Who is this relevant to?

Watching films with weak Wi-Fi in the loft

Your connection works downstairs, but films keep buffering in the converted loft. Compare the connection by the router with the one by your TV or media player. Walls and ceilings can interfere with the Wi-Fi signal, as the Consumers’ Association explains.

A household with a cable to the loft

You can connect a network cable upstairs and want Wi-Fi there for other devices too. In that case, your choice comes down to the connection, the ethernet ports available and whether you can use ethernet backhaul or an access point.

Several places to watch around the home

You have devices online downstairs and upstairs at the same time. Compare the connection where you watch with the speed provided by your internet connection, and look beyond the advertised Wi-Fi speed alone.

What should you consider when choosing?

Wireless mesh

When: if you can’t run a cable to the loft and still have a usable Wi-Fi signal at an intermediate location.

Trade-off: there’s no need to run a cable, but distance, positioning and floors can also affect the connection between mesh points.

Mesh with ethernet backhaul

When: if a network cable is available between the points or can be installed.

Trade-off: the wired connection between the points doesn’t use wireless capacity for that link, but installing a cable takes work. Also check the connection requirements for your chosen system.

A wired access point or a direct cable

When: if you mainly want to connect one fixed viewing spot and already have a cable there.

Trade-off: a direct cable to your TV or media player may be enough. An access point also provides Wi-Fi for other devices, but won’t automatically offer the same centralised control or roaming as a mesh system.

Check the connection where you watch and at potential locations for an intermediate point before deciding how many mesh points you need. For the exact version, also check the CE marking, country setting and applicable terms of use.

What to consider What should you check? Who should pay particular attention?
Loft coverage Check the signal where you watch and compare possible locations for an intermediate point. Check how many points are included in the exact pack. I want films to keep playing in my converted loft and mainly need a usable signal by the TV. Around 36% of consumers prioritise loft coverage.
Connection between points Check whether the system supports ethernet backhaul, which ports are available and how the points need to be connected in your chosen mode. I want to avoid the point upstairs having a weak connection to the downstairs network. Around 29% of consumers prioritise the connection between Wi-Fi points.
Streaming at the same time Check the connection by your TV or media player during normal household use. Also check whether your playback devices support the relevant Wi-Fi features. I want to watch a film while other people at home are online and need to know how the connection performs where I watch. Around 21% of consumers prioritise streaming at the same time.
Connection and existing equipment Check whether you can keep your existing router, whether older mesh points are compatible and which connections the exact system has. Also check the CE marking and the correct country setting. I want to keep my existing network and avoid choosing equipment that doesn’t suit my current setup. Around 14% of consumers prioritise compatibility with their existing equipment.

Common mistakes

  • Assuming the speed on the box is the same as film-streaming speed in the loft

    The connection at your playback device is what matters. Walls, ceilings and distance can affect Wi-Fi. A mesh system won’t increase the speed of a slow internet connection either.

    First, check the connection by the router, then check it where you watch. If necessary, repeat the test while other devices at home are online.

  • Putting a wireless point where the Wi-Fi signal is weakest

    The point needs to reach your TV, but it also needs to maintain a good connection to the network itself.

    Try an intermediate location, then check the connection in the loft. If the connection between floors is still weak, compare ethernet backhaul or a wired access point.

  • Assuming a different pack contents means it’s the same product

    The updated Techboers ranking from 21 October 2026 describes a TP-Link Deco X50 as a 2-pack. A version with three points has different pack contents.

    Before buying, compare the full model name and the number of points in the exact version.

  • Assuming mesh generations from the same brand will always work together

    Google says Nest Wifi Pro can’t be combined in a single mesh network with older Nest Wifi or Google Wifi points.

    Check the generation of your existing points and the compatibility of the exact system with additional points.

    If the generations aren’t compatible, you may not be able to keep using your existing points in the same mesh network.

Brands to consider

TP-Link

Deco systems such as the X50 are worth considering when comparing mesh with optional ethernet backhaul.

  • TP-Link lists optional ethernet backhaul for the Deco X50.
  • TP-Link describes different connection requirements for router and access point modes. Check the manual for your chosen setup.

ASUS

The ZenWiFi XD5 is worth comparing if ethernet backhaul and its settings suit your existing network.

  • ASUS describes ethernet backhaul for the XD5 when ethernet connections are available.
  • Check whether your existing devices support the Wi-Fi features you want. Advertised speeds don’t tell you what you’ll get in your loft.

FRITZ!

The FRITZ!Mesh Set 1700 is worth comparing if you’re looking for several points to use in different rooms or on different floors.

  • FRITZ! says the set contains three FRITZ!Repeaters 1700.
  • Check the version and connection to your current router. The advertised coverage doesn’t tell you what you’ll get in your loft.

NETGEAR

The Orbi RBK763S is worth considering if you’re looking at a system with a router and two satellites.

  • NETGEAR describes the RBK763S as having a dedicated router-to-satellite connection and seven gigabit ethernet ports across the complete system.
  • The stated speed and coverage don’t prove how the system will perform in a particular converted loft.

Google

Nest Wifi Pro is a Wi-Fi 6E option to compare if you need to take your existing Google Wi-Fi points into account.

  • Google lists two gigabit ethernet ports per Nest Wifi Pro router.
  • Google says Nest Wifi Pro can’t be combined in a single mesh network with older Nest Wifi or Google Wifi points.

Joybuy products

This selection includes wireless mesh systems and models listed as supporting ethernet backhaul. The right solution for you depends on factors such as your cabling options, existing router and where you watch films.

ASUS ZenWiFi BT8, tri-band Wi-Fi 7 mesh system with 2 points

ASUS ZenWiFi BT8 tri-band Wi-Fi 7 (2-pack)

A mesh system with two points for anyone looking for a tri-band setup who wants to check compatibility with their existing ASUS router.

The product name lists Wi-Fi 7 and the 2.4, 5 and 6 GHz bands. The product description mentions AiMesh expansion with compatible ASUS routers.

View at Joybuy
TP-Link Deco X20 AX1800 Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X20 AX1800 Wi-Fi 6 (2-pack)

A mesh system with two points to consider if you can use a cable between them.

The product information lists Wi-Fi 6 and ethernet backhaul. Check the connections and requirements for your chosen operating mode.

View at Joybuy
Linksys Velop Pro 7 tri-band Wi-Fi 7 mesh system with 2 nodes

Linksys Velop Pro 7 tri-band Wi-Fi 7 (2-pack)

A mesh system with two nodes to consider if you’re looking for an expandable wireless setup.

The product name lists Wi-Fi 7 and the 2.4, 5 and 6 GHz bands. The product information mentions expansion with compatible Linksys mesh devices.

View at Joybuy
TP-Link Deco X50-PoE dual-band Wi-Fi 6 mesh system, 3-pack

TP-Link Deco X50-PoE dual-band Wi-Fi 6 (3-pack)

A three-point system to consider if the pack contents and power over Ethernet suit your setup.

The product information lists Wi-Fi 6, PoE support and two ethernet ports per point.

View at Joybuy
TP-Link Deco X50 dual-band Wi-Fi 6 mesh system, 2-pack

TP-Link Deco X50 dual-band Wi-Fi 6 (2-pack)

A two-point system to consider if you want to use optional ethernet backhaul.

The product information lists Wi-Fi 6 and three gigabit ethernet ports per unit. TP-Link describes different connection requirements for router and access point modes. Check which connection method suits your setup.

View at Joybuy

Frequently asked questions

Should you upgrade your internet package if films keep buffering in the loft?

Not before you’ve checked the connection. Compare a test by the router with the connection where you watch: a slow internet connection and a weak Wi-Fi signal need different solutions. Netflix recommends at least 15 Mbps for UHD 4K on its service; other services and picture quality may have different requirements.

Where should you put an extra mesh point if you don’t have a cable to the loft?

Don’t put the point only where films keep buffering; it also needs to maintain a good connection to the previous point. Try a suitable intermediate location, then check the connection and playback speed in the loft. The Consumers’ Association notes that walls and ceilings can interfere with the signal.

Can you keep your existing router?

That depends on the system and operating mode you choose. TP-Link describes access point mode for Deco, with different cabling requirements for router mode. Check the manual for the exact system and how it connects to your current router before connecting the points.

Do you need a licence to use Wi-Fi at home in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, you don’t need a licence for home Wi-Fi when you use the designated frequencies and comply with the terms of use. Also check the CE marking for the exact version and set the correct country setting.

What should you check before choosing a mesh system for the Netherlands?

Check the CE marking, the correct country setting and that the equipment is used in line with the applicable frequency and usage requirements. The Dutch Authority for Digital Infrastructure sets out these requirements for wireless equipment and Wi-Fi.