Who might need mesh Wi-Fi in the loft?

Gamers with a Wi-Fi dead spot in the loft

Your connection works by the router, but distance or floors weaken the Wi-Fi signal at your console or PC in the loft.

Households that can run a network cable

You want Wi-Fi in the loft and a wired connection between mesh points, so the route back to the router doesn’t rely entirely on wireless coverage.

Households without a route for a cable

You’re looking for coverage in the loft without installing a new network cable, and want to find out whether wireless placement or your existing power network can provide a usable connection.

What should you look for in mesh Wi-Fi for the loft?

Mesh with Ethernet backhaul

Choose this if: there’s already a network cable between the router and a Wi-Fi point in the loft, or you can install one.

Bear in mind: you’ll need to plan the cable route and use the correct connection. TP-Link says that, with Deco, the satellite should connect to the main unit’s LAN port or to a connected switch.

Wireless mesh

Choose this if: installing a cable isn’t practical and a mesh point in between can still connect to the router.

Bear in mind: floors and other obstacles can also weaken the connection between mesh points.

Powerline mesh

Choose this if: installing a new network cable isn’t an option and the wireless connection between floors seems too weak.

Bear in mind: performance depends on your home’s electrical wiring, so test the connection using the sockets you intend to use.

Move your router or add a single wired access point

Choose this if: moving the router would improve coverage, or only the loft needs extra coverage and there’s already a cable there.

Bear in mind: check coverage on both floors before buying additional network points.

Your choice mainly depends on what’s causing the slow update and on the connection between the router and the loft. The percentages below give an approximate indication of the factors consumers prioritise most when buying.

What to consider What should you check? Who is this most relevant to?
Wi-Fi coverage in the loft Check the signal at your console or PC, and whether the loft point itself has a usable connection to another point. If the Wi-Fi drops out where I game, I mainly want to know whether a mesh point can provide a connection there. Consumers who prioritise loft coverage account for around 36%.
Connection between floors Compare Ethernet, wireless backhaul and, if relevant, powerline. For Ethernet, check how it connects and which ports are available. If the signal between the router and the loft point is weak, I want to know which type of connection between them is feasible. Consumers who prioritise reliable backhaul account for around 29%.
What’s causing slow updates? Compare a wired test by the router with a test in the loft before changing your network equipment or broadband plan. Before I buy anything, I want to know whether the internet connection or the Wi-Fi in the loft is slowing down the update. Consumers who want to identify the download bottleneck first account for around 21%.
Installation and equipment needed Check whether moving the router or adding a single wired point would be enough, and factor in the number of mesh points needed and any cable route. If I only need extra coverage in the loft, I don’t want a more complicated installation than necessary. Consumers who want to minimise extra equipment and installation work account for around 14%.

Which common buying mistakes can you avoid?

  • Buying a mesh system before checking your internet speed

    A mesh system won’t fix a slow connection that’s already slow at the router.

    The Dutch Consumers’ Association recommends running a speed test on a computer connected to your home network with a network cable. Compare that result with a test in the loft before choosing your equipment.

  • Putting a mesh point somewhere with barely any signal

    A strong connection between the loft point and your console won’t help much if the point itself can’t get a usable connection to the router or another mesh point.

    Test the spot you have in mind. If there’s a network cable available there, consider Ethernet backhaul.

  • Assuming the maximum Wi-Fi speed is your download speed

    The advertised Wi-Fi capacity alone doesn’t tell you how quickly a game update will download over your internet connection and the link to the loft.

    Compare measurements at the relevant locations and check the ports on the exact system you’re considering.

Which brands are worth comparing?

TP-Link

The Deco range includes the dual-band Wi-Fi 6 X50 set, which has Ethernet ports. TP-Link recommends the PX50 as an option if floors or walls interfere with the wireless connection.

  • TP-Link explains Ethernet backhaul and the connection requirements for Deco.
  • The X50 won’t automatically guarantee a wireless connection through every loft floor. Check the set configuration, number of units and placement.

ASUS

ASUS describes the ZenWiFi AX XT8 as a tri-band Wi-Fi 6 mesh system for multi-storey homes.

  • The XT8 specifications list three bands and a 2.5G port.
  • Advertised wireless speeds aren’t the same as measured download speeds in your loft. Check the exact kit configuration.

devolo

The Magic 2 WiFi 6 next combines mesh Wi-Fi with data transmission over your home’s electrical wiring, which can be useful when installing a new network cable isn’t practical.

  • According to devolo, the Wi-Fi adapter has two gigabit LAN ports.
  • Whether your home’s electrical wiring is suitable and how many adapters you need are still important things to consider.

NETGEAR

NETGEAR describes Orbi 770 as a tri-band Wi-Fi 7 mesh range, with a two-unit set and a 2.5G option for wired backhaul.

  • The manufacturer lists connection options for a wired link.
  • A newer generation of Wi-Fi doesn’t guarantee a faster game update if your internet connection or the link between floors is the limiting factor.

Mesh Wi-Fi products at Joybuy

These Joybuy products are mesh Wi-Fi systems designed to extend coverage at home. The versions listed vary in Wi-Fi generation, number of units and connection options. Check which wired or wireless connection suits your loft.

TP-Link Deco BE68 (2-pack)

TP-Link Deco BE68 (2-pack)

Could suit you if you want to extend mesh coverage and connect a console or PC to a unit using a cable.

The product description lists a tri-band Wi-Fi 7 mesh system, wired and wireless backhaul, and WAN/LAN ports on each unit.

View at Joybuy
TP-Link Deco X20 (2-pack)

TP-Link Deco X20 (2-pack)

Could suit you if you’re looking for two mesh points and can use a network cable between the units.

The product description lists Wi-Fi 6 and Ethernet backhaul between the Deco units.

View at Joybuy
Linksys Velop Pro 7 Tri-Band Wi-Fi 7

Linksys Velop Pro 7 Tri-Band Wi-Fi 7

Could suit you if you’re considering wireless mesh and may want to add compatible mesh points later.

The product title lists tri-band Wi-Fi 7 with 2.4 GHz, 5 GHz and 6 GHz bands. The product description says it can be extended with compatible mesh points.

View at Joybuy
TP-Link Deco X50-POE (2-pack)

TP-Link Deco X50-POE (2-pack)

Could suit you if you’re looking for a set with two mesh points and want to connect the units using a wired connection.

The description lists dual-band Wi-Fi 6, PoE support and two Ethernet ports on each unit.

View at Joybuy
TP-Link Deco XE75 Pro (3-pack)

TP-Link Deco XE75 Pro (3-pack)

Could suit you if your home’s layout calls for three mesh points and you also want to connect the units by cable.

The product description lists tri-band Wi-Fi 6E and Ethernet ports on each unit.

View at Joybuy

Frequently asked questions

Should you upgrade your internet plan if game updates are slow in the loft?

Not before checking the connection. Run a test on a computer connected to the router with a network cable, then compare it with a test in the loft. A slow speed at the router doesn’t automatically point to a Wi-Fi problem in the loft.

How do you connect Deco points using a cable?

According to TP-Link, in router mode you connect a satellite Deco to the LAN port on the main Deco, or to a switch connected to that port. The permitted connection may differ in access point mode, so follow the instructions for your configuration.

Can you use your own mesh router in the Netherlands?

ACM ConsuWijzer confirms that you’re free to choose your router. Additional connection and safety requirements apply to your own modem. A provider may refuse an unsafe device and can supply the settings you need.

What marking should Wi-Fi equipment for the Dutch market have?

According to the Dutch Authority for Digital Infrastructure, the equipment must display the correct CE marking. Check the version you’ll actually receive: a similar model name alone doesn’t confirm that it meets the applicable requirements.