Student with weak Wi-Fi in the loft
If your study space is behind a floor or other obstacles, improving Wi-Fi coverage there is the priority. The Consumentenbond explains why the placement of Wi-Fi extenders matters.
First, test your internet connection using an Ethernet cable connected to your modem. Then check the Wi-Fi where you take your lessons. This will help you tell the difference between an issue with your connection and poor wireless coverage, as recommended by the Consumentenbond. If the Wi-Fi is particularly weak in the loft, choose between repositioning your router, adding a wired access point or getting a mesh system, depending on your available cabling and how many access points you need. A faster router downstairs won’t, by itself, guarantee coverage through floors and other obstacles.
If your study space is behind a floor or other obstacles, improving Wi-Fi coverage there is the priority. The Consumentenbond explains why the placement of Wi-Fi extenders matters.
If you share video or speak during lessons, first check whether dropouts are caused by your internet connection or your home Wi-Fi. The Consumentenbond recommends using a wired connection for a speed test.
If you want better Wi-Fi upstairs without replacing your provider’s entire network, adding a suitable access point could be an option. Ziggo explains how to connect Wi-Fi extenders by cable.
Choose this if: a test shows that your internet connection is working well, and a more central or higher position could reach your study space.
Bear in mind: a standalone router downstairs won’t automatically fix a weak signal caused by floors or other obstacles.
Choose this if: you can run a cable upstairs and want Wi-Fi coverage in a fixed study space.
Bear in mind: this solution requires a suitable cable route and a device that supports the wired mode you need.
Choose this if: running a cable upstairs isn’t practical, but there are spots between floors where the mesh nodes can still reach one another.
Bear in mind: the wireless connection between nodes still depends on their placement and any obstacles. A mesh system doesn’t guarantee coverage in every loft.
When setting up an online study space in a converted loft, your choice mainly comes down to coverage in that spot, a stable connection, keeping your provider’s modem and the size of the solution.
| What to consider | What should you look for? | Who is this most relevant to? |
|---|---|---|
| Coverage in your study space | Test the Wi-Fi in the loft and compare one extra access point with the possible positions for a mesh system. Check how many nodes are included. | I want Wi-Fi to reach my converted loft, even if a floor weakens the signal. Around 36% of consumers say coverage in their study space is their top priority when buying. |
| Stability during lessons | Compare a wired test by the modem with how the connection performs in the loft. Check whether you can connect your computer or a suitable access point by cable. | If I need video and audio during lessons, I want to know whether the problem is with my internet connection or Wi-Fi. Around 29% of consumers prioritise a stable connection for lessons. |
| Connecting to your provider’s modem | Check whether the device can work as an access point or Wi-Fi extender, and which port you need to connect it to your existing modem. | I want to keep my provider’s modem and extend the Wi-Fi upstairs. Around 21% of consumers say connecting to their existing network is their top priority. |
| Size of the solution | First work out how many access points you need and whether you can improve their placement. Also consider the energy use of equipment that stays on all the time. | I don’t want more equipment than I need for one study space, and I want to see what repositioning can achieve first. Around 14% of consumers prioritise a small, cost-conscious solution. |
A product claim doesn’t tell you how the connection will perform in your study space. Floors and other obstacles can weaken the signal.
First, test the connection where you’ll be studying. Then choose a solution based on the placement you need and the connection between access points.
A larger router or system could mean buying more equipment than you need for a single study space.
A wireless node needs a usable connection to the network itself. A wired connection could be an alternative if the floor is blocking that wireless link.
Check the connection between the planned positions and see whether you can run a cable upstairs.
The FRITZ!Repeater 1200 AX is designed to extend an existing network; it doesn’t replace your internet connection on its own.
Before buying, decide which device you want to keep and whether you need an extra Wi-Fi access point or a new router.
TP-Link offers both the Deco X50 mesh system and the Archer AX55 router. These models are designed for different network setups.
The ZenWiFi XD5 is a mesh option for placing nodes on different floors.
The FRITZ!Repeater 1200 AX is designed to extend an existing network.
The Orbi RBK763S is a kit with a router and two satellites, for situations where you need Wi-Fi in several additional areas.
These products are designed to provide Wi-Fi in several areas, with mesh systems and a wired access point for a fixed spot in the loft.
No image available
A mesh system with two units to provide Wi-Fi in several areas of your home.
The product description lists Ethernet backhaul.
No image available
An access point for a fixed Wi-Fi location where an Ethernet connection is available.
The product description lists an Ethernet port, PoE support and ceiling or wall mounting.
No image available
A mesh option for Wi-Fi in more than one area of your home.
The product name lists tri-band Wi-Fi 7 with 2.4 GHz, 5 GHz and 6 GHz. The description says two nodes are included, with the option to add compatible Velop Pro 7 nodes.
No image available
A mesh system with two units to provide Wi-Fi in several areas, with PoE support for wired installation.
The product name lists dual-band Wi-Fi 6. The description says each unit has two Ethernet ports.
No image available
A mesh system with two units to provide Wi-Fi in several areas of your home.
The product description lists three gigabit Ethernet ports per unit and optional Ethernet backhaul.
No. First, test the connection using an Ethernet cable connected to your modem to tell the difference between your internet connection and Wi-Fi. Then check the signal in your study space. Moving the router or adding an access point could be a more targeted solution.
With a wired access point, you can place it closer to the area with poor coverage. If you’re using wireless mesh, check that the node still has a usable connection to the other one. The best position varies by home and system.
If you can run a cable, you can connect your computer or a suitable access point by wire. This means that part of the connection won’t rely on Wi-Fi, but it won’t make a slow internet connection faster.
Work out how many access points you need, whether you’ll need extra materials for cabling and how much energy equipment that stays on will use. Also check what installation support your provider offers. You don’t automatically need a new router to extend your Wi-Fi.