Who is this buying guide for?

Home worker with an Ethernet cable to the loft

Needs a wired connection for work, as well as Wi-Fi in the loft rooms. An access point or wired mesh point can connect to the existing cable.

Homeowner without an Ethernet cable

Wants Wi-Fi in both loft rooms without installing a cable. A wireless mesh point still needs a usable connection to the network where it is placed.

Homeowner with a weak signal through the floor

Has obstacles between the router and the loft and, if installing a cable isn’t an option, also wants to check whether powerline works with the electrical installation.

What should you look for in loft Wi-Fi?

First decide how the network will reach the loft. Then work out whether an access point, mesh system or powerline is right for your home connection.

What to consider What to look for when buying Who should pay particular attention?
Reliable working in the loft Check whether Ethernet reaches the loft and whether the extra access point needs a power supply. If I need a reliable connection while working, I’ll first look at a cable route and a suitable spot for Wi-Fi. Around 36% of consumers prioritise a reliable connection for work.
Wi-Fi in both rooms without a cable Test a midway location with a signal, and check the connection in both loft rooms. If you don’t want to install a cable, you’ll need a mesh point that still has a good connection to the network. Around 29% of consumers prioritise cable-free coverage.
Keeping your existing router Check the LAN connection, the selected mode and any model-specific mesh compatibility. If I need to keep my existing router, I’ll want to know whether an extra point will work with it and how it needs to be connected. Around 21% of consumers mainly want to keep their existing router.
A difficult connection through the floor Test powerline adapters in the intended wall sockets and check the connection there. If the wireless connection through the floor isn’t good enough and installing a cable isn’t possible, I’ll look for another way to connect the floors. Around 14% of consumers prioritise avoiding this tricky wireless route.

Common buying mistakes

  • Assuming a higher Wi-Fi speed guarantees better coverage

    The Wi-Fi standard alone doesn’t tell you how well the connection will work in the loft. Obstacles and the position of the router also matter.

    First, test the connection using an Ethernet cable, then check Wi-Fi in both loft rooms. Only choose a solution after that; this helps you avoid replacing equipment that still works.

  • Putting a wireless mesh point where there’s no signal

    The extra point also needs to connect to the existing network. Without a usable signal where it’s placed, it won’t automatically solve the problem in the loft room.

    Test a midway location. If there’s an Ethernet cable available there, see whether a wired connection between the network points would work.

  • Treating powerline as a guaranteed Ethernet connection

    According to devolo, transmission over the mains can be affected by certain sockets and electrical devices.

    Test the adapters in the sockets you plan to use and check the connection in the loft rooms. Testing or moving the adapters may take extra time.

  • Forgetting that an access point needs power

    The official specification for the UniFi U6+ lists PoE power. You’ll therefore need to include a suitable power source in your setup.

    Before buying, check the Ethernet route and the power supply needed for the exact model. You may need a suitable PoE power source.

Brands to compare

TP-Link

Deco offers mesh options with wireless or wired connections between the units. For the PX50, TP-Link also describes a connection via the mains socket.

  • According to TP-Link, Deco switches to the cable when using standard Ethernet backhaul. The connection method also depends on whether you’re using router or access point mode.
  • The description of powerline for the PX50 doesn’t confirm how well that connection will work in a particular home.

ASUS

The ZenWiFi XD5 is a mesh option for which ASUS also describes Ethernet backhaul between the hubs.

  • According to ASUS, the Wi-Fi bands remain available for wireless devices in a wired setup.
  • ASUS lists conditions for Wi-Fi 6 features. Also check which version of the set you’re choosing.

FRITZ!

The FRITZ!Repeater 1200 AX is a targeted extension to consider if you already have a FRITZ!Box at home.

  • According to FRITZ!, the model has one gigabit LAN port and can also work with other routers.
  • The automatic transfer of Wi-Fi settings described applies when connecting to a FRITZ!Box.

Ubiquiti

The UniFi U6+ is an access point to consider if Ethernet reaches the loft.

  • The official specification lists gigabit Ethernet and PoE power.
  • Check the required power supply and installation in advance. An access point isn’t a standalone wireless mesh replacement if there’s no cable available.

devolo

According to devolo, Magic powerline products use the electrical wiring as a route when installing a cable or getting a wireless connection is difficult.

  • Powerline can be an alternative to try for a network connection at home via the mains.
  • devolo warns that certain sockets and electrical devices can affect data transmission. Test the connection where you plan to use it.

Products for loft Wi-Fi

These Joybuy products include mesh systems, a powerline kit and wired access points for extending Wi-Fi in the loft. When buying wireless equipment in the Netherlands, check that the device supplied carries the mandatory CE marking; the Dutch Authority for Digital Infrastructure describes this marking as compulsory.

TP-Link Deco BE68 mesh system with two units

TP-Link Deco BE68 (2-pack)

A mesh system for extending Wi-Fi to several rooms. According to the product description, the units can connect either by cable or wirelessly.

The product description lists several WAN/LAN ports per unit. Check that the setup you choose works with your existing router and any cable to the loft.

Joybuy
ASUS ZenWiFi BD4 dual-band mesh product, Wi-Fi 7, white

ASUS ZenWiFi BD4, dual-band Wi-Fi 7, white

A mesh option for extending coverage to several rooms; the product description lists wired backhaul.

The listed bands are 2.4 GHz and 5 GHz. Check that the version of the set and its wired connection options suit your network setup.

Joybuy
TP-Link TL-WPA7517 powerline adapter starter kit with Wi-Fi

TP-Link TL-WPA7517 powerline starter kit

An option to try for extending your network over the existing electrical wiring if a wireless connection isn’t good enough and installing Ethernet isn’t practical.

Performance can depend on the sockets and electrical devices in your home. Test the connection where you plan to use the adapters.

Joybuy
TP-Link Deco M4 mesh system with three dual-band units

TP-Link Deco M4 (3-pack), dual-band

A mesh system with three stations for Wi-Fi in several rooms; the product description lists one wireless network.

The listed Wi-Fi bands are 2.4 GHz and 5 GHz, and the Wi-Fi generation is Wi-Fi 5 (802.11ac). Check reception in the intended locations; the number of stations alone doesn’t determine how well the signal reaches both loft rooms.

Joybuy
TP-Link Omada EAP613 wireless access point

TP-Link Omada EAP613 access point

An access point to consider if Ethernet reaches the loft and you need Wi-Fi there.

The product description lists power via 802.3at PoE, passive PoE or DC. Check in advance which power source your installation requires.

Joybuy

Frequently asked questions

How can you tell whether you have a Wi-Fi problem or an issue with your internet connection?

First, test the connection using a computer connected with an Ethernet cable. If it’s repeatedly much slower than promised, contact your provider; an extra Wi-Fi point won’t fix a problem with your internet connection.

How do you connect Deco points by cable to an existing router?

Follow the instructions for the mode you’ve selected. According to TP-Link, a satellite in router mode connects behind the main Deco; in access point mode, other connections described by TP-Link are also possible. Check in the app that Ethernet backhaul is active.

What ongoing costs should you compare?

As well as the purchase price, compare the electricity used by points that are always on and any costs for a solution from your provider. The actual cost depends on the equipment you choose and how long you use it.

Can you use your own router in the Netherlands instead of your provider’s?

According to ACM ConsuWijzer, you’re free to choose your router in the Netherlands. Additional connection and safety requirements may apply if you use your own modem; ask your provider for the necessary settings and keep the device up to date.

Do you need a licence or registration to use Wi-Fi at home?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi can be used on the designated frequencies without a licence, notification or registration. Use equipment in line with the applicable conditions and check that it carries the mandatory CE marking.