Who is this relevant to?

Archive user with a weak signal in the loft

Your connection works near the router but not well in the loft. The first question is whether there’s enough signal left in an intermediate location for a repeater.

Manager of a permanent archive location

You could run a cable to the loft and use a Wi-Fi access point there, without relying on a wireless connection passing through the floor.

Manager of shared access

Several members or devices use the network, so you’ll want to consider router compatibility, access settings and updates when making your choice.

What should you consider when choosing?

Standalone wireless repeater

A good choice if: you want to reach one weak spot and can place the repeater somewhere the router still provides a usable signal.

Trade-off: a weak wireless signal where you place the repeater remains a bottleneck; an advertised Wi-Fi speed doesn’t predict the speed you’ll get at the archive.

Wired access point

A good choice if: there’s an Ethernet cable to the loft, or you can install one, and you want to provide Wi-Fi there.

Trade-off: you’ll need a cable and a model with AP mode, but you won’t depend on a wireless signal passing through the floor.

Mesh system or mesh point

A good choice if: coverage is poor in several areas or you want to expand a mesh system that’s confirmed to be compatible.

Trade-off: the combination with your existing router and product range needs to be compatible; an additional mesh point may also mean another network device.

Powerline with Wi-Fi access point

A good choice if: running a cable is difficult and there are sockets at both ends where you can test the connection.

Trade-off: electrical interference can affect the connection; also check that the adapter kit is compatible with your existing powerline product range.

Consideration What to check before buying Who is this most relevant to?
Coverage to the loft Test possible intermediate locations and check whether the model has a signal indicator. If you mainly want to reach one weak spot in the loft, the signal quality where you place the repeater matters. Around 33% of consumers make coverage their top priority.
Reliable archive access Compare the connection near the router with the one in the loft. Also check whether the archive is accessible over the internet or a local network. If you want to open files without interruptions, it’s important to know where in the connection the problem lies. Around 27% of consumers give reliable archive access top priority.
Compatibility with your router Make a note of your router model and separately check compatibility with the mesh features you want. If you want the extender to work with your existing network, you’ll need to know which features your router and chosen model have in common. Around 20% of consumers put router compatibility first.
Security and shared access Check how updates are provided for the hardware version, and test archive permissions using an intended user account. If several members need access, you’ll want to make sure only the right accounts can access the archive and that your network equipment is kept up to date. Around 13% of consumers make secure shared access their top priority.
Purchase and running costs Compare everything included in the kits and take into account any cable installation and the stated power consumption. If you want to weigh up the cost of the complete solution, don’t compare a single adapter with a full kit. Around 7% of consumers put total running costs first.

Common buying mistakes

  • Placing the repeater where the signal is weakest

    A repeater still needs to receive a usable connection from the router. If you place it in the room where the signal has already dropped out, the connection to the router may remain the limiting factor.

    First, try an intermediate location and check the signal indicator there. If a stable wireless connection isn’t possible, look into another type of connection.

  • Assuming the Wi-Fi speed on the box is the same as the archive speed

    The stated Wi-Fi speed isn’t a measure of the connection you’ll get in the loft. The router connection, obstacles and route to the archive storage can all have an effect too.

    Test the connection in the intended location using the devices and archive access you’ll actually use.

  • Choosing a powerline adapter without checking the kit and existing equipment

    A starter kit may include several adapters. devolo Magic adapters don’t work with existing devolo dLAN adapters, and electrical equipment can affect transmission over the mains.

    Check what’s included in the kit, which product range you already use and whether the connection works through the sockets you’ve chosen.

  • Assuming that extending your Wi-Fi will also provide archive access

    An additional network point extends your coverage, but it doesn’t automatically give users the right permissions for the archive storage.

    After installation, test access using an intended user’s account and keep your network equipment’s security updates up to date.

Brands to consider for these connection options

TP-Link

The RE305 and RE505X illustrate the difference between an AC1200 repeater and a Wi-Fi 6 repeater with AP mode. The manufacturer describes both as options for a weak spot or a wired connection.

  • TP-Link says both models have a signal indicator and AP mode; the RE505X also has a Gigabit Ethernet port.
  • The OneMesh feature described requires a compatible OneMesh router. The stated features aren’t measurements of the connection in your loft.

FRITZ!

The FRITZ!Repeater 1200 AX is a Wi-Fi 6 option to consider if you already use a FRITZ! network.

  • The manufacturer lists one Gigabit LAN connection and LAN use with a FRITZ!Box. Use with other routers is also mentioned.
  • Don’t assume every router combination offers the same mesh features; check the capabilities of your network.

ASUS

The RP-AX58 is worth considering if you’re weighing up repeater use against a wired access point.

  • ASUS describes an AP setting via Ethernet and AiMesh with a compatible router.
  • According to the manufacturer, 160 MHz may not be available in some regions. Advertised wireless speeds aren’t a measure of the connection in your loft.

devolo

Magic 2 WiFi 6 next is a powerline alternative if installing a cable is difficult and the wireless signal between the router and the loft is too weak.

  • According to devolo, the starter kit contains two adapters and the Wi-Fi access point has two Gigabit ports.
  • The manufacturer says electrical interference can affect transmission. Magic isn’t compatible with existing dLAN powerline adapters.

NETGEAR

The EAX15 range is a Wi-Fi 6 repeater option to compare with your existing router.

  • NETGEAR lists a Gigabit Ethernet port for the EAX15 and says it can be used with existing Wi-Fi.
  • The manufacturer also lists variant information, including EAX15v3. So check the exact hardware version before attributing features to a particular model.

Products for different connection options

These Joybuy products cover mesh expansion, a wired access point and powerline. Choose the option that suits the connection available in your loft.

TP-Link Deco BE68 2-Pack mesh system

TP-Link Deco BE68 2-Pack

A mesh kit to consider if you want to extend coverage in several areas.

The product description lists two mesh units, Wi-Fi 7 and three WAN/LAN ports per unit.

View at Joybuy
TP-Link Deco E4 3-pack mesh system

TP-Link Deco E4 3-pack

A kit with several mesh units to extend Wi-Fi throughout your home.

The product description lists Wi-Fi 5 (802.11ac) and two Ethernet ports per unit.

View at Joybuy
Ubiquiti UniFi AP U7 Long-Range access point

Ubiquiti UniFi AP U7 Long-Range

An access point to consider if you can use a wired Ethernet connection to the loft.

The product description lists Wi-Fi 7, a 2.5 Gigabit Ethernet uplink and PoE+ power. A compatible PoE+ (802.3at) power supply is required.

The description mentions ceiling or wall mounting and management through UniFi Network.

View at Joybuy
TP-Link TL-WPA7517 KIT powerline Wi-Fi starter kit

TP-Link TL-WPA7517 KIT

A powerline Wi-Fi starter kit to consider if installing a cable is difficult and you can test the connection through the mains at the intended sockets.

The product title identifies it as a starter kit; the description mentions extending Wi-Fi through existing electrical wiring.

View at Joybuy
TP-Link Deco M4 3-pack mesh system

TP-Link Deco M4 3-pack

A mesh kit with several units to extend Wi-Fi coverage throughout your home.

The product description lists Wi-Fi 5 and two Gigabit Ethernet ports per unit.

The description mentions set-up and placement through the Deco app, and roaming between units.

View at Joybuy

Frequently asked questions

Where should you place a wireless repeater?

Place a repeater between the router and the loft, somewhere it can still receive a good connection. TP-Link recommends placing it closer to the router when there are obstacles; if a stable wireless connection isn’t possible, AP mode via Ethernet may be an alternative.

Why might a repeater not help if the archive is slow to open?

A repeater won’t necessarily help if the connection is already slow near the router or if the problem lies with access to the archive storage. Consumentenbond recommends connecting a computer to your home network with a network cable for a speed test; also check the route to the archive.

What should you do after installation?

Check for firmware updates for your router and repeater, set a strong administrator password and test the intended archive access. VeiligInternetten recommends keeping network devices up to date and changing default passwords.

What are your rights if there’s a problem after purchase?

For a consumer purchase in the Netherlands, a product must be of satisfactory quality and the seller is your point of contact if it’s faulty. The Dutch government doesn’t specify a fixed statutory guarantee period; many qualifying online consumer purchases also come with a 14-day cooling-off period. Check whether the club is buying as a consumer or as an organisation, as these consumer rules don’t necessarily apply to every business purchase.

Do you need a licence for standard Wi-Fi in the Netherlands?

According to the Dutch Authority for Digital Infrastructure, Wi-Fi is exempt from licensing requirements and doesn’t require notification or registration, whether for private or business use. The device must still have the correct CE marking; check this on the specific item you’re buying.