Who needs Wi-Fi in the loft?

Student with a permanent study space in the loft

You attend live lectures in one place and may be able to use Ethernet there; a stable connection matters more than Wi-Fi coverage throughout the whole house.

Student without a cable to the loft

You want to get Wi-Fi to the loft without running a cable. First, check whether a wireless access point in an intermediate location can still receive a strong enough signal from the router.

Household with weak Wi-Fi across several floors

If coverage is poor not only in the loft but also in other parts of your home, a network of connected Wi-Fi points may be more useful than adding a single repeater.

What should you look for in loft Wi-Fi?

Wired access point or mesh node

Choose this if: there’s already a network cable to your regular loft workspace, or you can run one.

Bear in mind: running a cable takes effort; a full mesh kit may be unnecessary if you only need extra coverage in the loft.

Standalone wireless repeater

Choose this if: Wi-Fi is weak in one spot and you can find a location between the router and the loft with a usable signal.

Bear in mind: the repeater first needs to receive the router’s signal before it can extend it; putting it in the loft won’t help if the signal has almost disappeared by then.

Wireless mesh system

Choose this if: several areas or floors need coverage and you want your Wi-Fi points to work together.

Bear in mind: extra nodes need space and power; a wireless connection passing through a floor can still be a weak link.

Powerline with Wi-Fi

Consider this if: running a cable isn’t practical and the wireless signal between floors is too weak.

Bear in mind: performance depends on your home’s electrical wiring; try the adapters in the sockets you actually plan to use.

What to consider What should you check? Who is this important to?
Stability during lectures If you can run a cable to the loft, check whether the device supports wired access point mode or Ethernet backhaul. If I want to avoid interruptions during a live lecture at a fixed location, I first check whether I can connect the Wi-Fi point by cable. Around 36% of consumers prioritise an uninterrupted connection during lectures.
Loft coverage without a cable Find an intermediate location where the Wi-Fi point can still receive the router’s signal; check whether the device has a placement assistant. If I don’t want to run a network cable to the loft, I want to know whether the Wi-Fi signal still reaches an intermediate spot. Around 29% of consumers prioritise loft coverage without a cable.
Coverage across several floors Check how many Wi-Fi points are included in the kit and whether Ethernet backhaul is possible in places where you can use a cable. If other rooms or floors also have weak Wi-Fi, I don’t want to improve coverage in just one spot in the loft. Around 21% of consumers prioritise coverage across several floors.
Easy to extend Check whether the device has repeater mode and whether any brand-specific mesh features work with your router. If Wi-Fi is weak in just one place at home, I’d prefer to make only a small addition to my existing network. Around 14% of consumers prioritise a simple solution for one weak spot.

Common pitfalls when buying Wi-Fi for the loft

  • Putting a repeater in the loft straight away

    The connection back to the router also needs to be usable. A point in a spot with virtually no reception won’t be able to pass the signal on effectively.

    First, find an intermediate location and test the reception there. If you can’t find a suitable spot, look into a wired Wi-Fi point.

    You may still need an additional Wi-Fi point or a cable installation.

  • Assuming the advertised maximum speed is what you’ll get in the loft

    The connection to the router, obstacles and, with powerline, your home’s electrical wiring all affect performance.

    Test the finished setup where you attend your lectures; don’t use the theoretical maximum speed as a prediction for that location.

  • Assuming mesh works with every router

    A device may work with other routers as a standard repeater or access point, while its own mesh feature requires a compatible router.

    Check standard range-extender functionality and brand-specific mesh compatibility separately for the exact model and your router.

    Some mesh features may require a compatible router or an additional Wi-Fi point.

  • Trying to use older dLAN adapters with a Magic kit

    devolo states that Magic 2 WiFi next is not compatible with adapters from the older dLAN range.

    Check which product family your existing adapters belong to before deciding how to expand your setup.

    You may need additional compatible adapters to expand the system.

Brands to consider

TP-Link

TP-Link offers both standalone range extenders and Deco mesh kits. The right option depends, among other things, on the coverage you need and where you can install a Wi-Fi point.

  • According to TP-Link’s Dutch product specifications, the RE605X has a gigabit port, access point mode and a placement indicator.
  • OneMesh requires a compatible OneMesh router. A three-device Deco X50 kit may be more than you need if you only want to improve coverage in one loft room.
  • TP-Link lists optional Ethernet backhaul for the Deco X50.

FRITZ!

The FRITZ!Repeater 1200 AX may be a good fit if you already have a FRITZ!Box or are looking for a repeater with a LAN connection.

  • FRITZ! lists Wi-Fi 6, a gigabit LAN port and mesh connectivity with a FRITZ!Box.
  • The model can also be used with other routers, but don’t assume the FRITZ! mesh features will work in the same way.

ASUS

The RP-AX58 works as a repeater or access point; its AiMesh feature is most relevant if you have a compatible ASUS router.

  • ASUS lists access point mode and AiMesh support with a compatible ASUS router.
  • According to ASUS, the Wi-Fi 6 features listed require compatible devices, and 160 MHz isn’t available in every country.

devolo

The Magic 2 WiFi next Starter Kit offers a powerline option when running a cable is difficult and wireless reception between floors is too weak.

  • According to devolo, the kit uses your home’s electrical wiring; the Wi-Fi adapter has two gigabit ports.
  • Magic and older dLAN adapters aren’t compatible with each other. Powerline performance also depends on your home’s electrical wiring.

Joybuy products for loft Wi-Fi

This selection includes powerline adapters, a standalone repeater, wired access points and mesh systems for a permanent study space in the loft or to extend coverage to several areas.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

May be suitable if the wireless signal between the router and the loft is too weak and running a cable isn’t practical.

Powerline performance depends on your home’s electrical wiring; try the connection in the sockets you plan to use.

View at Joybuy
Wi-Fi Repeater Pro Black

Wi-Fi Repeater Pro Black

May be suitable for one local weak spot if the repeater can still receive a strong enough signal from the router in an intermediate location.

Test reception in the location you’ve chosen; a repeater can’t restore a router signal that’s already almost non-existent there.

View at Joybuy
TP-Link TL-WA801N access point

TP-Link TL-WA801N access point

May be suitable for a permanent study space in the loft if you can run a cable to the access point.

The product name lists speeds of up to 300 Mbps, two antennas, WPS and Passive PoE; the stated maximum speed isn’t a measurement of performance in your loft.

View at Joybuy
TP-Link Deco X50 2-pack dual-band Wi-Fi 6

TP-Link Deco X50 (2-pack)

May be suitable if you want several Wi-Fi points to work together rather than simply extending coverage in one spot.

The product name lists dual-band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax). TP-Link lists optional Ethernet backhaul for the Deco X50; check whether a wired connection between the points will work in your home.

View at Joybuy
TP-Link Omada EAP613 access point

TP-Link Omada EAP613 access point

May be suitable for a permanent study space in the loft if you can run a cable to the access point.

The product name lists PoE and 1775 Mbps; this stated speed isn’t a measurement of performance in the loft.

View at Joybuy

Frequently asked questions

Where should you place a wireless booster for the loft?

Don’t automatically put it where the Wi-Fi is worst. The Dutch Consumers’ Association recommends choosing a location where the Wi-Fi points can communicate well with each other; then test the connection in the loft during the type of live session you plan to use the device for.

Is a repeater enough if the internet connection also keeps dropping near the router?

Not necessarily: an extra Wi-Fi point extends the range locally, but won’t automatically fix a problem that also occurs close to the router or with a wired connection. First, work out where the fault lies.

Can you add a new mesh repeater to any existing router?

Not for every mesh feature: a device may sometimes work with other routers as a standard extender, while its own mesh feature requires a compatible router. Check both features for the exact model and your router.

How can you check the Wi-Fi connection after installation?

Check reception where you attend your lectures and test a live connection there. This lets you assess the placement in the situation where you actually plan to use the Wi-Fi point.

Do you need a licence for loft Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi on designated frequencies when used in accordance with the applicable conditions. Radio equipment placed on the market must also meet the relevant European requirements and carry the correct CE marking; check this for the version you’re buying.