Who is this lighting for?

For artists making flat reproductions

You want to photograph a complete, unframed linocut print evenly for a portfolio or product listing, and can position two light sources on either side of the work.

For artists who want to show the print and paper

You want the paper’s texture or the raised ink to remain visible, and are prepared to adjust the direction of the light to suit the individual print.

For artists with a small home studio

You set up the lights each time you use them and put them away afterwards, so you’re weighing up a complete kit against a standalone light modifier and the components you’ll need.

What should you look for when choosing?

For reproducing flat artwork and prints, Broncolor recommends using two or more soft light sources of similar power, positioned at around 45°. Treat this as a starting point to test, not a guarantee that the paper’s texture will remain visible.

What to consider What should you check? Who is this important for?
Even lighting Check that you can position each light source separately, and take a test shot from edge to edge. If I want to capture the whole unframed print evenly, I need to be able to position both lights properly and check the illumination right to the edges. Around 36% of consumers give even lighting top priority.
Paper and ink colour Check the specifications of the supplied lights, and keep the lighting conditions and white balance consistent in your test shots. If the paper and ink colours in the photo need to match the print, I want to keep the lighting and white balance consistent. For around 29% of consumers, colour reproduction comes first.
Visible texture Compare a symmetrical lighting setup with more directional light, and assess the shadows, sheen and differences in brightness. If I want to show the texture of the paper or ink, I’m prepared to test the direction of the light and assess the shadows. Around 21% of consumers make visible texture their main priority.
Setup and components Compare what’s included in the package, which stands you’ll need and how a standalone softbox attaches. In a small home studio, I want to know in advance which components I’ll need and how to put the setup away after use. Easy setup is the most important buying priority for around 14% of consumers.

Common buying mistakes

  • Comparing a complete kit with a standalone softbox as if they were the same product

    A complete kit may include lights and stands, while with a standalone softbox you’ll need to arrange the light source and a compatible fitting yourself.

    Compare everything included in the package and check that the fitting is compatible with your existing equipment.

    With a standalone softbox, you may still need to arrange a compatible light source, speedring or stand.

  • Assuming soft, symmetrical light will show every print to best effect

    This setup can help to create even lighting for flat work, but it can also flatten surface texture.

    Take a test shot with even lighting and another with more directional lighting before choosing your setup.

  • Assuming a stated colour temperature guarantees true-to-life colours

    The colour of the light alone doesn’t determine whether the camera captures the paper and ink exactly as they look in real life.

    Keep the lighting consistent, set the white balance to match the shooting conditions and compare a test shot with the print.

Brands and product ranges for reference

The product ranges mentioned differ in several ways, including complete continuous-light kits, flash kits and standalone light modifiers. Check which components are included with each version and whether the fitting is compatible with your light.

NEEWER

The NK200 is a continuous-light kit designed for two lighting positions when photographing a flat print.

  • The European product information describes two 60 × 60 cm softboxes and two stands.
  • The kit may include two or three 35 W, 5700 K E27 LED bulbs. Check which version is on offer; these specifications don’t guarantee exact colour reproduction or visible paper texture.

Falcon Eyes

The LED-ESB5050K2 is a foldable continuous-light kit with two softboxes for a home studio setup.

  • According to distributor Benel Europe, this version includes two 50 × 50 cm softboxes, two stands and two 25 W E27 LED bulbs; the stated CRI value is 98.
  • The stated CRI value is a product specification, not an independent measurement of how accurately a linocut print photo reproduces colour.

Godox

The MS200-F is a kit with studio flashes and softboxes; the SB-FW6090 is a standalone light modifier for a compatible Bowens fitting.

  • Godox describes the MS200-F kit as including two flash heads, two softboxes, stands and a trigger.
  • The standalone 60 × 90 cm SB-FW6090 softbox has a Bowens fitting and doesn’t include a working light source. Flash lighting requires different operation from continuous LED lighting.

Elinchrom

The 60 × 80 cm Rotalux Recta is a standalone, collapsible light modifier for anyone who already has suitable lights.

  • Elinchrom describes adjustable internal and external diffusion.
  • The speedring must be bought separately and must be compatible with the light fitting. The softbox isn’t a complete lighting kit.

Related products

Related products coming soon.

Frequently asked questions

Do both softboxes always need to be at 45 degrees?

No. Broncolor suggests using two or more similar soft light sources at around 45° as a starting point for flat reproduction, not as a fixed rule for every linocut print. Compare how evenly the print is lit and how visible the paper’s texture is with a test shot using more directional light.

Can you attach a standalone softbox straight to your existing light?

Only if the softbox fitting is compatible with your light. The Godox SB-FW6090 has a Bowens fitting; for an Elinchrom Rotalux Recta, you’ll need to choose a separate speedring that fits your light.

How can you keep colours consistent across repeated shots?

Keep the lighting as consistent as possible and set the white balance to match the light you’re using. Canon Europe explains that you can also adjust the white balance of RAW images during post-processing; even so, compare the result with the original print.

What are your rights if a light you bought online is faulty?

For a consumer purchase in the Netherlands, the seller must provide a product that is fit for purpose. The Dutch government states that when you buy from a business at a distance, you will often also have a 14-day cooling-off period; check which exceptions apply to your purchase.

Is CE marking required for studio lighting?

The NVWA states that CE marking is compulsory for electrical consumer products. Check for this marking when buying an electric light or flash head; a separate passive softbox isn’t automatically an electrical product.