Gamer with weak Wi-Fi in the loft
You download updates on another floor and notice that the connection drops there. The layout, the floor and whether you can add another Wi-Fi access point will all affect what you should consider.
First, test your internet speed using a network cable and compare it with the Wi-Fi in your loft. A new router can’t make a slow internet connection faster. If the signal is weak mainly because it has to pass through the floor, consider where to place a Wi-Fi access point and whether you can use a wired connection. A standalone router is more suitable if your coverage is already good but you need extra ports or features.
You download updates on another floor and notice that the connection drops there. The layout, the floor and whether you can add another Wi-Fi access point will all affect what you should consider.
You can use or install a network cable and want to decide whether to connect your gaming device directly or set up a Wi-Fi access point with a wired connection.
You already have usable coverage in the loft, but are comparing the connections and features of a new router with what your internet connection and devices can support.
Choose this if: your wired internet speed is suitable and moving the router could improve Wi-Fi in the loft. The Consumers' Association recommends testing your connection first.
Consider: you may need a cable to move the router, and a better position doesn’t guarantee coverage through the floor.
Choose this if: one well-positioned device can reach the loft and you need specific connections or settings.
Consider: a higher advertised Wi-Fi speed doesn’t prove that downloads will be faster through a floor. Check the connection and gaming device too.
Choose this if: one router can’t reach the loft properly and running a cable isn’t practical. Place an additional unit where it can still connect to the previous one.
Consider: the connection between units will still depend on distance and obstacles, and extra units need space and power.
Choose this if: there’s a network cable running to the loft, or you can install one, and you want Wi-Fi there or a wired connection for your gaming device.
Consider: check the cable route, available ports and the correct router or access point mode in advance. TP-Link describes Ethernet backhaul for Deco as a wired connection between mesh units.
The Consumers' Association recommends comparing your wired connection with Wi-Fi in the loft. Also consider whether you can run a cable, where to position your equipment and how many ports your gaming device and Wi-Fi access points need.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Coverage in the loft | Compare Wi-Fi by the router and in the loft; check the positioning and whether you need extra units. | If I game in the loft, I want usable Wi-Fi there despite the floor and distance. Around 40% of consumers put coverage first. |
| Wired connection | Check whether you can use a cable and whether there are enough spare ports. | If I can run a cable to the loft, I want to connect my gaming device directly or wire the connection between Wi-Fi units. Around 30% of consumers prioritise a stable wired connection. |
| Cause of slow downloads | First test the connection using a cable at the modem, then compare it with Wi-Fi in the loft. | If an update is downloading slowly, I want to know whether the internet connection or Wi-Fi is the bottleneck before replacing any equipment. Around 20% of consumers want to identify the cause first. |
| Features and connections | Compare your gaming device’s Wi-Fi support with the ports and expansion options on the exact model. | If the coverage is already usable, I only want to pay for features and connections that my devices can use. Around 10% of consumers weigh up router features first. |
A wired test helps you distinguish the speed of your internet connection from Wi-Fi performance in the loft. A router can’t fix a limitation with your internet connection.
Test using a network cable first, then compare the Wi-Fi in the loft before choosing equipment.
An extra unit may need space and should be placed somewhere it can still get a good connection to the previous unit.
Connecting a router behind your provider’s modem isn’t the same as replacing the modem itself. If you replace it, the connection type and provider settings may matter.
Decide which of the two devices you want to replace. If you’re replacing the modem, check which connection details you’ll need.
The right setup may require extra equipment or time to configure.
The Deco X50 range is worth considering if you want to use mesh units to bring Wi-Fi to the loft.
The RT-BE58U is an example of a standalone router to consider if you’re looking at router settings and expansion through AiMesh.
The FRITZ!Box 7690 is worth considering if, as well as Wi-Fi, you need a suitable DSL router, telephony or features from the FRITZ! ecosystem.
The Orbi RBK852 is a two-unit mesh system to compare if you need a wireless connection between floors.
These Joybuy products include wired access points, mesh units and standalone routers for a gaming space in the loft. Before choosing, check your cabling options, the connections you need and the Wi-Fi support of your devices.
No image available
A wired access point to consider if you have a network cable running to the loft.
Check that you can use a compatible PoE+ power supply (802.3at) and manage it through the UniFi Network platform.
When it arrives, check that the required CE marking is on the device supplied.
No image available
A two-unit mesh system for anyone who wants to use Wi-Fi in several places between the router and the loft.
The product information lists Ethernet backhaul as an option. Check that the cabling and available ports suit your setup.
When it arrives, check that the required CE marking is on the device supplied.
No image available
A standalone router to compare if one router is right for your situation.
Mesh expansion requires a second AiMesh-compatible router. Also check that the Wi-Fi bands are suitable for your gaming device.
When it arrives, check that the required CE marking is on the device supplied.
No image available
A three-unit mesh system to consider if you need several placement points around your home.
The product name lists the 2.4, 5 and 6 GHz bands. Check that the devices you want to use support these Wi-Fi features.
When it arrives, check that the required CE marking is on the device supplied.
No image available
A two-unit mesh system for anyone looking to improve the connection to a loft on another floor.
TP-Link lists three gigabit ports per unit and optional Ethernet backhaul for the standard Deco X50. Check which ports will remain available in your setup and whether you can run a cable between the units.
When it arrives, check that the required CE marking is on the device supplied.
First, test with a computer connected by a network cable, then compare the result with Wi-Fi in the loft. The Consumers' Association recommends using a wired connection to assess your internet speed. A Wi-Fi test alone won’t clearly show which of the possible bottlenecks is causing the problem.
The connection depends on the system and its operating mode. For Deco, TP-Link describes setting it up wirelessly in the app first, then connecting it with a cable. In router mode, satellites must be connected to the LAN port on the main Deco or to a switch connected to it. For other systems, follow the relevant instructions.
Check which features work without a subscription and review the terms of any security services. Also consider the power consumption of additional Wi-Fi units. The Consumers' Association includes energy use in its mesh tests.
Yes. ACM ConsuWijzer confirms that you can choose your own router. A provider may refuse to allow a device under certain conditions, for example if it’s unsafe. Connecting a router behind your provider’s modem is different from replacing the modem. If you choose the latter, the connection type and provider settings may be decisive.
According to the Dutch Authority for Digital Infrastructure, the required CE marking must be on the equipment. Check the marking on the device supplied and follow the installation instructions. An online product description doesn’t confirm that the marking is on your particular device.