Who is this guide for?

Gamer with a dedicated spot in the loft

You want to download large updates on a desktop PC or console, and may be able to run a network cable upstairs. Ziggo describes a wired connection as an option for rooms where Wi-Fi doesn’t work well.

Homeowner with one Wi-Fi dead spot

There’s poor coverage in one particular spot in your converted loft. You want to know whether a repeater will work there, without putting it somewhere the router signal has already dropped out. Ziggo describes a repeater as a device that rebroadcasts the signal it receives.

Household with several floors with weak coverage

You’re looking for better coverage not just in the loft, but in other rooms too. You’ll need to consider the number of Wi-Fi points and how they connect to one another; Tweakers discusses wired connections between mesh points as one possible setup.

What should you consider when choosing?

Start with the connection between your router and the loft: a cable can avoid a weak wireless link, while repeaters, mesh systems and powerline each have their own placement requirements.

Network cable and access point

Best suited when: you can run a cable to the loft, or want to connect one desktop PC or console directly by cable.

The trade-off: installing a cable takes work and may require extra equipment. Tweakers describes a wired connection between Wi-Fi points as the most stable backhaul, but that doesn’t guarantee a particular download speed.

Wireless repeater

Best suited when: coverage is poor in one particular spot and the repeater can still receive a usable signal from your router when placed somewhere in between.

The trade-off: the connection to your router remains wireless if the repeater itself isn’t wired. An Ethernet port for your console doesn’t automatically make that link wired.

Mesh system

Best suited when: you need coverage in several rooms or on multiple floors.

The trade-off: you’ll need several points and power sockets. According to Tweakers, wirelessly connected points in entry-level kits may not perform as well, particularly on a busy network.

Powerline with Wi-Fi

Best suited when: running a network cable isn’t practical and the wireless link between floors isn’t good enough.

The trade-off: the connection runs through your home’s electrical wiring. TP-Link lists the condition of the wiring and connected equipment as factors, so test the kit where you intend to use it.

What to consider What to look for when buying Who is this most relevant to?
Connection to a dedicated gaming spot Check whether you can run a cable to the loft and whether the access point supports access point mode. Also check that it has enough Ethernet ports for your PC or console. I want to download large updates on a desktop PC or console and would rather use a wired connection. Around 36% of consumers put a reliable connection to their dedicated gaming spot first.
Coverage in one spot in the loft Check whether the repeater can still receive a usable signal from your router when placed somewhere in between. Separately, check whether any mesh features will work with your router. If I want to improve coverage in one spot without installing a cable, the repeater itself still needs to be within range. This is the priority for around 29% of consumers with this need.
Coverage across several floors Compare the number of Wi-Fi points with the rooms that need coverage. Check whether you can connect the points by cable. I want to reach other rooms too, not just the dedicated download spot in the loft. Around 21% of consumers prioritise coverage across several floors.
Powerline through the mains Check whether the kit provides Wi-Fi from the loft adapter if you’ll be using wireless devices there. Test the adapters in the wall sockets you plan to use; TP-Link notes that electrical conditions can affect the connection. If a network cable isn’t practical, I want to be able to test an alternative to a wireless link. Around 14% of consumers prioritise this mains-powered option.

Common buying mistakes

  • Confusing a repeater with a wired access point

    If you connect a console to a repeater by cable, the link to the router is still wireless if the repeater itself connects wirelessly.

    Check how the device connects to your router and whether the model supports access point mode.

    A wired setup may still require a network cable or other networking equipment.

  • Choosing a mesh system based only on the number of points

    The number of points doesn’t tell you how they connect to one another. Tweakers warns that the wireless connection between points in entry-level kits can be less reliable, particularly when the network is busy.

    Decide where to place the points and check whether you can connect them by cable.

    Allow for the power sockets you’ll need and any cable installation.

  • Assuming the stated powerline speed is what you’ll get in the loft

    Actual performance depends in part on your home’s electrical wiring, extension leads and connected equipment. TP-Link lists these conditions as factors that affect powerline performance.

    Test a complete kit in the wall sockets you plan to use and check the connection in the loft.

Relevant brands to consider

TP-Link

TP-Link describes the RE605X as a repeater that can also work as an access point. This combination may be useful if you later run a cable to the loft.

  • According to TP-Link, the RE605X has a Gigabit Ethernet port and access point mode.
  • The OneMesh feature requires a compatible OneMesh router, so it won’t automatically work with every existing router.

FRITZ!

The FRITZ!Repeater 1200 AX is an option to look into if you already have a compatible FRITZ! network.

  • FRITZ! lists a Gigabit LAN port and connection via LAN to a FRITZ!Box.
  • The repeater can also be used with other routers, but check compatibility before expecting the full range of FRITZ! mesh features.

devolo

The Magic 2 WiFi 6 next Starter Kit is a powerline option to consider if running a cable is difficult and the wireless link to the loft isn’t working well.

  • devolo lists two adapters, Wi-Fi on the receiving adapter and two Gigabit ports.
  • The advertised maximum speed isn’t a measured speed in your home; the electrical wiring and connected equipment affect the result.

ASUS

Tweakers discusses the ZenWiFi BD4 as a mesh series for setups where you may need coverage in several places.

  • Tweakers specifically covers the entry-level BD4 kit and notes that performance depends on the setup you choose.
  • A 2-pack isn’t the same version as the 3-pack discussed by Tweakers; compare the specific option you’re buying.

Products for connecting to the loft

These Joybuy products suit different ways of getting a usable connection in the loft: a wired access point, mesh, powerline or a wireless repeater. Check the specific version and its placement requirements before choosing.

TP-Link EAP725-Wall, 5012 Mbit/s, white, with PoE

TP-Link EAP725-Wall, 5012 Mbit/s, PoE

Designed for a spot in the loft where a network cable is available and Wi-Fi is needed.

The product information lists Wi-Fi 7, PoE power and three Ethernet ports, including 2.5G support.

This access point option assumes you can run a network cable to the loft.

View at Joybuy
TP-Link Deco X50, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50, 3-pack, Wi-Fi 6

A mesh system to consider when several rooms or floors need coverage.

The product information lists three units, dual-band Wi-Fi on 2.4 and 5 GHz, and Ethernet ports on each unit.

Check where the points can be placed and whether you can connect them by cable.

View at Joybuy
TP-Link TL-WPA7517 KIT powerline adapter starter kit

TP-Link TL-WPA7517 KIT powerline starter kit

An option to test if running a cable is difficult and the wireless link to the loft isn’t good enough.

The product information describes a powerline adapter kit that uses your existing electrical wiring and provides Wi-Fi.

According to TP-Link, the electrical environment and connected equipment affect the actual connection.

View at Joybuy
TP-Link Deco XE75, 3-pack, tri-band Wi-Fi 6E

TP-Link Deco XE75, 3-pack, tri-band Wi-Fi 6E

A mesh system to compare if you need coverage in several parts of your home.

The product information lists three units, Wi-Fi on 2.4, 5 and 6 GHz, and Ethernet ports on each unit.

Check where you can place the points and how they can connect to one another.

View at Joybuy
TP-Link Omada EAP673-Extender dual-band repeater

TP-Link Omada EAP673-Extender dual-band repeater

A repeater to consider if you want to reach one spot that’s still within range of your existing network.

The product information lists dual-band Wi-Fi and one Ethernet port.

The device needs to be placed within range of your existing network.

View at Joybuy

Frequently asked questions

Where should you place a wireless booster for the loft?

Place it somewhere it can still receive a usable signal from your router, rather than only at the spot with the weakest coverage. TP-Link lists a signal indicator on the RE605X; then test the connection in the part of the loft where you download.

What can you do if a powerline kit is slow?

Following the manufacturer’s advice, plug the adapters directly into wall sockets and check the connection in the loft. The condition of your electrical wiring still matters; a theoretical maximum speed isn’t a guaranteed download speed.

Do you need a licence for ordinary home Wi-Fi in the Netherlands?

A licence is generally not needed for Wi-Fi on the designated frequencies, as long as you meet the conditions of use. The Dutch Authority for Digital Infrastructure distinguishes between licence-exempt use of frequencies and the product requirements for wireless equipment sold on the Dutch market.

What are your rights when buying online or if a product is faulty?

According to the Dutch government, many online purchases from a business come with a 14-day cooling-off period, subject to legal exceptions. If a product is faulty, contact the seller about your statutory guarantee; any manufacturer’s guarantee is in addition to this.