Who is this choice relevant to?

Working from home in the loft

You want to find out whether dropped calls are caused by your internet connection or weak Wi-Fi in the loft, then choose a connection for your workspace. The Consumentenbond recommends connecting a computer to your home network with a cable before running a speed test.

A multi-storey household

You need coverage in more than one area and want to weigh up whether to connect your mesh nodes wirelessly or via Ethernet. TP-Link describes both connection options for the Deco X50.

Using both old and new devices

You want to keep your existing devices connected while choosing the security settings for a new router or Wi-Fi extender. The Consumentenbond points out that older devices don’t always support WPA3.

What should you look out for?

Wired access point

Choose this if: there is, or you can run, an Ethernet cable to the loft and your existing router manages your internet connection.

Bear in mind: you may need to run a cable, provide power and manage an additional device. Check what comes with the access point you choose.

Mesh with multiple nodes

Choose this if: you need coverage in the loft and elsewhere in your home. Ethernet backhaul is an option if there’s a cable between the nodes.

Bear in mind: with a wireless setup, each intermediate node still needs a good connection. The quoted coverage isn’t a measurement of performance in your home.

Standalone router

Choose this if: you also want to manage or replace your router settings and can place the router somewhere suitable for Wi-Fi.

Bear in mind: a single router doesn’t guarantee coverage through floors. If you’re replacing equipment, check your provider’s connection requirements.

What to consider What should you check? Who should pay particular attention?
Wi-Fi in the loft Compare a wired test at the router with Wi-Fi tests in the loft and at potential locations for an additional node. If I work upstairs, I want to know whether Wi-Fi is good enough at my workspace and where an additional node should go. Around 29% of consumers say loft coverage is their top priority.
Reliable connection for work First test the connection by cable at the main router. Then check whether you need an Ethernet connection to your work computer or a wired Wi-Fi access point. For calls and work in the loft, I want a reliable connection and to tell the difference between an internet problem and a Wi-Fi problem. Around 29% of consumers prioritise a reliable wired connection for work.
Different devices Check which Wi-Fi bands and security settings your devices support, especially if some are older. If there are both old and new devices at home, I want them to stay connected with the settings I choose. Around 24% of consumers say compatibility is their top priority.
Management and security Check which features are available in the mode you choose, how updates work and what power supply or equipment your setup needs. When setting up my network, I want to manage updates and settings and know in advance what the setup requires. Around 18% of consumers put management and security first.

Common buying mistakes

  • Buying a faster router without testing first

    A wired test helps you work out whether the internet connection itself is slow or whether it’s mainly the Wi-Fi in the loft that’s struggling.

    First test the connection by cable at the router, then test Wi-Fi in the loft, as the Consumentenbond recommends.

  • Assuming the advertised range guarantees coverage in the loft

    Floors and other obstacles affect coverage. Advertised speeds and coverage areas don’t predict how Wi-Fi will perform in your home.

    Test the signal in the loft and at potential locations for additional nodes, and check the connection between mesh nodes.

  • Expecting router features from a mesh system in access point mode

    According to TP-Link, some Deco features aren’t available in this mode.

    Decide in advance whether your existing router or the new system should manage the network, and check which features work in that mode.

  • Treating an access point as a complete replacement for your router

    The Ubiquiti U6+ is an access point with PoE power and a single network port, not a replacement modem.

    Check which router, cable, power supply and management equipment you already have for your planned setup.

Brands to consider

TP-Link

The Deco X50 is a mesh option for getting Wi-Fi into several areas, with optional Ethernet backhaul. The size of the set determines how many units you buy.

  • TP-Link specifies dual-band Wi-Fi 6 and three gigabit ports per unit for the Deco X50.
  • The quoted coverage and speeds aren’t a measurement of performance in a multi-storey home. According to TP-Link, some features aren’t available in access point mode.

ASUS

The RT-AX58U is a standalone Wi-Fi 6 router for anyone who wants to choose their own network setup.

  • ASUS lists router, access point and AiMesh modes among the features of this model.
  • You’ll need a suitable additional unit for AiMesh coverage in the loft. The specifications for a single router don’t show what coverage you’ll get in your home.

FRITZ!

The FRITZ!Box 4060 is a router that can be connected to a separate modem, with mesh options within the FRITZ! range.

  • According to FRITZ!, this model has a 2.5-gigabit WAN port and three gigabit LAN ports.
  • It isn’t a standalone modem for every type of direct connection, so check how your internet service is provided.

Ubiquiti

The UniFi U6+ is suited to a setup where you keep your existing router and run a network cable to the loft.

  • Ubiquiti specifies one gigabit port and PoE power for this access point.
  • It isn’t a standalone replacement router, so check the power supply and management setup you’ll need in advance.

Joybuy products for loft Wi-Fi

This selection includes mesh systems for coverage in several areas, plus a standalone router that can be expanded with AiMesh.

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 mesh system

TP-Link Deco E4 (3-pack), dual-band Wi-Fi 5 (802.11ac)

A mesh system with three units for bringing Wi-Fi to several areas.

The product information lists dual-band 2.4 and 5 GHz and two network ports per unit. The maximum speed specified for these ports is 100 Mbps.

Joybuy
ASUS ZenWiFi BD4 dual-band Wi-Fi 7 mesh system

ASUS ZenWiFi BD4, dual-band Wi-Fi 7 (802.11be)

A mesh option for extending Wi-Fi to several areas.

The product description lists dual-band 2.4 and 5 GHz and an option for wired backhaul.

Joybuy
ASUS RT-AX52 AX1800 AiMesh dual-band wireless router

ASUS RT-AX52 AX1800 AiMesh dual-band router

A standalone router for anyone who wants to choose their own router setup, with the option to extend it using AiMesh.

The product information lists Wi-Fi 6, dual-band and gigabit Ethernet. You’ll need another compatible ASUS router to extend the setup with AiMesh.

Joybuy
TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 mesh system

TP-Link Deco X50 (3-pack), dual-band Wi-Fi 6 (802.11ax)

A mesh system with three units for anyone who needs Wi-Fi in several areas.

TP-Link lists optional Ethernet backhaul for the Deco X50. The product information also mentions gigabit Ethernet ports on each unit and support for older Wi-Fi standards alongside Wi-Fi 6.

Joybuy
Huawei eKit OptiX FG736 BE3600 dual-band Wi-Fi 7 mesh router

Huawei eKit OptiX FG736 BE3600, dual-band Wi-Fi 7 mesh router

A mesh router for anyone considering a dual-band Wi-Fi 7 setup.

The product title specifies dual-band Wi-Fi 7.

Joybuy

Frequently asked questions

Do I need to replace my internet provider’s router?

No, not always. First test the connection by cable and check the Wi-Fi in the loft. If coverage is the main issue, you can keep your existing router and add Wi-Fi coverage.

Can a Deco system work alongside my existing router?

Yes. According to TP-Link, Deco can extend an existing wired network in access point mode. Your existing router will continue to assign IP addresses, among other things, while some Deco router features won’t be available.

What should I maintain after installation?

Check for updates for your router and devices, and install any available security updates. If you change your Wi-Fi security settings, also check that older devices can still connect. Automatic updates depend on the model.

Can I use my own router in the Netherlands?

According to ACM ConsuWijzer, you have the right to choose your own router, although this doesn’t apply in every case. Check with your provider to find out which settings your connection needs and whether the device you’ve chosen is suitable.

Do I have rights against the seller as well as a manufacturer’s warranty?

Yes. ACM ConsuWijzer explains that your statutory rights exist alongside the seller’s warranty. What you’re entitled to depends on the product and the circumstances.