Who is this choice relevant to?

Archive user in the loft

You want to access the club archive in your converted loft and find out whether you need an extra Wi-Fi access point.

Club network administrator

You coordinate the router, access to the archive and any guest Wi-Fi. If the archive contains personal data, appropriate access rights must be set up.

Volunteer setting up the Wi-Fi

You choose between running an ethernet cable to the loft and using a wireless mesh node, while taking installation and power requirements into account.

What factors determine the choice?

First check the connection in the loft and whether a cable can be run there. Then decide whether to replace the router, add an access point or use mesh.

Keep or replace the router

When: if your existing set-up provides usable Wi-Fi in the loft, you may not need new equipment; replace the router only if it needs replacing.

Consider: a new router in the same place won’t automatically bring an extra Wi-Fi access point closer to the loft.

Wired access point

When: if there’s an ethernet cable to the loft, or you can run one, and you mainly need Wi-Fi up there.

Consider: running a cable takes work; an access point that uses PoE also needs a compatible power source.

Mesh

When: if you want Wi-Fi access points in several places and can connect them by cable, or if there’s a suitable spot for a wireless node in between when no cable is available.

Consider: the wireless connection between mesh nodes still depends on their placement and how much the floors weaken the signal.

Factor to consider What to look for when buying Who is this important for?
Wi-Fi coverage in the loft Compare the connection in the loft with the one near the router and decide where an extra access point could go. If I want to access the archive in the loft, the Wi-Fi needs to be usable there. Around 36% of consumers put loft coverage first.
Stable connection Test the connection while accessing the archive and check whether a cable and suitable network ports are available. I want to be able to look up archive documents without the connection dropping out. Around 29% of consumers prioritise connection stability.
Access and security Check the management and guest network settings; set up access rights separately in the archive system. If the archive contains personal data, I want to know who can access it and how that access is managed. Around 21% of consumers prioritise access management.
Installation and power Plan the cables, sockets, any PoE power supply and management requirements in advance. I want to keep installation and any extra equipment manageable. Around 14% of consumers prioritise ease of installation.

Pitfalls when buying Wi-Fi for the loft

  • Focusing only on maximum speed or claimed coverage

    A stated speed or coverage claim won’t necessarily tell you how the connection will perform in your loft. Obstacles and the connection between mesh nodes also play a part.

    First check the Wi-Fi in the loft, then decide where an extra access point could go and whether to connect it by cable or wirelessly.

    Depending on the option you choose, you may still need an extra Wi-Fi access point or cable later on.

  • Choosing an access point without checking its power supply

    According to the manufacturer, the Ubiquiti UniFi U6+ uses PoE power. The cable route and available power supply must therefore suit the installation.

    Before buying, check that a compatible PoE power source and ethernet cable are available.

    Installation may require a compatible PoE power source and cable.

  • Confusing a guest network with access management for the archive

    Wi-Fi access and access rights to personal data in the archive system are two different things. The Dutch Data Protection Authority stresses that access rights for personal data must be set up appropriately.

    If the archive contains personal data, set up access rights in the archive system as well as configuring the Wi-Fi.

  • Confusing a two-node set with a three-node set

    The number of nodes included varies by version and determines how you can position the set.

    Compare the full model name and number of nodes with what you need for the space.

    If your chosen set-up needs more nodes than are included, you may need extra equipment.

Brands to compare

TP-Link

The Deco X50 is a mesh option for extending coverage across floors, with the option of ethernet backhaul.

  • TP-Link lists dual-band Wi-Fi 6, three gigabit ports and optional ethernet backhaul for the X50.
  • The coverage quoted by TP-Link applies to the set and doesn’t measure the connection in your loft.

Ubiquiti

The UniFi U6+ is a separately managed access point for a wired connection to the loft.

  • Ubiquiti lists PoE power, one gigabit network port and guest network isolation.
  • This access point doesn’t replace an internet router; check what power supply and management environment you’ll need.

FRITZ!

The FRITZ!Repeater 1200 AX can extend an existing router’s coverage; it can also connect to a FRITZ!Box via LAN.

  • FRITZ! lists one gigabit LAN port; when paired with a FRITZ!Box, the repeater adopts its Wi-Fi settings.
  • Don’t assume it will offer the same mesh integration with every router from another brand.

ASUS

The ZenWiFi BT10 is a mesh system worth comparing if you’re also considering network ports and configuration options.

  • ASUS lists an access point mode, a 6GHz band and 10G ports for the BT10.
  • The stated maximum Wi-Fi speed is an ASUS specification, not the speed you can expect in the club archive in the loft.

Joybuy products for loft Wi-Fi

This selection includes mesh sets for extending Wi-Fi to several areas, as well as a wired access point. Compare the cable route, number of nodes needed and available power supply with the set-up in your club building.

TP-Link Deco BE68 mesh set with two nodes

TP-Link Deco BE68 (2-pack)

Suitable if you want to extend Wi-Fi using several nodes and have the option of wired or wireless backhaul.

Tri-band Wi-Fi 7; mesh set with two nodes and several WAN/LAN ports.

The installation guide mentions connecting to a modem and setting up via the Deco app. Check the CE marking on the device you’re actually buying.

View at Joybuy
TP-Link Deco X50 mesh set with three nodes, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6

Suitable if you want a mesh network with several nodes and can use a cable between them for ethernet backhaul.

Dual-band Wi-Fi 6; three gigabit ports per unit; ethernet backhaul is optional and requires a cable connection between the nodes.

Check the CE marking on the device you’re actually buying.

View at Joybuy
Linksys Velop Pro 7 mesh set

Linksys Velop Pro 7

Worth considering if you want an expandable mesh network managed through an app across several rooms.

Tri-band Wi-Fi 7; the product description mentions adding extra nodes or compatible mesh devices, with management via the Linksys app.

Check the CE marking on the device you’re actually buying.

View at Joybuy
TP-Link Deco X50-PoE mesh set with three nodes

TP-Link Deco X50-PoE (3-pack)

Worth considering if you want a mesh set with several nodes and a PoE cable connection.

Mesh Wi-Fi 6; two ethernet ports per unit; PoE support.

Check in advance that the cable route and power supply are suitable for the installation. Also check the CE marking on the device you’re actually buying.

View at Joybuy
TP-Link Omada EAP613 Wi-Fi access point

TP-Link Omada EAP613

Suitable if you want to connect a separate Wi-Fi access point to your router using an ethernet cable.

Wi-Fi 6; the product description mentions PoE or DC power and ceiling or wall mounting.

To use it as a wired access point, you’ll need an ethernet cable running to the device. Check the CE marking on the device you’re actually buying.

View at Joybuy

Frequently asked questions

Do you need to replace your existing broadband provider’s router if the Wi-Fi is weak in the loft?

No. A weak connection in the loft doesn’t automatically mean you need to replace the router. You can connect a wired access point to an existing router; if you do replace it, check the connection settings required by your provider.

Where should you place a wireless mesh node?

Choose a spot where the node still has a usable wireless connection to the main network, then check the Wi-Fi in the loft. Signal loss between nodes can limit the connection.

Is a guest network enough to protect club archive documents?

No, a guest network doesn’t replace access rights in the archive system. If the archive contains personal data, set up appropriate access rights for that data; the Dutch Data Protection Authority stresses the importance of managing access rights properly.

What maintenance does your own router need?

Update the firmware when you start using the router, then check regularly for updates. The National Cyber Security Centre recommends firmware updates to address known vulnerabilities.

Which product marking should you check on Wi-Fi equipment in the Netherlands?

Check the CE marking on the device you’re actually buying. The Dutch Authority for Digital Infrastructure states that Wi-Fi equipment sold on the Dutch market must meet the applicable requirements for radio equipment and carry the mandatory marking.