Who is this guide for?

Photo uploader in the loft

You regularly send large photo albums and want to find out whether the limiting factor is the Wi-Fi in the loft or your internet connection.

Homeowner with a tricky loft floor

There are obstacles between the router and your converted loft. You’re weighing up a cable, an intermediate repeater location or Wi-Fi over your mains electricity wiring.

Expanding an existing Wi-Fi network

You want to add another Wi-Fi access point and check which mesh features work with your current router.

What should you consider when choosing?

Measure your upload speed by the router and in the loft before choosing an option. The Dutch Consumers’ Association recommends testing over a network cable to assess your internet connection independently of Wi-Fi coverage.

Wireless Wi-Fi repeater

Suitable when: there’s a spot between the router and the loft where the repeater can still receive a good signal from the router.

Trade-off: placement and obstacles both affect whether the repeater can maintain a usable connection to the router.

Access point via Ethernet

Suitable when: you can run a network cable to the loft and want to provide Wi-Fi there.

Trade-off: running the cable takes effort, but the connection to the access point doesn’t have to pass wirelessly through the floor.

Powerline with Wi-Fi access point

Suitable when: running a cable isn’t practical and a wireless repeater can’t get a strong enough signal from the router at the desired location.

Trade-off: performance can vary between sockets and may be affected by electrical appliances. Test the sockets you intend to use.

Buying concern What to check Who is this important to?
Reliable uploads Check the connection by the router and in the loft; after installation, test the actual upload speed again. I want to send a photo album from the loft and first rule out my internet connection as the bottleneck. Around 36% of consumers put reliable uploads at the top of their list of buying concerns.
Signal through floors and walls Check where the router signal is still strong, whether running a cable is possible and whether powerline works through the sockets you want to use. With a tricky floor, I want to know which option can overcome the obstacles between the router and the loft. Around 29% of consumers put obstacles between the router and the loft first.
Working with your router For the exact model, check both standard operation and the requirements for the mesh features you want. I want an extension that suits my current router, without assuming that every mesh feature works with every router. Around 21% of consumers prioritise router compatibility.
Complete set-up and ongoing use Check which adapters are included, and factor in any cable installation and the stated or measured energy consumption. I want to know in advance what the complete set-up involves and what it will take to run. Around 14% of consumers prioritise the complete solution and its ongoing use.

Common mistakes

  • Assuming the highest Mbps figure is your expected upload speed

    A product specification doesn’t tell you how quickly you can upload from your loft to a photo-sharing service. Your internet connection could also be the bottleneck.

    Measure the speed by the router and in the loft, then test again after installation using your chosen set-up.

  • Putting a repeater in a Wi-Fi dead zone

    A wireless repeater needs to receive a usable signal from the router itself.

    First, look for an intermediate spot with good reception. If that doesn’t work, consider Ethernet or powerline.

  • Assuming mesh offers the same features with every router

    OneMesh, AiMesh and FRITZ! mesh each have requirements for the router they work with. Standard repeater operation isn’t the same as full mesh integration.

    Check your router’s make and model, along with the requirements for the feature you want on the exact extender you’re considering.

  • Assuming powerline works just like an Ethernet cable

    Performance over your mains wiring can vary between sockets and may be affected by electrical appliances.

    Test the adapters in the locations you plan to use them, and check whether any existing adapters belong to a compatible product range.

Brands to compare for this set-up

TP-Link

TP-Link describes the RE705X as a Wi-Fi 6 repeater with an Ethernet port and access point mode.

  • The manufacturer says it can extend Wi-Fi from standard routers.
  • According to TP-Link, OneMesh integration requires a OneMesh router. The stated link speeds aren’t a measured upload speed in your loft.

FRITZ!

According to the manufacturer, the FRITZ!Repeater 1200 AX combines Wi-Fi 6 with a Gigabit LAN connection.

  • The manufacturer describes LAN use with a FRITZ!Box, as well as use with other routers.
  • With another router, don’t assume that FRITZ!Box settings will automatically carry over.

ASUS

ASUS describes the RP-AX58 as a Wi-Fi 6 range extender with access point mode.

  • ASUS says it can be used with other Wi-Fi routers.
  • According to ASUS, AiMesh features require a compatible AiMesh router. The stated speed and coverage aren’t measurements taken in your home.

devolo

According to devolo, the Magic 2 WiFi next Starter Kit combines powerline with a Wi-Fi access point and two Gigabit LAN ports.

  • Powerline is worth considering if a wireless connection to the loft is difficult.
  • devolo says that adapters from the Magic range don’t work with older dLAN adapters. The choice of socket and electrical appliances can affect performance.

NETGEAR

NETGEAR describes the EAX15 as a Wi-Fi 6 mesh extender with a Gigabit Ethernet port.

  • The manufacturer says it can use your existing Wi-Fi name and settings.
  • The wireless connection back to the router still depends on where you place it; the stated speed isn’t a measured upload speed.

Joybuy products for loft Wi-Fi

These products cover three ways to extend Wi-Fi to a loft: powerline, a wireless repeater and an access point via Ethernet. Measure your upload speed and check the connection at the location you plan to use to find out which option suits your needs.

TP-LINK TL-WPA7517 KIT powerline adapter starter kit

TP-LINK TL-WPA7517 KIT Powerline Adapter Starter Kit

A powerline Wi-Fi kit for extending your connection over your existing mains wiring.

The product description mentions Wi-Fi and a Type E plug. Performance can vary between sockets, so test the ones where you plan to use the adapters.

Joybuy
Wi-Fi Repeater Pro Black

Wifi Repeater Pro Black

A wireless repeater for extending your existing Wi-Fi network without running a cable to the additional access point.

The product description lists 2.4 GHz, two external antennas and speeds of up to 300 Mbps. Place the repeater where it can still receive a usable signal from the router.

Joybuy
TP-Link Omada EAP653 wireless access point

TP-Link Omada EAP653

An access point for adding Wi-Fi over a wired connection, for example if you can run Ethernet to the loft.

The product information lists Wi-Fi 6, a Gigabit Ethernet port and PoE+.

Joybuy
TP-Link EAP725-Wall access point

TP-Link EAP725-Wall

An access point for adding another Wi-Fi access point via a wired connection.

The product information lists Wi-Fi 7, three Ethernet ports and PoE support.

Joybuy
TP-Link TL-WA801N access point and Wi-Fi extender

TP-Link TL-WA801N

An option if you’re choosing between an access point set-up and wireless extension; the right mode depends on the connection you’re using.

The product information lists 2.4 GHz, a LAN connection, two antennas, WPS, passive PoE and speeds of up to 300 Mbps.

Joybuy

Frequently asked questions about loft Wi-Fi

How can you tell if an extender will help with your photo upload?

First, compare a wired speed test by the router with one in the loft, then test again after installation. If the connection is already limited by the router, adding Wi-Fi won’t remove that limitation.

Where should you place a wireless repeater?

Place a repeater between the router and the loft, somewhere it can still receive a good signal from the router, rather than automatically putting it where coverage is worst. Check the signal indicator and, if necessary, move it closer to the router. If you can’t get a stable wireless connection, consider a model with access point mode and Ethernet.

Do you need to replace your old powerline adapters?

That depends on the product range. devolo says the Magic 2 WiFi next can be expanded with Magic adapters, but not with devolo dLAN adapters. Check the model names before choosing an additional adapter.

What practical terms and rights apply if the connection disappoints?

Check which adapters and cables the complete set-up requires. For most online purchases in the Netherlands, you have a statutory 14-day cooling-off period after delivery; check which exceptions apply. According to the Dutch Authority for Consumers and Markets’ ConsuWijzer, your statutory guarantee depends on what you can reasonably expect from the product and isn’t automatically limited to a manufacturer’s warranty period.

What product regulations apply to a Wi-Fi extender in the Netherlands?

Wi-Fi extenders are radio equipment, so the applicable European requirements and CE marking are relevant. The Dutch Authority for Digital Infrastructure states that stricter requirements have applied since 1 August 2025, including applicable cybersecurity requirements. Check the marking and product documentation for the exact device; a product description alone doesn’t show that it meets the requirements.