Can you run an Ethernet cable to your converted loft? If so, first compare a wired access point with a mesh node using Ethernet backhaul. If you’re having problems between floors, the connection to the loft matters more than a router’s higher advertised speed. If you can’t run a cable, wireless mesh may be an option, as long as an intermediate node can still get a good connection to the rest of your network. Also check that your video source and playback device can communicate over your home network, and decide whether you want to keep your existing provider equipment.
Who is this guide for?
Families with weak Wi-Fi in the loft
You want to watch family videos in the loft, but the connection between floors keeps dropping out. First, work out whether you need an extra Wi-Fi point and whether you can connect it by cable. Ziggo describes a wired connection as one way to extend Wi-Fi coverage.
Families who can run a network cable
You can run a cable to your converted loft and want to know whether an access point or mesh node can be connected to it. Compare the available ports and modes on the equipment; TP-Link and ASUS, for example, describe Ethernet backhaul for mesh setups.
Families with videos on a home server
You might store videos on a NAS and want to play them in the loft. Check that the source and playback device can communicate over your home network, and bear network security in mind. Synology describes streaming media files from a NAS to compatible devices.
What should you look for?
Start with the connection between your router and the loft. Then consider how the equipment will connect to your current network, how you’ll access your videos, and what equipment or cabling you’ll need.
| What to consider |
What to look for when buying |
Who is this important for? |
| Wi-Fi coverage in the loft |
Compare the number of Wi-Fi points and where they can be placed; check the connection where you watch videos. |
If Wi-Fi drops out between floors, I want to know whether an extra point will reach the loft. Around 31% of consumers say loft coverage is their main consideration. |
| Reliable video playback |
Check whether a point can be connected via Ethernet, and where the cable, any switch and the power supply will go. |
If I want to play videos in the loft, I’d prioritise a reliable connection over a cable-free setup. Around 25% of consumers put reliable video playback first. |
| Compatibility with existing equipment |
Make a note of your current router and check the access point mode and connection method supported by the system you choose. |
If my current router still does the job, I’d rather add something compatible than replace the whole network. Around 19% of consumers care most about compatibility with their existing equipment. |
| Access to family videos |
Check your network setup, compatibility between the source and playback device, and whether security updates are available. |
If my videos are stored on a home server, I want my playback devices to be able to access them and the network to stay up to date. Around 13% of consumers prioritise access to and security of their videos. |
| Purchase and upkeep |
Compare the equipment you already have with the number of points you need, any cabling required and support for your internet connection. |
If I only want to buy what my network still needs, I’ll compare my existing equipment with the additions first. Around 12% of consumers focus mainly on purchase and upkeep costs. |
Common buying mistakes
-
Assuming an advertised Wi-Fi speed or coverage area guarantees a signal in the loft
Wi-Fi in the loft also depends on your home and the route between Wi-Fi points. Ziggo lists insulation and concrete floors among the factors that can slow Wi-Fi down.
Choose based on the connection to the loft, and check it where you plan to watch videos.
-
Putting a wireless mesh node where the Wi-Fi signal already drops out
A wireless node relies on its position to connect to the rest of the network. If there’s no usable signal where you place it, that can limit the new node too.
Find a spot where the node can still connect to the network, or compare a wired connection.
-
Not checking local video access when changing your setup
To play local media files, the source and playback device need to be able to communicate over your home network. Changes to your network setup can affect this.
Test your own video source and playback device before removing your old setup.
Brands to compare
TP-Link
The Deco X50 is a mesh range that lets you compare wireless placement with a setup that can use Ethernet backhaul.
- TP-Link lists three gigabit ports per Deco X50 unit and optional Ethernet backhaul.
- Advertised speeds and coverage are product specifications, not measurements taken in your home. Also check that the pack size you choose suits your plan.
ASUS
The ZenWiFi XT9 is worth considering if you want to compare a mesh system with router or access point mode and a wired connection.
- ASUS lists an access point mode, one 2.5G WAN port and three gigabit LAN ports for the XT9.
- ASUS’s Ethernet backhaul instructions specify conditions for connecting via a switch; specifications alone can’t predict Wi-Fi performance in your loft.
NETGEAR
The Orbi RBK763S is a router with two satellites, designed for comparison with other multi-point setups.
- NETGEAR lists a dedicated connection for communication between the router and satellites, and seven gigabit ports in the set.
- Advertised coverage and device capacity aren’t guaranteed for a particular home or loft.
FRITZ!
The FRITZ!Mesh Set 4200 is worth comparing if you want to extend Wi-Fi from an existing router; the version described is a three-point set.
- FRITZ! lists three FRITZ!Repeater 3000 AX points, use with an existing router and automatic updates.
- Check whether your home needs three points. The stated 4,2 Gbit/s is a product specification, not a measured video performance figure.
Ziggo
For existing Ziggo customers, extending coverage with the provider’s boosters could be an alternative to a new router system.
- Ziggo explains how its SmartWifi modem and boosters work together, and recommends a wired connection in situations such as homes with concrete floors or lots of devices.
- Support and terms depend on your package and equipment; this information doesn’t tell you whether the solution will work with another internet provider.
Joybuy products for loft Wi-Fi
This selection includes mesh systems for extending Wi-Fi and a wired access point for anyone who wants to keep their existing router. Compare the number of points, connection options and compatibility with your own network.
No image available
TP-Link Deco X20 AX1800 mesh Wi-Fi system, 2-pack
Designed to extend Wi-Fi coverage with two Deco X20 units; Ethernet backhaul is listed for a wired connection between the units.
Wi-Fi 6. Two units.
View at Joybuy
No image available
TP-Link Omada EAP653 wireless access point
Designed to add a wired access point to an existing network setup.
Wi-Fi 6, one gigabit Ethernet port and PoE+ support. Wall or ceiling mounting is listed.
View at Joybuy
No image available
TP-Link Deco XE75 Pro mesh system, 3-pack
Suitable if you want to place several mesh points and compare the wired connections available on each unit.
Tri-band Wi-Fi 6E (2.4 GHz/5 GHz/6 GHz), three nodes and, per unit, two gigabit ports plus one 2.5-gigabit port.
View at Joybuy
No image available
TP-Link Deco XE75 mesh system, 3-pack
Suitable if you want to extend Wi-Fi to several areas and compare the Ethernet ports available on each unit.
Tri-band Wi-Fi 6E. Three gigabit Ethernet ports per unit.
View at Joybuy
No image available
TP-Link Deco X50 mesh system, 2-pack
Designed to extend Wi-Fi with two mesh units; optional Ethernet backhaul is listed for a wired connection between the units.
Dual-band Wi-Fi 6 (2.4 GHz/5 GHz). Three gigabit Ethernet ports per unit.
View at Joybuy
Frequently asked questions
Do I need to replace my router to watch family videos in the loft?
Not necessarily. If the main issue is a weak connection between floors, you could first compare options for adding a Wi-Fi point. Ziggo recommends a wired connection in situations such as homes with tricky layouts; check whether you can run a cable to the loft.
Can I use a mesh system alongside my current modem router?
It depends on the system and your network setup. ASUS, for example, lists an access point mode for the ZenWiFi XT9. Check the instructions for your equipment and how it connects to your provider’s router.
Why can’t the TV in the loft find my videos?
First, check that the video source and TV can communicate over your home network, and that the TV can play the media format you’re using. Synology describes streaming media files from a NAS to compatible devices; a new router won’t automatically fix a network setup or compatibility issue.
What upkeep does my own router need?
Check for security updates, enable automatic updates if possible, and use a strong password. VeiligInternetten gives this as security advice; it doesn’t set a legal update frequency for this purchase.
Can I use my own router in the Netherlands?
Yes. ACM ConsuWijzer explains that you can choose your own router in the Netherlands. Technical and security requirements may apply when connecting to your provider’s network, so ask which settings you’ll need and check that the equipment is compatible with your connection.