For family videos in a converted loft, the right way to extend your network depends on where the connection is failing. First, compare your Wi-Fi in the loft with a wired test next to the router. If you can run a cable upstairs, consider a wired access point or a mesh node with Ethernet backhaul. Without a cable, your choice between a repeater and powerline depends on whether there’s a good signal at an intermediate point or a reliable connection through your electrical wiring. The Consumers’ Association (Consumentenbond) recommends connecting a computer to your home network with an Ethernet cable to run a speed test. The stated Wi-Fi speed alone won’t tell you how well videos will play in the loft.
Who is this advice for?
A family with videos buffering in the loft
Wants to check first whether poor coverage in the converted loft is the cause, and is looking for a connection that works reliably up there. The Consumers’ Association recommends placing Wi-Fi points where you need the signal.
A family with several rooms with weak coverage
Wants to reach other rooms as well as the loft. So look at the number of points, how they connect to each other and whether they’re compatible with your router.
A family without a practical cable route
Can’t run an Ethernet cable to the loft and is comparing a wireless point placed where there’s a signal with a powerline connection through the electrical wiring.
What should you look for?
Test your connection first, then decide whether a single wireless point, a wired connection or several network points will suit the layout of your home.
| What to consider |
What to look for when buying |
Who might find this more important? |
| A reliable connection to the loft |
Check where a wireless intermediate point can still get a signal, and whether you can run Ethernet upstairs. |
If videos mainly buffer in the loft, I want to know whether the extra point itself can maintain a connection to the router. Around 36% of consumers prioritise a reliable connection to the loft. |
| Coverage in several rooms |
Work out how many rooms need coverage and check that the router and points support the mesh features you want to use together. |
If we want to watch videos in different rooms, I look at the number of points and how they connect. Around 29% of consumers are most concerned about coverage in more than one room. |
| Setting up without a network cable |
Compare wireless repeating from a spot with a signal against powerline through suitable sockets, and check which adapters you already have. |
If I can’t run Ethernet to the loft, I want to know which connection option will work in my home. Around 21% of consumers prioritise an installation without a network cable. |
| A larger-than-needed or unnecessary extension |
Run a wired test next to the router and compare it with the connection in the loft. Then work out how many points and connections you actually need. |
If I don’t yet know what’s causing the problem, I want to avoid buying equipment that won’t fix it. Around 14% of consumers mainly want to identify the cause and the size of the solution they need first. |
Common mistakes when choosing
-
Assuming a high stated Wi-Fi speed means videos will play well in the loft
Your connection where you use it also depends on distance, obstacles and the link between the extra point and the router. So a high speed rating alone won’t tell you what to expect in the loft.
First, run a wired test next to the router and compare it with the connection in the loft. Then assess the placement and connection route.
-
Assuming every repeater creates a single mesh network with every router
ASUS AiMesh requires a compatible router. TP-Link’s documentation also describes different mesh methods for RE705X hardware versions 1.0 and 2.0: OneMesh and EasyMesh respectively.
Before buying, check your router model, the exact hardware version and the mesh method it supports. You may need to change your router or system if you want to use a specific mesh feature.
-
Choosing a powerline extender based on the brand alone
According to devolo, Magic adapters aren’t compatible with dLAN or HomePlug AV products.
Check the model names of any adapters you already have, and test the connection using the sockets you plan to use.
Relevant brands to compare
TP-Link
The options described range from the RE705X extender to Deco X50 mesh units.
- According to TP-Link, the RE705X has a gigabit port for access point mode. TP-Link says Deco X50 units support optional Ethernet backhaul.
- The RE705X’s mesh method varies by EU hardware version: the documentation lists OneMesh for version 1.0 and EasyMesh for version 2.0.
ASUS
According to ASUS, the RP-AX58 can be used as a repeater or access point, or as a node with a suitable AiMesh router.
- ASUS says the RP-AX58 can extend coverage with many other routers.
- AiMesh requires a compatible router. The stated maximum speed and coverage won’t tell you how well the connection will perform in your loft.
devolo
The Magic 2 WiFi 6 next Starter Kit is a powerline option with Wi-Fi for a floor that’s difficult to reach wirelessly.
- According to devolo, this set uses the electrical wiring for the network connection, and the Magic range can be expanded.
- devolo says Magic doesn’t work with dLAN or HomePlug AV adapters. Test the connection in the sockets you plan to use.
Joybuy products for mesh and powerline
This selection includes mesh systems for several areas of the home and a Wi-Fi powerline starter kit. First, test which connection route suits your loft, and check that the exact version you’re buying has the required CE marking.
No image available
TP-Link Deco BE68 (2-pack)
Worth considering if you want to use a mesh network in several areas of your home.
The description lists two units and support for wired or wireless backhaul.
For each unit, the description lists 10 Gbps, 2,5 Gbps and 1 Gbps ports, plus Multi-Link Operation (MLO).
Joybuy
No image available
TP-Link Deco E4 (3-pack)
Worth considering if you need several Deco units for a mesh network.
The set is described as dual-band Wi-Fi 5 (802.11ac), with 2,4 GHz and 5 GHz.
The description lists three stations and two Ethernet ports per unit.
Joybuy
No image available
TP-LINK TL-WPA7517 KIT powerline starter kit
Worth considering if you want to combine a network connection through your electrical wiring with Wi-Fi.
The product description lists a powerline starter kit with Wi-Fi and support for standards including 802.11ac.
Test the connection using the sockets you plan to use, and check compatibility with any existing adapters.
Joybuy
No image available
TP-Link Deco M4 (3-pack)
Worth considering if you’re looking for three mesh stations for several areas of your home.
The description lists Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.
The Deco units are described as a mesh network that you set up and manage using an app.
Joybuy
No image available
TP-Link Deco X50 (3-pack)
Worth considering if you want to set up a mesh network with three points.
The product description lists Wi-Fi 6 (802.11ax) and three gigabit ports per unit.
According to TP-Link, the Deco X50 supports optional Ethernet backhaul.
Joybuy
Frequently asked questions
Should you upgrade your broadband package if videos buffer in the loft?
Not until you’ve identified the cause. The Consumers’ Association recommends running a speed test on a computer connected to your home network with an Ethernet cable. Compare that result with the connection in the loft. If your videos are stored locally, an internet speed test alone won’t tell you anything about the connection to the video source.
Can you put a repeater in the loft where there’s no Wi-Fi signal now?
For wireless repeating, the repeater itself still needs to be able to connect to the router. So choose a spot between the router and the loft where there’s a usable signal. If you can run a cable to the loft, access point mode is another option.
Will an ASUS RP-AX58 work as an AiMesh point with any router?
No. According to ASUS, AiMesh requires a compatible router. ASUS does say that the RP-AX58 can extend coverage with many other routers, but check which uses are supported with your router.
Can a devolo Magic adapter work with older dLAN adapters?
No. According to devolo, Magic adapters aren’t compatible with dLAN or other HomePlug AV products. Check the model names of any adapters you already have before choosing an extension.
Do I need a licence to use Wi-Fi in the loft in the Netherlands?
According to the Dutch Authority for Digital Infrastructure (Rijksinspectie Digitale Infrastructuur), Wi-Fi can be used on the designated licence-exempt frequencies without a licence, notification or registration. The relevant conditions of use and product requirements still apply. Radio equipment that meets the relevant requirements must carry a CE marking; check the marking on the exact version you’re buying.