Wi-Fi products at Joybuy
These product options include powerline with Wi-Fi, a mesh system, a wireless repeater and a wired access point for Wi-Fi in the loft.
No image available
TP-LINK TL-WPA7517 KIT powerline adapter starter kit
An option if the Wi-Fi between your router and the loft isn't strong enough and running an Ethernet cable would be difficult.
The product specifications list IEEE 1901 and a Type E plug. Transmission over the mains can vary depending on your wiring and sockets; devolo recommends testing the connection where you plan to use it.
View at Joybuy
No image available
TP-Link Deco X50 (3-pack)
A mesh option if you want several Wi-Fi points or can run Ethernet to the loft.
This is a dual-band Wi-Fi 6 system with three nodes; the product description lists Ethernet ports on each unit. TP-Link says Ethernet backhaul is an option for Deco X50. You don't automatically need three nodes for one workshop spot.
View at Joybuy
No image available
Wi-Fi Repeater Pro Black
A wireless repeater to consider if there's still a usable Wi-Fi signal at a midway location.
The product description lists 2.4 GHz, up to 300 Mbps and WPA-PSK/WPA2-PSK. The stated maximum speed doesn't tell you what connection you'll get in the loft; placement and signal strength still matter.
View at Joybuy
No image available
TP-Link Omada EAP653
A wired access point to consider if you can run an Ethernet cable to the loft.
The product description lists dual-band Wi-Fi 6, PoE support and wall or ceiling mounting. Check which cabling and PoE set-up is right for your installation.
View at Joybuy
Frequently asked questions
Where should you place a wireless repeater?
Choose a spot where the repeater still gets a good signal from the router, rather than automatically using the socket furthest away in the loft. The Consumers' Association advises keeping obstacles between Wi-Fi points to a minimum and recommends a midway position if the signal is weak further away.
Can you use a Wi-Fi booster with a cable as an access point?
Yes, if the model you choose supports that mode. TP-Link lists access point mode for the RE705X, and FRITZ! describes a LAN bridge for the FRITZ!Repeater 1200 AX. Check the mode supported by the exact model before you buy.
What should you check if powerline drops out during a workshop?
Test the adapters in the sockets you plan to use. According to devolo, electrical interference can affect data transmission; the manufacturer recommends plugging the adapters directly into wall sockets.
Will every repeater work with your router's mesh features?
No. Check compatibility between the exact devices and product range. TP-Link says OneMesh on the RE705X requires a compatible OneMesh router. A repeater that works as a standard extender won't automatically offer the same mesh features.
What product requirements apply to Wi-Fi equipment in the Netherlands?
Wi-Fi equipment sold as radio equipment in the Netherlands must meet the relevant European requirements. The Dutch Authority for Digital Infrastructure says that a compliant product carries a CE marking and that, since 1 August 2025, the relevant RED 3.3 cybersecurity requirements also apply to the applicable categories. Don't assume a product is compliant based on its model name alone.