Who might need to make this choice?

Loft worker with weak Wi-Fi coverage

If video calls keep dropping out in your converted loft, it may be worth extending your existing network. VodafoneZiggo notes that people working from home sometimes move to another spot to get better reception.

Video caller with an Ethernet cable to the loft

If you can use an Ethernet cable at your workspace, you could consider an access point instead of a wireless backhaul. TP-Link lists access point mode for the RE605X.

User with an existing mesh router

If you want to add your loft to an existing network, check that your router and the extender are compatible with each other’s mesh features. TP-Link and FRITZ! set out the requirements for their own mesh functions.

What should you consider when choosing?

The connection between your router and the loft matters: a repeater needs a usable signal from the router. The Consumers’ Association recommends testing your internet connection at the router over Ethernet to help identify where a problem is occurring.

What to consider What to look for Who is this important for?
Usable coverage up to the loft Test possible locations between the router and your loft workspace, not just the spot where you want to make video calls. If I work in the loft, I want to place the extender somewhere it can still reach the router; around 36% of consumers prioritise coverage in the loft.
Reliable video calls Compare the Wi-Fi in the loft with a wired test at the router, so you don’t mistake a problem with your internet connection for a Wi-Fi issue. If a call keeps dropping out, I want to find out where the connection is lost first; around 29% of consumers prioritise a reliable connection during video calls.
Compatibility Check your router model and the mesh functions it supports; for powerline, check the adapter range too. If I want to extend my existing network, the solution I choose needs to work with my equipment; around 21% of consumers focus most on compatibility.
Complete setup Compare how many devices you’ll need and whether you’ll need to run a cable; a basic powerline connection requires at least two adapters. If I want to get a connection to the loft without unnecessary components, I want to know what the complete setup involves in advance; around 14% of consumers focus mainly on the number of devices and the total cost.

Pitfalls of extending Wi-Fi to your loft

  • Placing a repeater where the router’s signal isn’t usable

    A wireless repeater needs to maintain its own connection to the router. Distance and ceilings can weaken the signal.

    First, assess possible locations between the router and the loft. If you have an Ethernet cable, consider an access point too.

  • Assuming the stated Wi-Fi speed guarantees good video calls

    A product specification doesn’t tell you how well the connection works in your home. Dropouts can also be caused by your internet connection.

    Compare a wired test at the router with the connection in the loft, and assess the setup where you work.

  • Assuming every router offers the same mesh features

    An extender may connect to a router without automatically supporting the same mesh features. TP-Link says OneMesh requires a compatible OneMesh router; FRITZ! describes mesh functionality with a FRITZ!Box.

    Check your router model and the mesh features it supports before choosing an extender.

  • Comparing a single powerline adapter with a complete kit

    You need at least two adapters for a basic powerline connection. Performance also depends on your electrical installation, and extension leads can have a negative effect.

    Compare complete kits and check that any existing adapters are part of the range you choose.

Brands to compare

TP-Link

According to TP-Link, the RE605X is an example of a repeater with a gigabit Ethernet port and access point mode.

  • OneMesh is an option with a compatible OneMesh router.
  • The stated wireless speeds don’t indicate how stable the connection will be in a particular loft.

FRITZ!

The FRITZ!Repeater 1200 AX is an option to consider if you’re looking at a repeater or an extension via LAN, particularly if you already have FRITZ!Box equipment.

  • FRITZ! lists a gigabit LAN port and compatibility with other routers.
  • The manufacturer describes mesh functionality when used with a FRITZ!Box.

devolo

The Magic 2 WiFi next Starter Kit is an example of a Wi-Fi extension that uses your home’s electrical wiring to connect rooms.

  • devolo lists two gigabit LAN ports on the Wi-Fi adapter.
  • You can extend the setup with adapters from the Magic range; dLAN adapters aren’t supported. Performance also depends on your electrical installation.

KPN

SuperWifi is a provider-specific option to look into if you use KPN equipment or want to check what support your provider offers.

  • According to its product information, KPN offers SuperWifi points to rent or buy with subscriptions.
  • Check the installation requirements for your own modem; this option may not be suitable with another provider.

Joybuy products for loft Wi-Fi

This selection includes powerline, mesh, wireless repeaters and wired access points, offering different ways to get Wi-Fi in your loft. For each model, check that it works with your existing network and suits your planned setup.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

A powerline kit could be an alternative if a wireless connection to the loft is difficult; performance depends on your electrical installation.

The product name identifies it as a starter kit. You need at least two adapters for a basic powerline connection.

Joybuy
TP-Link Deco X50 3-pack, dual-band, Wi-Fi 6

TP-Link Deco X50 (3-Pack), Dual-Band, Wi-Fi 6

A mesh setup could suit you if you want to cover several rooms; check in advance how it will work with your existing router.

The product name specifies a 3-pack, dual-band (2.4 GHz/5 GHz) and Wi-Fi 6 (802.11ax).

Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

A wireless repeater could suit you if there’s a spot between the router and the loft where the router’s signal is still usable.

The product information lists 2.4 GHz Wi-Fi; check that it suits your network and how you plan to use it.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N access point/Wi-Fi extender

This model may be worth considering if you’re looking for an access point or an extender; check which mode suits your cabling.

The product name lists N up to 300 Mbps, 2 antennas, WPS and Passive PoE.

The product information lists 2.4 GHz and a 10/100 Mbit/s LAN connection.

Joybuy
TP-Link Omada EAP613 access point

TP-Link Omada EAP613 access point

An access point is worth considering if you have a suitable cable route to the loft.

The product name lists 1775 Mbps and Power over Ethernet (PoE).

Joybuy

Frequently asked questions

Will a Wi-Fi booster help if video calls also drop out near the router?

Not necessarily. First, test the connection using a computer connected to your home network with an Ethernet cable. If those results are poor too, investigate your router, internet connection or provider before choosing a Wi-Fi booster.

Where should I place a wireless repeater for the loft?

Place the repeater somewhere it can still receive a usable signal from the router, rather than automatically putting it in the spot with the weakest coverage. TP-Link lists a signal indicator on the RE605X that can help you find a suitable location.

Can I combine existing powerline adapters with a devolo Magic 2 WiFi next?

First, check the adapter range: devolo says adapters from the Magic range are compatible, but dLAN adapters aren’t supported.

Does a mesh extender work with every router?

No. The ability to connect doesn’t automatically mean that all mesh features will work together. TP-Link says OneMesh requires a compatible OneMesh router; FRITZ! describes mesh functionality with a FRITZ!Box. Check support for your router model.

Which UK regulations apply when buying a Wi-Fi booster?

Radio equipment must meet the applicable European requirements and carry the required CE marking. The Dutch Authority for Digital Infrastructure reports that the applicable RED 3.3 cybersecurity requirements have been in force since 1 August 2025. Check the marking and documentation for the version you want to buy; a product listing alone doesn’t confirm compliance.