Who is this most relevant to?

Loft room resident

Wants usable Wi-Fi coverage in a converted loft and needs to check whether an Ethernet cable can be run, or where a wireless node could still maintain a connection.

Shared network manager

Sets up Wi-Fi for housemates who are online at the same time, and considers placement, connections, management and security updates.

Housemate splitting the bill

Doesn’t want to buy more nodes or more advanced equipment than the layout and use of the house require.

What should you look for?

Wireless mesh

Choose this if: you can’t run a cable to the loft and can place an intermediate node where it still gets a good signal.

Bear in mind: floors and insulation can weaken the connection between nodes.

Mesh with Ethernet backhaul

Choose this if: there’s a usable Ethernet cable to the loft and you want to use a single managed mesh network.

Bear in mind: the cable, ports and selected operating mode need to suit your setup.

Wired access point

Choose this if: the loft is the main area with poor coverage and an Ethernet cable is available there.

Bear in mind: a single access point won’t automatically fix weak spots on other floors.

FRITZ! mesh extension

Choose this if: your home already uses a FRITZ!Box as its mesh base and you want to extend that setup.

Bear in mind: the automatic transfer of Wi-Fi settings described applies to a setup with a FRITZ!Box, not necessarily to every router.

Consideration What should you check? Who is this most relevant to?
Usable connection in the loft Check whether you can run a cable; if not, test whether an intermediate node receives a strong enough signal. If I work or study in the loft, I want a connection there without relying on a stated coverage area. Around 36% of consumers give loft coverage top priority.
Simultaneous use Compare the Wi-Fi generation and connections with the devices your housemates use. When several housemates are studying, making video calls or streaming at the same time, I want to know whether the setup is suitable for that kind of use. Around 29% of consumers prioritise shared use.
Connecting to your existing router Check the router or access point mode you need, the available ports and the update policy. If I’m keeping the router supplied by my provider, I want to know in advance how the new system connects to it and is managed. Around 21% of consumers give connection and management top priority.
Total cost and number of nodes First decide which rooms need coverage; then compare the number of nodes required and their energy use. If we want to keep the purchase and running costs down, I don’t want to add nodes that the layout doesn’t call for. Around 14% of consumers prioritise total cost.

Common buying mistakes

  • Assuming coverage figures in square metres guarantee coverage in the loft

    Floors and insulation can weaken the signal; a stated coverage area doesn’t tell you how the connection will perform in your home.

    Work out the signal route and possible node positions before deciding how many you need.

    If the connection isn’t strong enough, you may need an extra node or have to get a cable installed after all.

  • Treating the Deco X50 and Deco X50-PoE as the same model

    TP-Link lists differences in ports and PoE capabilities, so the model names don’t refer to identical connections.

    Check the full model name, number of nodes, power supply and ports included with the set on offer.

    A suitable power supply or network infrastructure may be needed for the PoE setup you want.

  • Assuming the advertised Wi-Fi speed is guaranteed for every housemate

    The Wi-Fi version alone doesn’t determine performance; placement, connected devices and the connection between mesh nodes also play a part.

    Compare the setup and available independent performance tests, not just the combined speed shown on the box.

Brands to consider

TP-Link

The Deco X50 range offers Wi-Fi 6 mesh; the X50-PoE is a separate model for setups with suitable cabling.

  • TP-Link lists three gigabit ports per Deco X50 node and support for Ethernet backhaul.
  • According to TP-Link, the X50-PoE has one 2.5-gigabit port and one gigabit port per node. Don’t confuse it with the Deco X50.
  • Manufacturer coverage figures aren’t a measurement of performance in a specific converted loft.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh system that lets you configure settings such as the network name and, if required, a wired connection between nodes.

  • ASUS describes Ethernet backhaul as an option when Ethernet connections are available.
  • ASUS notes a possible regional restriction on 160 MHz; check the applicable setting and the exact version of the pack.
  • An advertised combined speed isn’t the same as the speed you’ll get at home.

FRITZ!

The FRITZ!Repeater 3000 AX is particularly suited to extending an existing FRITZ!Box setup, but can also be used with other routers.

  • FRITZ! describes three frequency bands, two gigabit LAN ports and a LAN connection to a FRITZ!Box.
  • The automatic transfer of Wi-Fi settings described applies when used with a FRITZ!Box and doesn’t necessarily work with every router supplied by an internet provider.

Joybuy products

This selection includes mesh systems designed to connect multiple rooms or floors, with models that offer wired backhaul, wireless mesh or both. Before buying, check that the version on offer has the correct CE marking.

TP-Link Deco BE68 mesh system, 2-pack

TP-Link Deco BE68 (2-pack)

A mesh system with two nodes for a shared network; the product description mentions both wired and wireless backhaul.

Wi-Fi 7, tri-band and MLO.

Ports: 10 Gbps, 2.5 Gbps and 1 Gbps.

View at Joybuy
ASUS ZenWiFi BT8 mesh system, 2-pack, tri-band Wi-Fi 7

ASUS ZenWiFi BT8 (2-pack)

A mesh system with two nodes for connecting multiple rooms.

Tri-band Wi-Fi 7; the product description mentions AiMesh and a guest network.

The description lists 2.5-gigabit Ethernet ports.

View at Joybuy
TP-Link Deco X50 mesh system, 3-pack, dual-band Wi-Fi 6

TP-Link Deco X50 (3-pack)

A Wi-Fi 6 mesh system with three nodes; the product description lists Ethernet backhaul as an option.

Three gigabit ports per node.

The product description mentions the Deco app and a guest network.

View at Joybuy
Linksys Velop Pro 7 mesh system, tri-band Wi-Fi 7

Linksys Velop Pro 7 (2-pack)

The product description lists two mesh nodes and management via the Linksys app.

Tri-band Wi-Fi 7.

The description lists gigabit and 2.5-gigabit Ethernet ports, and the option to expand the system with compatible mesh devices.

View at Joybuy
TP-Link Deco X50-PoE mesh system, 2-pack, dual-band Wi-Fi 6

TP-Link Deco X50-PoE (2-pack)

A Wi-Fi 6 mesh system with PoE support, for a setup with a suitable power supply and cabling.

Two Ethernet ports per node, according to the product description.

The product description also mentions a guest network.

View at Joybuy

Frequently asked questions

Where should you start if only the loft has poor Wi-Fi?

First, check whether you can run an Ethernet cable to the loft. You can then connect an access point or compatible mesh node there without relying on Wi-Fi for the connection between floors. If you can’t run a cable, a wireless intermediate node needs to receive a strong enough signal.

Can you use your own mesh router alongside or instead of your provider’s router?

The Netherlands Authority for Consumers and Markets (ACM) describes the freedom to choose your own router, but the right setup and settings depend on your provider’s connection and the instructions for the system you choose. Check how the mesh system connects to your existing router, and keep your equipment up to date.

Do you need a permit or registration to use Wi-Fi in a Dutch student house?

According to the Dutch Authority for Digital Infrastructure, ordinary Wi-Fi use in the Netherlands does not require a permit, notification or registration, as long as you comply with the conditions for the frequency bands used. The equipment itself must have the correct CE marking.

What are your rights if a mesh system bought online isn’t suitable or breaks down too soon?

For a standard online product purchase, you generally have a statutory cooling-off period of up to 14 days after delivery. This is separate from your statutory guarantee: if a product is faulty, your rights depend on what you can reasonably expect from it under normal use. In the Netherlands, there isn’t simply a fixed two-year limit.

Do you need to buy Wi-Fi 7 for a house shared by several students?

Not necessarily. The Consumers’ Association (Consumentenbond) generally recommends Wi-Fi 6 for most users, while Wi-Fi 7 is mainly for those with more demanding requirements. Also compare the connection between nodes and their placement, as the Wi-Fi version alone doesn’t determine how well the network will work in the loft.