how many points are included in the specific set and whether that’s right for your home.

ASUS

The ZenWiFi BD4 is a Wi-Fi 7 mesh range with options for a wired connection between points.

  • ASUS lists two 2.5G Ethernet ports, which are useful if your network and cable route can make use of them.
  • The stated wireless speeds and coverage don’t predict the performance you’ll get in a particular rented home.

devolo

devolo powerline uses your home’s electrical wiring to connect adapters; a suitable adapter can provide Wi-Fi in the loft.

  • This option can avoid running an Ethernet cable between floors.
  • Performance can depend on the sockets you use and sources of electrical interference. Test the adapters in the places you intend to use them.

KPN

SuperWifi is an additional Wi-Fi option for people who already use KPN for their home network.

  • KPN describes help with positioning through the MijnKPN app, and gives you the option to rent or buy points.
  • This option is designed for use with the KPN network; the information doesn’t guarantee coverage in a specific loft.

Joybuy products

These products cover mesh, powerline, replacing a router or extending an existing Wi-Fi network. Before you buy, check which option suits your test results, existing router and cabling options.

TP-Link Deco BE68 2-Pack

TP-Link Deco BE68 2-Pack

A good fit if you’re considering a mesh system with two points and want the option of a wired or wireless connection between them.

The product description lists Wi-Fi 7, tri-band, wired and wireless backhaul, and multiple WAN/LAN ports.

Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7, white, 2.4 GHz and 5 GHz

ASUS ZenWiFi BD4 Dual-Band Wi-Fi 7, White

Worth considering if you’re looking at mesh and want the option of a wired connection between points.

The product description lists dual-band Wi-Fi 7 (802.11be), 2.4 GHz and 5 GHz, and wired backhaul.

Joybuy
TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

A good option if you want to try a network connection over your existing electrical wiring when running an Ethernet cable upstairs isn’t practical.

The product description lists powerline, Wi-Fi and a Type E plug.

Joybuy
ASUS RT-AX52 AX1800 AiMesh dual-band router

ASUS RT-AX52 AX1800 AiMesh Router

An option to consider if your tests suggest that your current router is the limiting factor.

The product description lists dual-band Wi-Fi 6 and AiMesh compatibility.

Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

Worth considering if you want to extend an existing Wi-Fi network and be able to plug the device in somewhere else after the initial setup.

The product description lists 2.4 GHz and two external antennas. Test the connection where you work.

Joybuy

Frequently asked questions

Should I test my internet connection or my Wi-Fi first?

Start by testing with a computer connected by Ethernet cable, then compare the result with the connection in the loft. If the wired connection is also slower than the speed promised by your provider, contact them before buying extra Wi-Fi equipment.

Can I connect a mesh system to my existing router?

That depends on the system and the operating mode you choose. TP-Link describes an access point mode for Deco in which the existing router assigns IP addresses; check which mesh system features are available in that mode.

Where should I put an extra wireless Wi-Fi point?

Choose a spot in between where the point can still connect to the main network, then test the signal in the loft. Putting a point directly in a workspace with poor reception won’t necessarily be enough; the Consumentenbond stresses the importance of positioning.

Can I install a cable as a tenant?

It depends on the work involved. According to the Dutch government, you don’t need permission for minor changes that can be reversed without excessive cost, but renovation work does require permission. Assess the specific cable route and any alterations separately; this general information doesn’t give permission for every type of installation.

Can I use my own router in the Netherlands?

According to ACM ConsuWijzer, you’re free to choose your router. If you connect your own equipment directly to your provider’s network, it must meet the relevant requirements. Ask your provider for the settings you need to connect, and keep your device up to date.