Family with Wi-Fi problems in the loft
Wants to stream media upstairs while the existing router is downstairs; the connection between floors determines whether an extra Wi-Fi point will help.
If your current router is still doing the job, start by looking at the connection to your converted loft. A wired access point or wired mesh node is a good fit if you have an Ethernet cable there. If not, wireless mesh could be an option, provided the extra node still gets a usable connection to the rest of your network. Only replace the main router if its features or connections are also falling short. For DLNA media, Synology describes devices on the same network.
Wants to stream media upstairs while the existing router is downstairs; the connection between floors determines whether an extra Wi-Fi point will help.
Has, or can run, an Ethernet cable upstairs and wants to keep the media server accessible without replacing the main router unnecessarily.
Wants the TV or media player in the loft to find the local server. Network setup and any guest network separation matter just as much as the stated Wi-Fi speed.
First decide whether to keep your existing router and how the network will reach the loft. Then choose your equipment and operating mode.
Suitable when: there is, or you can install, an Ethernet cable to the loft and the main issue is poor Wi-Fi coverage there.
Bear in mind: the cable route and, with a standalone access point, its power supply and management. According to TP-Link, some Deco router features are unavailable in access point mode.
Suitable when: running a cable is not practical and a mesh node between the router and the loft can still get a usable wireless connection.
Bear in mind: floors and building materials affect the connection, and the stated coverage is not a measurement of your home.
Suitable when: the current router’s features or connections are also falling short, as well as coverage in the loft.
Bear in mind: replacing the router alone does not guarantee coverage in the loft. Also check the connection to your modem or broadband provider’s network.
| What to consider | What to look for | Who should pay particular attention? |
|---|---|---|
| Loft coverage | Check where an extra node could go and whether it would get a usable connection there. Also see if running a cable is possible. | If the router is downstairs, I want to stream media upstairs without the connection dropping out. Around 33% of consumers prioritise loft coverage. |
| Server accessibility | Check the network mode and whether the player can find the local server; look out for guest network isolation. | I want my TV or media player to find the local server after extending Wi-Fi. Around 27% of consumers prioritise access to their media server. |
| Cabling and ports | Count the connections needed for the uplink, server and playback device; check whether the system supports a wired connection between nodes. | If I prefer to connect fixed devices by cable, I want to know whether there’s a cable route and enough suitable ports. Around 27% of consumers prioritise the stability of a wired connection. |
| Overall setup | Compare the extra nodes, cabling and power supplies you’ll need; check which features remain available in the selected operating mode. | I don’t want to replace a router that’s still working well without good reason, and I take installation and management into account. Around 13% of consumers prioritise the total purchase and management costs. |
According to TP-Link, actual throughput and coverage depend on factors including building materials, obstacles and connected devices. You may need an extra node or cabling if the connection to the loft is not usable.
Count the Ethernet ports you’ll need and check how the access point is powered before choosing your setup.
The Deco X50 is an expandable Wi-Fi 6 mesh option that can work as a main router or in access point mode. The XE75 is a separate tri-band Wi-Fi 6E option.
The UniFi U6+ is a standalone access point for anyone keeping their existing router and with an Ethernet connection in the loft.
The FRITZ!Box 4060 is a main router option for anyone who wants to replace their existing router as well as extend Wi-Fi coverage.
This selection focuses on extending Wi-Fi across multiple areas of your home with mesh systems, plus a router option for anyone looking to replace their main router. For each model, check that the connections and operating mode suit your media server setup.
Image unavailable
A set of two units for anyone looking to extend Wi-Fi across several areas of their home.
Check whether your chosen setup supports a wired connection between the units and how many Ethernet ports are available for fixed devices.
Image unavailable
A mesh system with two units for anyone looking to extend Wi-Fi to more than one area of their home.
Tri-band (2,4/5/6 GHz); Wi-Fi 7 (802.11be). Check that the features and connections suit your network setup.
Image unavailable
A mesh option for anyone looking to extend Wi-Fi across several areas of their home and considering a wired connection between nodes.
Dual-band (2,4/5 GHz); Wi-Fi 7 (802.11be). Check the connections and the setup you need for fixed devices.
Image unavailable
A set of three units for anyone looking to extend Wi-Fi across several rooms.
Dual-band (2,4/5 GHz); Wi-Fi 5 (802.11ac). Check how many Ethernet ports are available for your fixed devices.
Image unavailable
A main router option for anyone looking to replace their router and considering extending their network with AiMesh.
Dual-band (2,4/5 GHz); Gigabit Ethernet. A new router alone does not guarantee Wi-Fi coverage in the loft.
Not necessarily. If your router is otherwise doing the job, an access point or mesh system in access point mode can extend your existing network. Running a cable to the loft is worth considering if the wireless connection between floors is weak.
First check that the player and server are on a local network they can both access. Synology describes its Media Server as supporting devices on the same network; also check the access settings on the server you’re using. Other media servers may have different settings.
According to TP-Link, satellite nodes in access point mode can be connected by cable through a Deco node or the existing main router. Let your existing router assign IP addresses, follow the manufacturer’s setup instructions and check in the app that the connection is wired.
Radio equipment placed on the market in the Netherlands must meet the applicable European requirements. Once conformity has been established, the manufacturer affixes the CE marking, according to the Dutch Authority for Digital Infrastructure. Check the EU version and accompanying documentation for the specific device.
No. The Dutch Authority for Digital Infrastructure gives Wi-Fi as an example of licence-exempt frequency use, with no notification or registration requirement. This is separate from the product requirements for radio equipment placed on the market.