Watching films where the Wi-Fi is weak
Your main aim is to improve the connection in the loft, and you can first test what your TV or streaming device receives there.
First, test the connection where you watch films: a Wi-Fi booster won’t fix a slow internet connection. If there’s just one weak spot, a well-positioned repeater could help; if you have an Ethernet cable running to the loft, a wired access point is a more obvious choice. If several rooms need better coverage, compare mesh systems and check router compatibility and the connection at the intended location before you buy.
Your main aim is to improve the connection in the loft, and you can first test what your TV or streaming device receives there.
You can use or install a cable, and would prefer a wired connection to a Wi-Fi access point over a completely wireless solution.
Other floors also need better Wi-Fi, so you’re comparing several access points with a single standalone repeater.
First, identify where the connection is falling short and how many areas need coverage. Then choose between a wireless repeater, a wired access point or several mesh nodes.
A good fit if: Wi-Fi is poor in just one part of the loft and the repeater can still receive a usable signal from the router when placed somewhere in between.
Bear in mind: the connection back to the router is still wireless and can be weakened by floors or insulation.
A good fit if: you have, or can install, an Ethernet cable to the loft and want a Wi-Fi access point connected by cable.
Bear in mind: you’ll need to run a cable. Check that the Ethernet port on your chosen device can be used to connect it to the router.
A good fit if: other rooms as well as the loft have poor coverage.
Bear in mind: a kit means more equipment and decisions about where to place it. Without a cable, the connection between nodes depends on the wireless conditions. Tweakers describes wired backhaul as more stable than a wireless connection between mesh nodes.
A good fit if: running an Ethernet cable isn’t practical and Wi-Fi struggles to reach between floors.
Bear in mind: performance depends on your electrical wiring, so test the solution in your own home.
| What to consider | What should you check? | Who is this important to? |
|---|---|---|
| A stable film stream | Test the connection on the playback device in the loft, and check the internet speed, Wi-Fi coverage and location of any additional access point. Netflix recommends a stable connection of at least 5 Mbps for FHD and 15 Mbps for 4K UHD for its own service. | I mainly want to watch nature films in the loft without interruptions, and first need to know whether the connection is good enough on the TV itself. Around 36% of consumers prioritise stable streaming in that location. |
| Connection between floors | Check whether an Ethernet cable is already in place, whether one can be installed and whether your chosen device supports access point mode. A wireless repeater also needs a usable signal of its own. | If the connection between the router and the loft is the weak point, I want to know whether a cable is an option before choosing a wireless solution. Around 29% of consumers put this connection first. |
| Coverage in several rooms | Map the weak spots in your home and compare a solution for one area with a kit that includes several Wi-Fi access points. | I want coverage not just by the TV in the loft, but in other rooms too, so I’m looking at how many nodes I need. Around 21% of consumers prioritise coverage in several areas. |
| Router compatibility and maintenance | Check your exact router model, compatibility with brand-specific mesh features and the specific version of the device. Also check whether firmware updates are available. | If I want to keep using my existing network equipment, I need to know which features work with it and how to maintain the device. Around 14% of consumers prioritise compatibility and maintenance. |
A product’s specifications don’t tell you what speed your TV will actually receive in the loft. Your internet connection and the link between the router and the access point also matter.
Test the connection where you watch, then work out whether the problem lies with your internet service, Wi-Fi coverage or the connection between network devices.
A wireless repeater needs to connect to the router itself; floors and insulation can weaken that signal.
Test a midway location where the signal is still usable, or compare a wired access point if there’s an Ethernet cable to the loft.
TP-Link’s OneMesh requires a compatible OneMesh router. ASUS describes AiMesh as a feature for equipment that supports AiMesh; ordinary Wi-Fi extension isn’t the same as these brand-specific features.
Check your exact router model and which features the combination supports before choosing a device.
Choosing an incompatible device could lead you to replace your existing network equipment unnecessarily.
Powerline depends on your electrical wiring. With wireless mesh, the connection between nodes still depends on the conditions in your home.
Compare the connection options in your home and test your chosen solution once it’s set up in the loft.
Powerline may require extra adapters; if the connection isn’t good enough, you may still need to install Ethernet cabling.
Offers both standalone repeaters and Deco mesh kits. These are different options, not interchangeable models.
The FRITZ!Repeater 1200 AX is worth considering if you can use its LAN connection or want to use FRITZ! Mesh with compatible equipment.
The RP-AX58 is a standalone repeater; AiMesh is mainly relevant if your existing router supports it.
The EAX15 is a Wi-Fi 6 extender and another option to consider when extending the coverage of an existing router.
This selection includes a standalone repeater, wired access points and a mesh kit for homes where several rooms need better coverage. If you’re buying equipment in the Netherlands, check that the specific device has the correct CE marking. The Dutch Authority for Digital Infrastructure makes clear that a product listing alone doesn’t confirm this marking.
No image available
Could suit you if you want to improve Wi-Fi in one area and can place the device where it still receives a usable signal from the router.
The product description lists a 2.4 GHz connection, speeds of up to 300 Mbps and two external antennas. These are product specifications, not measurements taken in a loft.
No image available
Could suit you if there’s an Ethernet cable to the loft and you want to use a wired access point there.
The product title lists Wi-Fi 6 and Power over Ethernet (PoE); the product description also mentions an Ethernet connection. This wired access point option requires a cable to the loft.
No image available
Could suit you if you want to extend your existing Wi-Fi wirelessly and have a location where the device can still connect to the existing network.
The product description lists dual-band and Wi-Fi 6; stated speeds are product specifications, not a real-world test in a loft.
No image available
Could suit you if you want to choose between wireless extension and connecting an access point via Ethernet.
The product information lists speeds of up to 300 Mbps, two external antennas, WPS and passive PoE. Wireless repeating requires a usable router signal; the access point option needs a cable.
No image available
Could suit you if several rooms need Wi-Fi access points; if you only have one weak spot, a two-device kit may be more equipment than you need.
The product description lists two mesh devices and both wired and wireless backhaul. Without a cable, the connection between nodes depends on the wireless conditions.
First, test the internet speed on the playback device in the loft. Netflix recommends a stable connection of at least 5 Mbps for FHD and 15 Mbps for 4K UHD for its own service; better Wi-Fi coverage won’t fix a slow internet connection.
Place a wireless repeater where it can still receive a usable signal from the router. If there’s an Ethernet cable to the loft, compare a wired access point or the access point mode of a suitable model. TP-Link says the RE605X has a signal indicator that can help when positioning it wirelessly.
Check for firmware updates when you set the device up, and then regularly afterwards. The Dutch online information platform VeiligInternetten recommends keeping connected devices up to date for performance and security.
For an eligible online purchase from a business, you generally have a 14-day cooling-off period. You’re also entitled to a product that works as it should under the statutory guarantee. In the Netherlands, there’s no fixed statutory guarantee period, and the seller is your point of contact if a product is faulty. This is separate from any manufacturer’s guarantee.
According to the Dutch Authority for Digital Infrastructure, Wi-Fi on designated frequencies is licence-exempt provided you meet the conditions of use; licence-exempt frequency use doesn’t require notification or registration. This doesn’t remove product requirements: equipment must have the correct CE marking.