Who is this mesh Wi-Fi setup for?

Loft reader with a weak signal

Your downloads work elsewhere in the house, but the Wi-Fi in your converted loft is patchy. You want to find out where an extra Wi-Fi node could still get a good connection.

Someone who can run a cable

You can run a network cable upstairs and want to work out whether wired mesh or a single access point would suit your rooms better.

Someone with an existing router

You want to keep your current router and are looking for an extension that works with its connections and network mode.

What should you look for in loft mesh Wi-Fi?

Start by identifying where the signal is weak, then work out how the Wi-Fi node will connect to the rest of your network. This will help you decide whether you need a mesh system or whether a cable and a single access point will do the job.

What to consider What to look for when buying Who is this important for?
Wi-Fi coverage in the loft Test the spot where you read and possible locations for Wi-Fi nodes; choose the number of nodes based on weak spots and the layout. I want to download digital magazines in my converted loft and need to know whether the signal there is usable. Around 36% of consumers put loft coverage first.
Connection between nodes Check whether you can run a cable upstairs and whether the exact system supports ethernet backhaul. If not, test whether an intermediate location receives a strong enough signal. If I can run a cable upstairs, I want to know whether the nodes can be connected that way; without a cable, I need to find a spot where the wireless signal still reaches. Around 29% of consumers prioritise the connection between Wi-Fi nodes.
Connection to your existing router Check the LAN ports, the available router or access point mode, and any requirements for brand-specific mesh features. I want to keep my current router and need to know in advance how the new equipment will connect to it. Around 21% of consumers prioritise compatibility with their existing router.
System size and running costs Compare the number of nodes you need, and check the cable route, energy information and support for the exact model. I don’t want to install more equipment than I need for my loft, and I’m considering power consumption and any cabling work. Around 14% of consumers prioritise system size and running costs.

Common mesh Wi-Fi pitfalls

  • Comparing only the advertised speed or coverage

    Advertised coverage isn’t a measurement of performance in your home. Consumentenbond also points out that it’s important to keep as few obstacles as possible between Wi-Fi nodes.

    Test download speeds in the loft and look at possible node locations before choosing the system size.

  • Putting a wireless node in a dead zone

    A mesh node needs a usable connection to the previous node. It can’t restore the signal on its own if there’s virtually no signal where you place it.

    First, try an intermediate location with fewer obstacles. If reception is still poor, compare wired options.

    It can take time to reposition nodes or run a cable.

  • Mistaking a repeater for a complete mesh system

    FRITZ! central mesh features require a compatible FRITZ! mesh master. Don’t assume that a standalone repeater will offer the same features with every provider’s router.

    Check whether you already have a suitable FRITZ! setup. If not, compare a complete system or a wired access point.

    You may need additional equipment to get the mesh features you want.

Brands to compare as a guide

TP-Link

The Deco X50 range includes Wi-Fi 6 mesh systems in different pack sizes. The separate X50-PoE range also offers PoE and more placement options.

  • TP-Link lists three gigabit ports for the Deco X50 and support for wired backhaul within Deco.
  • The advertised speed and coverage don’t guarantee a strong signal in a specific loft. Don’t confuse the X50 with the X50-PoE.

ASUS

The ZenWiFi XD5 is a Wi-Fi 6 mesh option to compare if you want to use multiple nodes or, where possible, ethernet backhaul.

  • ASUS describes ethernet backhaul and app-based setup for this model.
  • You’ll need a Wi-Fi 6 device to benefit from the Wi-Fi 6 features mentioned. ASUS also notes that 160 MHz may be restricted in some regions; advertised coverage isn’t a measurement of performance in your loft.

NETGEAR

The Orbi RBK763S is a tri-band Wi-Fi 6 system with a router and two satellites, which you can compare for features including wireless connections between nodes.

  • NETGEAR lists a dedicated backhaul for this system.
  • This specification doesn’t confirm how the system will perform across the floors of a particular home. Check the exact regional model.

FRITZ!

The FRITZ!Repeater 3000 AX is mainly worth considering as an extension to a compatible existing FRITZ! mesh network, rather than as a replacement for a complete new mesh system.

  • FRITZ! lists two gigabit LAN ports and describes central mesh management through a mesh master.
  • With a router from another brand, you can’t assume you’ll get the same FRITZ! mesh features.

Joybuy mesh products for extending Wi-Fi

These Joybuy picks are mesh systems with two or three nodes for extending Wi-Fi across several rooms or floors. Check the connection options, backhaul you need and applicable product requirements for each exact model.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

A mesh system with two nodes for extending Wi-Fi across several rooms, including if you want to connect the nodes by cable.

The Joybuy product listing specifies 10 Gbps, 2.5 Gbps and 1 Gbps WAN/LAN ports on each node, along with wired and wireless backhaul.

View at Joybuy
TP-Link Deco E4 (3-pack)

TP-Link Deco E4 (3-pack)

A mesh system with three nodes for extending Wi-Fi across several rooms. Check whether three nodes are right for the weak spots in your home.

The Joybuy product listing specifies Wi-Fi 5 and wired ports with a maximum speed of 100 Mbps.

View at Joybuy
ASUS ZenWiFi BT8 (2-pack)

ASUS ZenWiFi BT8 (2-pack)

A mesh system with two nodes for extending Wi-Fi. Check that the AiMesh features you want are compatible with your existing ASUS router.

The Joybuy product listing specifies tri-band Wi-Fi 7 on 2.4, 5 and 6 GHz, two 2.5 Gbps and two 1 Gbps Ethernet ports, and AiMesh integration with compatible ASUS routers.

View at Joybuy
TP-Link Deco X20 (2-pack)

TP-Link Deco X20 (2-pack)

A mesh system with two nodes for extending Wi-Fi. You can connect the nodes using ethernet backhaul if you have a cable route available.

The Joybuy product listing specifies Wi-Fi 6, three gigabit ports per node and ethernet backhaul between Deco X20 units.

View at Joybuy
TP-Link Deco M4 (3-pack)

TP-Link Deco M4 (3-pack)

A mesh system with three nodes for Wi-Fi in several rooms. First, work out whether your loft and the rooms between it and your router need extra nodes.

The Joybuy product listing specifies dual-band Wi-Fi 5 on 2.4 and 5 GHz, two gigabit Ethernet ports per node, a single wireless network and roaming between Deco units.

View at Joybuy

Frequently asked questions about loft mesh Wi-Fi

How many Wi-Fi nodes do I need for my loft?

It depends on the layout and where the signal is weak. Consumentenbond recommends starting with two nodes for better Wi-Fi across two floors and three nodes for three floors, but also notes that two nodes are enough for many homes. First, check where the signal is weak, then decide whether you need extra coverage.

Where should I place a wireless mesh node?

Don’t put the node somewhere the incoming signal is almost gone. Choose an intermediate location with as few obstacles as possible between the nodes, and check the connection using the setup app or the indicator on the device.

Can I keep using my existing broadband router?

This may depend on the connection and the router or access point mode available on the mesh system. Check how the exact system connects to your router and whether the network features you want will work. A connection on its own doesn’t guarantee that all brand-specific mesh features will be available.

What maintenance and ongoing costs should I factor in?

Wi-Fi nodes use electricity while they’re switched on, so compare energy information on the same basis and factor in any cabling work. If a product develops a fault, your statutory guarantee depends on what you could reasonably expect from it. ACM ConsuWijzer explains that this isn’t automatically limited to a fixed period.

Which Dutch rules apply when I buy mesh Wi-Fi?

Mesh Wi-Fi is radio equipment, and products placed on the market in the Netherlands must meet the applicable requirements of the Radio Equipment Directive. The Dutch Authority for Digital Infrastructure states that the manufacturer affixes the CE mark when all requirements have been met. This general framework doesn’t confirm that a specific model complies; check the exact model.